ZINUS Korey Metal Platform Bed Frame with Upholstered Headboard, Wood Slat Support, No Box Spring, Easy Assembly, King

The bed is very nice. There is lots of room underneath for storage. The metal isn’t creaky at all and the wood slats are easy to lay down. Worth the price.

Every bed-frame I considered on Amazon had some or more user horror stories on assembly and other issues. I am happy to report that this bed-frame came together with few issues although having had all the parts numbered other than just a few would have made it easier. The YouTube instructions were helpful. For an incredibly cheap price the bed frame looks great, sits flat on the floor, and appears sturdy, strong, and serviceable. I’ve got to work on a better way to attach the bed skirt hiding the legs (and stuff under the bed) and get a bedspread. But even with a bedspread it’s going to be easy to make-up, far superior to the over-priced piece of junk from an overpriced prestige furniture store that I had borrowed from a family member and is now gone!

So I had been looking at all the raised bed frames on Amazon for quite some time. I very much needed to get my queen bed off the floor as I wanted something that would raise it up higher than the traditional caster style bed frame. I didn't need anything fancy but I was amazed at the variety of style and prices. I have taken photos of how it's packaged and the progression of the assembly which wasn't too hard. The only thing I would highly recommend to the manufacturer is that they need to be more detailed on the attachment of the legs. I am normally pretty good at assembling things but I was perplexed by the leg attachment for a bit. I also had two extra bolts/washers that I'm assuming they purposely included. There's no mention that you will have these extra parts. As for attaching the legs, you will have a receiving end that needs to be flushed with the legs and them you will see an opening on the frame part that is a 1/4 loop for lack of a better term that the leg should slide into. There is no mention in the directions to use the hex key to expand the receiver part in the leg piece which allows it to stay in place and lock into the bed frame. The directions are very limited. If you are a visual person then you'll end up looking at the picture of the bed most of the time. I'm very happy with the bed and the bamboo wood strips which are attached by fabric are quick, light weight and easy to throw on to complete the bed. I put the whole bed together alone and in a little over an hour just because I was baffled by the legs going on as mentioned above. So glad I was able to buy it with the Prime days savings. If money wasn't such an issue for me I would have gone with the folding platform instead as those couldn't be any easier. What an easy way to get beds up at a good level for those of us with back issues. My only issue is I have banged my toes and shin on the legs and frame a few times when not paying attention. So watch for that in the beginning. I am looking for a way to make some kind of a bumper on the corners. I do recommend buying this particular bed frame. Does the job for my needs for sure! The directions are fairly limited. You could probably find an assembly video on YT but it's pretty straight forward on getting assembled. Just get all your pieces laid out and make sure you don't lose the included ratcheting tool which makes assembly much faster.

The metal frame is very sturdy and all parts were easy to secure together.The headboard is a nice fabric covering with some foam inside.What isnt great is if you have a spring or hybrid mattress with small coils as I do. Some of the springs can end up not supported at all by slats of wood that are a few inches apart. While the wood slats do hold the weight of the mattress, it allows some springs to not be supported at all. In time, this could cause those springs to poke through the mattress bottom or become misaligned. Because of this, I suggest this frame isnt well supporting hybrid mattresses as it should. More wood slats, closer together or just wider slats would solve this. The 3" or so between the slats is too much.Also the 2 non-slide tapes placed on the top of two of the slats does work really well to keep the mattress affixed. But to move the mattress for rotation or flipping, you will need to pull it straight up with a good deal of force to dettach it. If you do this more than a couple of times, The tape will lose its effectiveness. Just dont peel the top of the tape shield off unless you really need your mattress to be stuck to the frame. The two wood slats that have the tape on them can become dettached from the velcro on the frame if you pull up on the tape.The velcro on the frame helps hold the slats in place and also keeps it quiet when sleepers toss and turn. You might need to realign these slats every few months though as the slats could become worn and move small amounts.The 14" height of this frame does give a full 12" of space to keep things under the bed or just to help keep it cleaner without having to remove the mattress. Also this frame height is great when combined with a 10 or 12 inch mattress so you dont have as much trouble getting into or out of bed.I do wish this frame had some simple little tabs that could be placed on the sides of the frame to help keep the mattress in place. Since the mattress lays on top of the frame instead of recessing a bit into it, it can move around on the frame. The included tape helps but small tabs either built-in or screwed to the frame would have helped.Overall, I like this bedframe. It was affordable but is built quite sturdy. Its main flaw is the distance between the wood slats is too big.

