Siraya Tech Simple Water Washable 3D Printer Resin - Low Odor, Easy to Print, High Precision 405nm LCD UV-Curing Aqua Resin - Ideal for 8K Capable LCD, DLP 3D Printers (Grey, 1kg)

Update: After burning through an entire bottle and a half of this material and messing with different settings, I think I've figured it out. I'm bumping it up to 4 stars for this reason. The issue I was having with this was that I was washing it for too long before curing it. I find if you put this into a water/alcohol solution for more than 2-3 minutes, it basically makes the entire print rubber and incredibly difficult to work with.I bought this more expensive "water washable" resin as it claims to be non brittle, well, that isn't the case. Printed off a test miniature model from One Page Rules (Gator) and just the same as with the Elegoo water washable, which is a lot cheaper by the way, it snapped effortlessly with basically no bend at all. The resin itself is great, if you don't need any flex, but if you need something that isn't too brittle look elsewhere. It's a little bit better than the Elegoo in that regard, but it's a lot more money. I'm also having an issue with some kind of black substance floating around in the resin as well, I have to filter the entire bottle every print out of the vat and back into the vat to try to keep it out, whatever it is. I find this product to be basically worthless for minis, I just had 3/10 minis snap while removing the supports. When printing the supports are so flimsy they actually move around and I've noticed that they keep fusing to the model, where they shouldn't even be touching the model at all.Won't be buying this ever again, I only wish I didn't get two bottles.

A little too costly for what it is.Otherwise worked well enough.Issues with it being brittle after curing.

3Dプリンターを使い始めて1年にも満たない初心者ですがSNSなどの評判をみて購入。メーカーが配布しているChitubox用の設定ファイルいじらずそのままで室温約20℃でプリント。消毒用エタノールを15%前後に希釈した水溶液で洗浄→ドライヤーで乾燥→78Wのネイル用LED UVライトで二次硬化という工程を行いました。造形物をノギスで計測して元データと比較したところ0.1mm以下の誤差でプリントできていて驚きました。またエッジもダレることがなくかなりシャープに造形できました。（プリンターはELEGOO Mars2）液体の状態はSK本舗の水洗いレジンと比べて粘度が低くサラサラ。硬化後の色合いはサーフェイサーよりも薄いライトグレーです。15%のアルコールで洗浄可能なため水洗いレジンに準じた使い方ができ、精度も高く、かつ価格も安い、と初心者にもとてもおすすめできるレジンだと思います。

Not only does it not smell bad but easy cleanup as well, I have tried a few dif resins and have found out this by far works awesome even when temperatures change within 20 degrees. It does NOT affect the print in any way, started printing in 74 degree ac quit while I was away came back at 83 degrees and it looked just as good as it did at 74. Was very impressed no loss of detail nor did it lose printing qualities. A++

This resin prints much faster and is thinner than Elegoo resin (the only other brand I have tried).I was able to tweak my print speeds on my Mars 3 Ultra from 3s down to 1.75s. I also had to lower my base from 35s down to 17s because it was difficult to remove from the plate.I had good luck mixing it with my cheaper Elegoo resin.If this resin was cheaper, I would only use it.By the way, "water-washable" just means it needs 15% alcohol to wash it. Because i was mixing resins, I ended up just using 100% wash. It seems like it still be washed at 100% but its more tolerable to lower percent wash.