BCH600ml Printer Ink Refill Kit for Canon Inkjet Printers - Compatible with PG-240 243 245 CL-241 244 246 XL Refillable Ink Cartridges - 6 Bottles x 100ml Bulk Ink

I went very in-depth with this review in case any other homeschooling parents happen to see this. I of course am hopeful it helps anyone that may need help deciding if this is right for them, but as a mother that homeschools I know how incredibly valuable this product is and will continue to be. If you want a quick soundbyte letting you know my thoughts, they are the this product is amazing and worth every penny! If you want more info, keep reading.First I will say that I personally own a canon pixma TS3122 printer. The cartridges I refilled using this kit where the CL-244 color ink cartridge and the PG-245 black ink cartridge.On their own I paid $18 for the black and $22 for the color. These last me almost a month each, if I print sparsely. Which after my first month of homeschooling I realised I would have to do in order to not spend $80 a month on printer ink. The last time I went to buy ink I was searching for a lower cost alternative. I came across this product and was intrigued by the thought of saving some money. At $18 I figured it was worth a shot. If it didn't work it wouldn't be a big loss.I am so far beyond glad I made that choice!!! By my calculations this kit will save me between $500-$1500!!!!!! That is an insane savings!I am going to tell you now about how the kit worked for me and explain the plethora of pictures I attached to my review. First off I found a video on youtube explaining how to use these types of kits and watched it to familiarize myself with refilling ink cartridges.Once I did that I started the process. Hand drilling the refill holes takes about 3-5 minutes per hole and does wear your hand out a bit, but you only have to do it once so not a big deal. I attached a picture of one hole not fully drilled so you could see that you have to go in pretty deep before you will reach the ink cavity.I put 7ml's of black ink into my cartridge since they are supposed to hold 8, I figured go one shy to make sure I didn't have leakage. I put 3mls in my red cavity, and 4 mls in both my blue and yellow since they were more dry than the red. To determine which ink was in which spot I simply inserved a tooth pick in each one to get the color.I was careful and very slowly depressed the plunger each time I was refilling so could make sure I didn't overfill. I'm not sure what the white stickers that came with the kit are for, I used them to identify each color port for future refills.After I was completely done I put the stickers back on and threw them in the printer. I attached before and after pictures of papers I was trying to print. You can see for yourself how much of a difference it made to have ink again.I highly recommend this kit to anyone that prints often, save yourself a ton of cash and refill your cartridges!!!!Update : 2 months later and I haven't even begun to make a dent in my ink supplies. I've refilled my cartridges at least 5 times and you can barely tell in my ink levels. I did find I had to go into my setting on my printer and force stop the change cartridge notification. With my cannon pixma it will not allow the printer to print when it thinks the cartridge is empty, so even though I had just filled them it thought it was empty because the original cartridge had been emptied before I refilled it at home. Nothing a 5 second setting adjustment couldn't fix, just giving everyone a heads up you may have to do the same. These companies don't want us doing the cheaper option of re-filling over buying brand new expensive cartridges. So they put in a setting that won't allow you to print with a refilled until you change the setting.Update 2: 7 months later and I still love this kit. I have used enough ink at this point that you can see just under an inch of empty space in each bottle. That blows my mind. I have printend out a plethora of homeschool work, birthat banners and literally 2 full books. Still going strong. I am still using the original cartridges with no issue. I have no reason to continue updating this other than the outstanding amount of money this kit has saved me and the hopes that it can help other people like me.If this review was helpful to you please hit the helpful button, not sure what that does outside of getting to actually see that I helped other people out which in its own is pretty dang awesome.

This ink is great. Lasted me 4 years and had no issues. Ordered again

Received the product. Although there was a video online, they should still have instructions in the box on how to use it. It is also, good to know how much you need to put into each cartridge, based on your type of printer. After researching for my Canon Pixma MG-3620, I put 3ML in each chamber of the Color Cartridge and 5 ML for the Black Cartridge. I also read that to let the cartridge(s) sit for 8 hours before using, which I did. It also suggested to do a Black Line Test run. I figured that if the 1st printout did not come out good, I would do that. But it turns out, that after I waited the 8 hours, the printing was fine. I don't know how long the ink will last, since the print screen shows the ink as low. But since, now, I have an abundance of ink, I'm not too worried.For readers to know, it was very easy to make a whole in the cartridge by using the tool provided with a hammer and gently tapping on top of the tool head, a few times, to make a perforation. I hardly got any ink on my gloves or on the covered surface. Remember to gently wipe, with a soft cloth, the area where the printer scans your cartridge.Overall would recommend.

So This value is incredible, the problem is no directions. And you will run into problems Bch have alot of videos but they are too long and dont really give you great point of views.A couple tips. If you dont have the primer tool vacuum cleaner hose works fine. Cover the cartridge in a paper towl put the part where the ink comes out in the bottom and suction away.\If you havent used your printer in a while my suggestion is to let the cartridge sit in boiling hot water for 5 min then put it in alcohol only enough water to cover 1/3rd the cartridge, then do the Vacuum trick and you should be unclogged.Another thing is patience when I first did the color I went to print it came out pink I let it sit for 5 hours and did a deep cleaning it still was purple, took cart to vacuum suction it, then put it in let it sit another hour was fine.Drilling the holes is dumb, you cant see and the sponge get damaged. just pop the top off its better you can put ink in without damaging the sponges and its very easy to refill.Wear gloves no matter how neat you are it will get messy. it takes 2 3 days to get ink off.Once you do it once the second time is a breeze I never did this took me so long to get it right a day. Then I refilled in 10- mins was clogged went to vacuum cleaner boom done back working.Before you give up make sure ink is coming out, some people say oh it prints blank pages, thats not the ink fault its the clogging of the cart. do steps i said above, almost every cart can be saved.

This is the best ink!Works with my cannon and hp printer!It’s so cheap but it’s got the quality of much more expensive brands!Been buying only from them for the past theee years!

Really customer oriented, clear and easy directions by video. Will definitely buy this product and have been recommending it to everyone I know with a printer.

J'ai vue leur vidéo sur youtube et c'est vraiment simple.L'encre est super et les impressions sont normal comme l'encre extra couteux vendu par canon.Ca vaut la peine de remplir les cartouches aujourd'hui.

Good

Works great!

Perfect ink and color pictures print are great.