Akfix 710 Stone and Marble Fast Adhesive (1.76 oz.) with Activator (6.76 fl. oz.) [Clear Super Glue Adhesive and Accelerator Spray]

I used the adhesive to repair a broken inch and quarter thick Granite Slab that I was using for a counter top in my laundry room . The slab was 14 inches wide by 8 ft long. It was broken about 10 inches from the end during transport. The adhesive works just like in the video and sets up in less than 30 seconds to a very strong bond. Also, after bonding the two pieces together, I mixed some additional adhesive with small pieces of broken granite that I crushed with a hammer to a fine sand consistency. I used this epoxy mix to fill in the small holes and chips caused by the break. To do this you need to work quickly. Afterward, I buffed the surface smooth. The over all end result was a faint thin line that defines where the break was. One needs to look very closely to see any damage, as it's almost imperceptible. I'm very pleased that I was able to save and use the granite stone for my counter-top, and I'm very pleased with the adhesive product.

I dropped a marble slab and it broke in about 15 pieces. I thought for sure I would have to toss it and have another piece cut. But I found this glue on Amazon, and decided to give it a try. It worked like a charm. There are cautions on the label to use in a well ventilated place, and to make sure you don’t get glue on your skin, but I did this outside, and put a mask on, so it was fine. The product works well. The glue dries quickly (ie in seconds), and provides a very strong bond. I’ve put weight on the pieces I’ve glued and they’ve held in place without concern. Just think of it like super glue for marble, and you’ll get the idea.

Watch the video - stuff is the real deal- bonded my broken piece of marble instantly and with minimal effort

1. Instructions very tiny and difficult to read2. Video very poor with no gloves on user Misleading. Need eye protection too.3. Beware/. Extremely hazardous. Use gloves and eye googles .4. Works - very fast and strong bond. Looks good.

Used for photo on headstone