WP17 Air-Cooled Tig Torch With 13FT Cable Plug 16M-2 M16*1.5 Connector (WP17 black handle)

perfect replacement for my Eastwood tig 200. It fit my tig welder and it is easy to use.

This is a really nice torch and lead for 200 amp welders and below welding stainless steel and mild steel if your looking to weld aluminum then you need to get a water cooled torch lead. It might be ok if your only using 110 for your electricty but you can only weld about 1/8 thick aluminum using 110.I,m only going to be welding stainless steel with it and it's a perfect fit for my little 200 amp inverter the instalation took all of about five minutes then it was ready to weld. What I really like about this torch lead is that the weld button is built right in to the torch head and everything is sealed up good from one end to the other you won't have to get out your roll of electrical tape to do any taping like i always have to do with the water cooled leads down at were i work. The lead is all sealed with a rubber cover and the only way you will see any wires is if you take it apart it's perfect if you have one of these little tig inverters like what i'm using.If this will work with your welding machine and you need a new lead I don't think you could do any better then this lead at $45.99 thats way fair for what you get plus the extra cups, welding lenses, colits, and stims I think it's a really good deal. Usually when you buy any tig lead you don't get any extra stuff if you were buying a water cooled tig lead you don't even get the torch head with it unless you buy a package deal and then you will still have to install the torch head onto the lead.This little inverter i got came with a lead with a nylon cover and one of those plastic weld buttons that you zip tie on to the torch head and it served it's purpose for the time i used it but this lead is alot better and i'm real happy with it so far, I think it's perfect for any home welder or small bussiness were your not going to be using it day in and day out like i do with the machines down at work it just wouldn't hold up to that kind of use everyday and it's not really made for that it's made for light to medium duty like up to 1/4 inch steel.I have been welding for almost 30 years as a living so i do know good from bad when it comes to tig leads but at the same time I'm uaually dealing with all water cooled torch heads and tig leads so i only use a air cooled lead at home but still after being in the welding trade this long you know if it's junk and in my opinion i think you would be real happy with this welding leadThanks For Reading.

This is a review of the Welding Knight WP17 Air-Cooled Tig Torch Black With 13FT Cable Plug 16M-2 M16*1.5 Connector (WP17 European black handle) (WP17 European Style). We have a couple of old TIG welders in storage and will have to drag them out to see which one will hook up easily to this torch. Because we haven’t welded with it yet we can only comment on the quality of the equipment as we received it. It says it’s the European style, and has the aviation type of connector with two prongs. The gas hookup is standard. This unit has the heavy duty two piece cable assembly that is 12 ½ feet long, minus the torch head. Found a few extra gas lens and the long back cap in the box, along with consumables parts list. This one (A-150) uses 10N series consumables. I like the feel of the torch head and fully expect this unit to perform very well. Nice piece of equipment and a good value for the money.

Good kit at a very budget friendly price for new and hobby welders alike. Solid build quality and great length for using around a small garage. Not as nice of a finish as a real ck, but cheap and gets the job done or can be used as a spare depending on if it’s compatible with your machine. Look at the diagram before buying to ensure it’s the same for your machine.

I’m not sure why I got a European version. My bad, so I need to do some adaptation to runs this. It is a decent flex head WP17 torch with build in thumb switch. My Tig is 6 pin so I’ll need to adapt to the two pin on this cable, but not a big deal. The torch feels solid, the thumb switch has good action, the cable and hose are covered and overall it seems to be high quality. I’ll have to update this when I get it into service

Seems like a nice torch; unfortunately, the plug does not fit my model of Miller welder.

This product is a TIG torch on a long, well shielded hose. It can connect well to a power source and appears to work quite precisely even for TIG welding.This hose is a great entry level product which, when purchased in conjunction with other necessary parts such as the power source, can lead to a very smooth welding experience. Although we are babying this torch for now it is responding very well to all jobs

I included photos of the connectors so you can check that you have the correct connectors. The "European" handle is very comfortable and gives me better grip and control than the thinner ones. This also has a pretty long cable at 13 feet which is good for working on large things or keeping the welder out of splatter distance. It also has rubber armor on the outside so you don't melt it. It's a good value at the current price.