USB Dongle Expansion Board with Case for Raspberry Pi Zero/Zero 2, Both Front & Back Side Can Be Inserted

Works well. I can easily access the rpi Zero 2W thru the OTG usb ethernet.Rpi Debian:1) edit /boot/firmware/config.txt add the following line.dtoverlay=dwc22) edit /boot/firmware/cmdline.txt adding this at the end of the very long line (separate be 'space' character)modules-load=dwc2,g_ether3) set a fixed IP address to the new usb interface, by creating a file /etc/network/interfaces.d/usb0 likeallow-hotplug usb0iface usb0 inet static address 192.168.7.5 netmask 255.255.255.0 network 192.168.7.0 broadcast 192.168.7.255 gateway 192.168.7.1This sets IP to 192.168.7.5 on the pi side.--Now on a Linux PC, plug the pi into a USB port and boot it.After boot 'ip link' will report a new interface like:4: enp0s20f0u4u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 5e:46:5a:b3:09:c5 brd ff:ff:ff:ff:ff:ffWe can change the interface name to something nicer with:sudo ip link set enp0s20f0u4u3 name mypiThen configure the host interface to be on the sane subnet as the pi-usb:sudo ip addr add 192.168.7.100/24 dev mypiNow - ssh to192.168.7.5 !! works,

USB Raspberry PI zero with pretty blue lights

Item is as described, would like to see an rgb version but thats not what was advertised.Works well out of the box

Works great and easy to assemble. Something that it took me a second to realize after receiving it was that the cardboard wrapping can be peeled off. It was not a clear case when it arrived but that's because I didn't peel off the sticker... otherwise very clutch and turns pizero into USB powered, very helpful for SSH

I bought one of these in the past, i like it, but now i buy one, and has no screws to put it together, and the size i need are so hard to find online. Why no color choices (Red, Green, etc.)I sure could use the screws to put it together.... HINT HINT, I buy many of your other products.