I am really impressed with this bed. I was able to put this together by myself in about a hour. Super easy beginner friendly set up. I love the folded Velcro wooden slats. makes it very easy to add once you're done. I have a 8 inch king mattress(from this same company)....and the best part is no box spring is needed when companies say that it sounds very gimmicky but I kid you not, this bed feels amazing. this is the first bed I've had that I feel comfortable sleeping on without a box spring or other additional support. Ive spent so much money on fancy headboard decorative large beds over the years and this bed was more affordable and the best bed I've owned. 5 stars well deserved!!!!

Me gusto el armazón, los materiales se siente de buena calidad y muy resistentes, solamente tuve un inconveniente con una union ya que el tornillo que trae no entraba bien se queda a medio camino pero se pudo solucionar..deberían tener un poco más de control de calidad , pero en general muy bien con todo

Looks pretty good. Good bed frame. easy to install.

I’m very happy with the quality of this affordable bed frame. I took someone’s recommendation in the reviews and bought some Loctite for the build (I would highly recommend doing this as well - the frame feels very sturdy and does not squeak at all). The instructions were clear and it was quick and easy for 1 person to build. I love the design, the height, that it’s lightweight, and that it has ample storage space underneath. Very much worth it - I feel like this is a steal for the quality!

I read all the reviews prior to purchasing this bedframe. As such, I was a bit hesitant to order it because of the negative reviews (I was concerned about wasting my money). After thinking about it for a few weeks I decided to risk it. Glad I did.I put it together myself in about 20 minutes. All the pieces came in great shape, and the instructions were easy to follow. I then cut down my 4 inch twin memory foam mattress to a 31 inch width to fit, and laid down on it. Wow, was it ever comfortable and strong! I am a mature big beautiful woman, a back sleeper who weighs around 230 pounds--a person who moves around only a little bit when sleeping. I tested it out, moving around on my side too several times. It never creaked, sagged, or moved below me. That without removing the sticky tape to keep the mattress from moving. I'm hoping to post some photos here in the future.Other things I like about it are, compared to other similar bed frames, that the slats are close together giving better support, the velcro keeps them in place doing their their job, it'll be easy to disassemble if I need to for storage, and that it's light weight.I can't speak to the other negative reviews, including the one who's product arrived damaged or broke soon after they got it (which I would be upset about too), only to my own experience so far--which is good. The only reason why I gave it 4/5 stars is because I feel it should have two additional legs, one on each side in the middle, for extra longer-term support. I may cut some extra pieces of wood to do that myself.Now, I can't give it a review for using it as a regular bed, to sleep on it every night (which I won't be doing). However, for my camping needs in sleeping on it for a few days to a week or so at a time, I can see it holding up just fine.I would also recommend buying a good memory foam mattress for it too--as it is so much more comfortable than regular camping foam mattresses I have used in the past. And, like another reviewer, I have ordered some bed leg risers to increase it's height so I can store more camping gear underneath (great idea!).Overall, very good product!

If you are used to inexpensive wooden bed frames, be prepared to move to the next level. The wooden ones do the job, but they are not meant to be taken apart and re assembled too often. They tend to loosen up and get sloppy. I thought I'd give a metal bed frame a go instead. This one bolts together, yet it doesn't look at all industrial and the fit of the pieces is pretty good. No weird blind nuts and threaded tubes either. Its all done with bolts. You even get a ratchet wrench with it. Yes, it has a center post, and the wooden slats are held in with Velcro; none of the "other" style with the slats held in with peg posts at the end. The slats are one piece - they go across from side to side in one length and are held in place with Velcro. I am SO tired doing hand to hand combat with 2 piece slats with the peg posts on the first slat Grrrrrr..... . So what stops the mattress from sliding off the end? Two slats have a sticky strip that the mattress sits on. Its literally held on with double sided tape. No worries. The Velcro slats and the sticky tape have the mattress locked down good.This bed frame is SOLID. Its nothing special.... not really, but it does the job with little drama and is dead easy to put together. They even give you some extra bolts. By the way, there are no nuts. The bolts thread into the metal pieces.This is an excellent bed frame. For what I paid and having dealt with wooden bed frames (think imported from a Scandinavian company) this is NO contest. I'd do it again in a heart beat. Inexpensive wooden bed frames? I'm done.