Peerless PA730 Universal Articulating Wall Mount for 10-inch to 29-inch Displays (Black)

I used this mount to install a 19" Samsung LCD flat screen in my kitchen. Let me tell you, the mount was the easiest part of the installation. First of all, make sure you use a stud finder, because as long as you have this mounted properly in a stud, it should be able to easily hold most smaller LCD televisions.I know in the case of my 19" Samsung, the TV really does not weigh very much and this articulating arm easily holds the weight. The arm is made of fairly heavy duty steel and uses two fairly large and long phillips head screws (also comes with high quality anchors if you don't have access to a stud).Some additional notes... The description is not clear, but the plate that connects to the TV does tilt up and down (adjusts view angle of TV). There are two black end caps that cover a large Allen bolt. You just need a precision screwdriver to pry off the plastic bolt cover and use one of the two Allen keys that are included in box. The bolt appears to be factory torqued too tight to tilt, but if you loosen it a bit, then you should be able to tilt the screen. Overall, the product is finished very nicely in black and uses heavy duty steel and is even made in USA (a nice bonus). One more detail is that it has some plastic pieces that screw into the arm to manage your cables (i.e., the cables route along arm rather than just hanging there).Finally, for those of you considering using this mount and running your electrical and cable through the wall... I highly recommend the Pass & Seymour Legrand recessed cable/outlet box sold at Lowes. It's about forty bucks (expensive), but it has a surge protector built in and is one of the few outlets you'll find custom made for wall hanging TVs. In fact, if you position the P&S outlet box to the right of the Peerless articulating arm, you can basically move the arm to cover up the outlet box so that the TV looks like it's just magically hanging in the air (in other words, the recessed outlet box is completely covered).

I purchased this product to hold a 19" TV/DVD player weighing about 11 lbs. The mount is very sturday and heavy duty. It articulates nicely from collapsed to fully extended and moves around easily, using two individual arms that allow it to angle almost anywhere, including around corners. It comes with allen wrenches to tighten/loosen all teh pivot points so you can adjust the stiffness of motion to your liking. It fit perfectly my 100x100mm mount size on my TV, and even comes with various sleeves and different length screws to fit TVs that have recessed mounting holes. It also comes with two long thick wood screws or drywall/concrete anchors for different mounting situations. The top holes in the mount accomodate the TV sliding into the slots, and the bottom holes then lock in in place. This allows for an easy mount/dismount, which was important for us since we are using it in our camper, and pack away the TV for travel. It comes with zip ties, and small screws with attachments to hold/route your cables so that they will move with the mount.I am rather particular when it comes to quality and sturdiness, but I am not at all displeased with the craftsmanship of this mount, and for $38 it certainly beats the pants of the $90 mount Best Buy wanted for the Sanus mount.If your TV is a smaller size, you will not be unhappy with this mount.

I looked all over, and this is the best value for a screen mount in this size. You need to have rotation and tilt, or else adjustments during installation are very tedious. This mount looks good, feels great to operate, and has all of the required functionality. The adjustment forces are large, but very manageable if you grab the edges of a 22" screen. The kit comes with all accessories you'd need. I am very satisfied.UPDATE: I bought a second one of these, and even upgraded my monitors from 22" to dual 27". Over two years after I purchased the first one, and the mount still works great! (My monitors are ViewSonic VA2702w, which are very light for their size, so this might not work with your 27" monitor.)

This is a great item. I'm a 29 yr. old male with decent handyman abilities and was able to mount this by myself. If you're not so inclined you'll probably need some help, but it's a really easy install and the instructions are easy to follow and very clear.I'm using it with an Insignia 19" LED TV in the kitchen. After a little adjusting of the arm screws it now moves easily. The factory settings are more for security so they're a little too tight. These are easy to adjust and the instructions discuss how to do it.The only reason I'm not giving it 5 stars is I'd like a little better cable management. It has a lot on each part of the arm that you can slip a zip-tie through but if you have more than a couple cables running to the TV then it's a little cumbersome.All in all, this is a great wall mount.

I recently decided to mount a television on the wall in my home office, so I started shopping for a wall mount with a tilt. I looked in the stores first, but the mount was almost the same price as the cheap TV that I planned on installing! My search on Amazon lead me through several, but this one had the best reviews so I chose to give it a try -- and you certainly couldn't argue the low price!Well, I've installed the mount and absolutely love it! It installed effortlessly in about 15 minutes!! Find wall stud, drill holes and screw mount to the wall, then put two screws in TV mounting threads and hang TV on mounting plate. It's just that easy! The arms swing easily, but solid and securely, and this mount has the widest tilt range I could find. If you need a mount that tilts then give this one a try... you won't be disappointed!!

Excellent product which was delivered very quickly by Amazon. Sturdy construction which can be arranged to fit any circumstances. Well worth the extra money compared to lower priced items. We use it to support a 22" TV, so that we have more work space free in the kitchen.