SCITOO Towing Mirrors fit for 1999-2007 for Ford for F250 for F350 for F450 for F550 Super Duty Chrome Side View Mirrors Power Heated Led Smoke Signal Lights Towing Mirror Pair Set

These mirrors arrived and were a direct bolt on. They fit and look Amazing. Problem is, the wiring harness and the adapter are both entirely different than the factory plugs and there is no wiring diagram or instructions in the box. I’ve looked online for wiring diagrams and there is nothing. Can’t find the wire for the heated mirrors even with a power probe. Also, the gaskets that came with them are entirely too thick. Pressing as hard as we could we couldn’t get the bolts through enough to start a nut on them.

Not bad quality. I do recommend JB Weld around the studs like others mentioned (studs screw into plastic housing). Very little wobble/vibration (maybe a little more than OEM, but barely). For passenger side not modifications needed at all. For the driver side, I did use a dremel on two of the tabs for better fitment. Even with the JB Weld, take your time tightening and rotate from stud to stud often. You also may want to use a clamp to get the mirrors to seat enough to get the nut on the studs. I did and it worked well.

Mirrors came and were packaged well and seem to be built well. I bought new mirrors lights to go with it to change the lights from amber to white, unfortunately this mirror has a different shaped light than oem, and when taking out the factory one it broke. Is there a way i can get a new one? Any advice would help

The product came quick and was very well packaged. The mirrors were pretty easy to install on my 2005 Ford F350 4x4 after watching some youtube videos. Before you begin I recommend you roll both windows down BEFORE you pull the door panels and unplug wiring connectors in order to more easily do the job yourself. The mirrors are heavy and can be a challenge to hold in place with the windows up while you install the nuts back on the four studs (I didn't roll it down on the first mirror and it took me about 15 minutes longer than when I rolled the window down for the second mirror). I also recommend you use about a 5 foot long piece of string or cord and tape it to the wiring clip that has to be pulled out of the door in order to reroute the new one back through the same path and back into and through the small hole on the door. Make sure you hook it to the old one BEFORE you pull it out so you can attach it to the new one and pull it back through. If you forget you will have to remove the speaker to feel around to find the wire and feed it to where it needs to get. Overall I was quite happy with the results. If you get everything put back to together and your mirror running light doesn't work check to make sure your plugs "clicked" when you put them back together. I was very upset that they weren't working and it turned out that I hadn't connected the wiring properly. Overall I recommend this product. I no longer have blind spots.

This product works as advertised. This summer i will finish wiring in the lights and heater but the rest works as it should my truck was not wired for the extra operations

I think they could stand to be an inch or two taller but they are FAR BETTER than the originals that came on this truck. Fit and finish is a little sloppy as you would expect from a Chinese product but overall worth the money.

Love the mirrors but the side running lights and blinkers covers were loose I glued them back on strong hold apoxy, looked the other day and my passenger side is missing the cover completly..

Installed the mirrors went in easy look good and plugged right in only bad part one of the screws broke barley tighten it

Mirrors are very nice and fit on my 2006 F 350 perfect but the passenger mirror does not pan in or out. Other than that I love them and I can see perfectly with no blind spots

came in fast and was exactly what i needed.

Fits well and looks good on my 99 ford f350. Good quality, way better view then my old mirrors. Great upgrade! Im happy. Fast delivery too!

People say they dont fit as tight as the factory ones. Actually, they pretty much do.They come with a new foam gasket, your have to torque the nuts down in sequence, keep going around multiple times. You will notice they are looser than they where before as you go around and back to the same nut. This is the foam compressing and moulding to the door frame. Wait a while. let the foam compress, then keep repeating until they stay tight. Don't over torque them. Remember to roll the window down before you take the trim panel off. Have a friend hold them in place while installing is a good idea.Is the glass quality as good as factory? Not exactly, but close. Over all, you can see a lot more than the factory mirrors. all the LED's word, power adjust works fine. They are very reasonably priced and seem well built, look much better IMO. As always, with anything, time will tell.Install time is only around 20-30 mins each.Hope that helps.

great mirrors