UTG Compensator Mount for RWS Airgun with Minor Barrel Droop

This is a good quality mount made out of aluminum and evenly coated. There are hardly any machining marks except for the underside of the mount. The 12 Picatinny rails are cleanly cut. The mount is pretty high but offers a central groove to enable you to see the sights. If your rear sight is adjusted for windage for more than six clicks, the groove won't be wide enough. When installing low Warne Maxima QD Weaver-type rings, the scope height exactly matches the original RWS mounts which come with the RWS (,i.e. Umarex) variable rifle scopes. Overall height is probably extra high and easily cleared my 50mm objective lens. This rail fits well on the 11mm dovetail rail of the listed RWS Diana rifles and provides a recoil stop pin and a front ridge (,i.e. recoil stop shoulder) which should prevent slippage. The mount is angled to compensate for long range shooting. In my opinion, it is angled too much (I think 17 degrees)for my shooting between 20 to 30 yards. I have not tried it at longer distances but will later. When I mounted the rail, it was minimally canted counter clock-wise (I checked with a scope leveler) for which I compensated with a small rotation of my scope within the rings (about 2 mm). I made about 20 shoots yesterday and neither the mount nor the rings loosened. I tried many different (expensive) quick detachable set-ups before, and all got loose after about 5 shots, this one did not. Good price for the quality and workmanship, I recommend it but would like it to be 1/4" lower.

I am working to find a good mount for an RWS Air King. This is one of the three I have tried so far.I like the design of this mount. It stayed put and is everything a guy could ask for. The reason I am still looking is the scope I have is a little shy of being where I want it. I need an extended mount or rings. That is no fault of the mount and compared to some of the others this mount is less money and more mount.I really like it and wish it came with an inch or two extension to the rear.I can see this going on another rifle as it is a great piece of gear.

Purchased Jan 05 2018 (seller Airgun Depot)UTG Compensator Mount for RWS Airgun with Minor Barrel Droop17.1" Upward Compensation at 30 YdsApplication on RWS Diana Side-levers & Under-levers with the T05 trigger before 2011 , NOT for T06 Trigger after 2011.I needed about 6" of droop compensation at 10 yards for a Norica Dragon GRS Evolution Max and this was the lowest cost (and closest angle) solution I could find. The listing was very clear about application and I knew it would NOT fit the Dragon as-is, but aluminum is pretty easy to machine. Milled out a portion of the rear mount to fit the Dragon dovetail and clear the tube cap (still has 3 mounting screws) and milled off most of the front "stop" that is specific to RWS rifles listed. With my modifications it fits the Dragon perfectly, completely zeros out the barrel droop, and has not moved due to springer recoil. I can't confirm that this fits the RWS rifles listed, but I do give it 5 stars for reasonable cost and rock solid droop compensation.

Works as expected and it fixed my scope-mounting problem. Only complaint is its weight-- that's quite a chunk of steel stuck onto an already very heavy rifle.

glad to find this product but I question how center mounted it truly is

So far this really seems to be the answer to the Barrell droop problem that the RWS MODELs 48,52 and 54 were plagued with. It also so far has also put an end to scope creep. Originally had another great but expensive mount on my gun I think it was a company called squared D that I misplaced when my original Bushnell airgun scope failed so I ordered a HAWKE Airmax 4x12 AO and this mount with the 4 screws per ring mounts. It'll drive Tacks at 40 yds.

This is actually machined very well, fits virtually flawlessly to a dovetail, HOWEVER, the description should emphasize that it is not the proper fit for any of the Diana rifles manufactured in the last 5 years.Case and point: unless you're buying a 5+ year old used Diana, search Amazon for the UTG droop compensator for T06 models. There's no reason to make your face sit 3-4 inches closer to the scope (off the cheek pad) just because this one technically fits the dovetail and compensates droop.

On my Diana 48/52 it pointed down to much I had to shim it up in the front.

perfetto non ha deluso le aspettative !