Pyle Portable Adjustable Laptop Stand - 6.3 to 10.9 Inch Standing Table Monitor or Computer Desk Workstation Riser with Shelf Storage and Height Alignment for DJ, PC, Gaming, Home or Office - PLPTS26

It took me a while to find this stand, but I am very happy that I did. My home recording studio is small and full of outboard recording hardware. Therefore, space is limited. Having these two big drum machines laying flat was taking up a lot of valuable real estate. I wasn’t looking for a regular keyboard stand that sits on the floor, I needed a more compact, two-tier stand that would fit on top of my effects cabinet. This item perfectly matched the idea I had in my head for a table top stand. Needless to say, I was thrilled to find it and made the purchase immediately. Build quality is very good. It is sturdy and meets my personal standards. As you can see in the picture I attached, I am the curator of some very old and fragile music equipment, so I wouldn’t chance the possibility of a cheap stand collapsing and causing damage. Due to the way this stand assembles, it requires that four screws (2 on each side) be be used in order to prevent the top tier from falling forward. Because of this, the stand didn’t give me quite enough room to comfortably use the drum machine on the bottom tier. To solve this problem, I just ran to a local hardware store and bought a couple more of the same size screws that arrived with the stand. This allowed me to lower the middle platform while still keeping the top tier at maximum height. Very happy with things so far! If you’re a musician, you won’t regret buying this in order to save some room. Even though I used it for my drum machines, this would easily work to hold up many types of hardware and will save some space.

This is simultaneously irritating and amazing. I wanted a multi-tier stand for some smaller synths so that I could have them nearby and not create a giant mess of cable spaghetti, and this fit the bill pretty well. The metal isn't as soft as I was expecting it to be, and the middle shelf is a huge help - though, like some others, I wish it was just a tiny bit longer. The pads on the top shelf and bottom feet are a massive help as well. LOOK AT THE PHOTOS BEFORE YOU ASSEMBLE. Seriously. If I had just looked at the photo instead of trusting that I could wing it, the thing would have been done far sooner. It is still a bit of a pain to put together, but there will be at least a little less of you asking "Am I even doing this right?" followed by loud expletives. I also put the stabilizer-rod-whatchamacallits pretty close together so that they go through both the feet and the top shelf just to make sure it doesn't fall. Once it is assembled, however, it's perfect (for me at least). I can fit a smaller key synth on top, and a desktop unit like a Volca or my TD-3 in the middle - though the TD-3 sits at an angle, but that actually works out for me. I haven't weight tested the thing with anything much heavier, but it'll hold my big dumb laptop as well. I wish that the middle shelf was just a tiny bit longer, and that there was more space between the middle shelf and top shelf. I'll update this if I manage to gain a bit more space through reassembly, but it isn't as though it's unusable... just verging on cramped. However, compared to the hackjob DIY things I'd made previously, this does work remarkably well, and I'm glad I ended up with it.

Perfetc for my Laptop!

It's okay, but not fantastic. The reason I say this is because you can't extend it to it's full height and have the shelf on the bottom. I suppose you could if you purchased extra hardware for it. Also, the overhand on the top bars is so fat that it blocks out objects on the lower tray. You are unable to tilt the bottom tray at an angle unless you set it up as it's not designed. However, it is a sturdy stand at a cheap price. It can hold my large X1222 mixer with no fear of tipping. It has a nice size to it. Plenty of room to put stuff on. It would be better if you could adjust the angle of the bars and it had holes on the feet to secure it to a tabletop. All in all not bad for the price.

I looked...and looked...and looked for the "right" desktop sized laptop stand and this has FULLY lived up to my expectations by being perfectly compact, having a storage shelf, and being SOLID!(storage shelf is perfect for my Universal Audio Apollo Audio interface if you have one). Desk is about 50" long, 35" deep and it fits my Panorama P4 key board(42") in front of the Pyle and dual mounted LCD Monitors(first one vertical) set up slightly to the left PERFECTLY! It was a little tricky to put together by myself based on the instructions, and might be easier with the help of someone else to hold parts while screws are put in, but I'm bad at following instructions haha. It has just a little wobble to the the sides but is extremely stable and holds my UA Apollo Twin on the bottom and 2012 MacBook pro up top with FULL confidence! Rubber on the laptop stand grips my laptop well and has the perfect amount of lip to keep it from sliding. Lastly, the air flow I get for my laptop and audio interface is great given how hot they use to get by just sitting on the tabled. Simply said, It completed my studio perfectly.

I am very pleased with this stand. I am using it for Zoom and Skype meetings usng my 10" laptop. The screen size is 10" and the width is 12" and it overhangs the smallest width setting of the stand by 1" on each side. I use the middle platform to hold my external drives. It was easy to assemble and no instructions are provided in or on the box. The only instructions are videos in the Amazon product ad. I gave the stand four stars for assembly because adjusting the height requires complete dissassembly.

DO NOT BUY!!!! Like many others plenty of expletives but unfortunately my expletives got the better of me and I decided to bend it in half and throw it in the trash which led to realize the product is very weak since I bent so easy

Très déçu du produit aucune notice de montage en j'ai mis 2 h à le monter et me rendre compte que le produit supporte un pc certes mais l'étage inférieur ne sert strictement à rien puisque les rajout de barre de fixation ne tienne pas et du coup achat inutile moi je voulais l'utiliser avec ma platine dj pour l'étage inférieur et le pc pour l'étage supérieur mais ce n'est pas possible !!!

good

Brilliant quality, brilliant customer service. Kept me up to date with my order and delivery which actually came sooner than stated which was a bonus. I was a bit worried about the sturdiness of it but it's strong as nails. It's easy to assemble you don't even need instructions. I definitely recommend this to anyone.

Ottimo il materiale e la funzionalità. Ok non sarà un oggetto di design, ma lo preferisco ad altri che lo sono. Lascia il lato inferiore notebook completamente esposto e quindi risce a dissipare molto bene. Il piccolo ripiano inferiore può risultare molto comodo.

Esta bien y funciona