Renogy Flexible Solar Panel 100 Watt, 240° Ultra Flex Bendable

Slightly larger than my ecoworthy panel but seems to work well and was easy to hang on the roof of my duck run. Has good power output it’s super lights and has some flex to it which I needed with the rounded roof.

Very nice solar panel, works as expected, easy to install. Recommend

Works awesome! I get about 87 watts of power on a sunny day. I mounted on bed cap rooftop and charging to Jackery battery pack. This is good efficiency.

Light and well made, but next to useless when partially shaded by the boom of my sailboat! :-) Turns out, this has a 9 busbar architecture, not the newer 16bb architecture that's supposed to work better when partially shaded.

I ordered 4 of these panels to install on the top of our pickup camper. They came in very well packaged boxes with foam supports on the sides and corners to protect the panels in transit. I used the preset grommets to attach the panels to the roof of the camper by gluing fender washers with small stainless steel bolts to the roof. We used the system on a four week trip to Alaska in May and June. The panels worked great, charging our camper battery completely every day. We never did have to plug in to power. I will definitely use these panels in the future.

The panels perform well seem durable and are flexible. I’m very pleased with them. They fit the bill for my application. Small amounts of shade do not seem to significantly impact the panels’ output, unlike some i’ve used. I needed low-profile flexible panels to fit on my truck’s topper, between the roof racks. The size of the panels are a perfect fit, and allow 2 to be installed on my roof. I wanted the installation to be easily removable, but to also easily handle highway speeds without me worrying about panels flying off. Utilizing the grommets on the panels allowed me to use M6 tee nuts and M6 machine screws and 1” M6 threaded plastic knobs to hold the panels in place. The grommet placement on the 2 panels I received were identical. I fit the machine screws through holes drilled in the topper. The screws (and large washers) are on the inside of the topper, with the tee nuts on the outside. The screws and nuts are snugly tightened, which allows the plastic knobs to be loosened and tightened without someone inside the topper holding a screwdriver to keep the screws from loosening. I used RTV to seal the holes, which also helps hold the screws and nuts in place without turning. I’ve used similar combos on truck toppers for 30+ years and have never had water leaks. I also attached heavy duty velcro around the edges of the panels, and attached velcro to the topper. The velcro alone holds the panels very well, but I wanted more security for highway speeds, hence the tee nuts and machine screws. I also put a “carbon fiber” looking vinyl wrap on the topper where the panels fit, for abrasion protection. Insulation can be placed under the panels to insulate the topper from the panels, which can get hot. 5 mm foam insulation is what I use.

Used for 3 years, shopping for replacements now. Plastic deteriorated in the sun, became cloudy. Never reached max output, highest measured amperage of the pair of 100 watt panels on the best day when new was 170 watts. Two panels compared in equal sunlight after 3 years, one panel showed less than 50% output of the other. I suspect that this was due to the opacity caused by sun damage and some broken connections between the cells. Overall, they performed as expected but my expectations were not high.

I work from home and the power in my neighborhood goes out a-lot. Bought this solely as a charger for my emergency power backup so I don't have any downtime. Coupled with a Renogy 10A controller and two 100a li-ion battery builds, it's more than enough to keep my backup system fully charged until I need it. It came nicely boxed and arrived quickly. This thing was generating 9V just sitting in my office with ambient light. Only thing I didn't like were the 2 black connection wires. Wish the positive wire was red. I keep having to use a multimeter to figure out which wire is positive since they don't seem to be marked.

The original order was lost by Australia Post - but - Renogy sent a replacement via a different carrier. They were more helpful than Amazon. The panel is a replacement for a 110W flexible panle and the Renogy 100W has greater output - VERY Happy with it.

received on time and in good order. Have not used it yet but looks good quality and I am confident it will do the job charging my lithium batteries.