20Pcs Antique Iron Label Frame Card Holder Cup Pull Handle Drawer Box Case Cabinet Cupboard Carpenter Repair Decoration Hardware

These well made card catalog type pulls really made my project pop. I have read all of the reviews and noted that the primary complaint is with the screw heads stripping. This is easy to avoid. Drill pilot holes with a #49 drill bit which is 0.072" instead of a 1/8" (0.063") bit. Rake the threads over some candle wax and use a #1 philips driver. Don't use a #2 (standard size). When installing measure down from each rows's cross member while the drawers are in place and draw a line across the entire row. Mark the center, then the screws can be set on the line. I just "eyeballed' the left/right center based on the center line reference and the finger pull. See photos.

These looked perfect on my reproduction card catalog project. I used glue instead of the laughable tiny screws. Looks great. I was able to put little handmade labels on the inside of each. If you follow my glue-recommendation, you should make sure the glue has dried before sticking that label in there.Gluing it guarantees that the label is spelled incorrectly and the contents of the drawer will change soon. I am not smart.

These are exactly the right size if you are looking to make the little 2 1/2 wood boxes from the Dollar Tree into an apothecary cabinet. The only 'issue' is the screws are of course way to long for those little boxes; but I assumed that when I bought these - and I fixed that with a pair of snips and glued these to the box and screwed in the little bit of the screw-end I left (I just didn't want the holes to be empty and doing this makes them look perfect). I removed one star because at least one of the label frames is warped too badly to be usable (going to see if hubby can hammer it back into shape).

Very nice! Sturdy material. The screws are very tiny, but I used a small philips bit with my drill gun and attached them quickly and effortlessly. They gave me the apothecary look I was going for on my end tables. I would definitely recommend for small drawers.

I was super excited, because this item had been recommended to me. When I received it, what a disappointment !!! The material arrived all rusty, apparently because of the humidity... i thought it was some protective product but it doesn't fall. I am very upset, and now I will make a claim to Amazon

Perfect size and color, very sturdy and easy to install. Love that they came with the screws. Some of the pulls the hole for the screw wasn't quite punched through all the way but a nail & hammer fixed it really quickly. Perfect for my IKEA Moppe hack.

You really get what you pay for. These pulls are smaller than they appear. I feel that I am a person of average stature. My fingers could barely fit behind the finger catch. I suppose if I was building a piece of furniture for a small girl, a small boy or a person of smaller build, these could be useful. However, I used these in my workshop and after a few weeks I broke my first pull. Not only were they fragile but the finish on the pulls was less than ideal. I had to file the finger catch on each, otherwise I would cut my fingers anytime I opened a drawer.

Ordered 40 for a small parts cabinet that I built. Compared these to many available on Etsy, but these were MUCH cheaper and my guess comparable quality as they are probably all made in China from the same manufacturer. Other complained about the quality of the screws (heads breaking off etc). If you simply pre-drill the holes with a 3/32 drill bit and a bit depth stop, the screws easily screw in by hand with a small Phillips screwdriver. A few of the holes in the pulls were blocked during finishing process, but used the same 3/32 drill bit to easily open them up. These really made my finished cabinet look sharp! Kinda looks like a painted catalog card. Not sure if I will actually place label cards in them, but it’s an option if I decide to.