Lithonia Lighting LED Waterproof Light, Contractor Select Vapor Tight LED Strip Light, MVOLT, 3106-4946 Adjustable Lumens, Switchable Color Temperature 3500K/4000K/5000K, 4-Foot, Matte White

I have tried several Lithonia LED lights and they have another winner with this outdoor rated light. It is easy to to open up the housing to wire and setup color temp plus brightness. By opening the hinges the top cover comes off. You will remove the top panel which has all the LEDs mounted to it. With the top cover removed you may see the inner workings of this light fixture. You will wire up Green, White, Black wires plus setup the switches to choose between the 3 color temps and 3 brightness settings. It comes with two brackets to hang it up outdoors.It is really bright and a plus is to be able to adjust the color temp to your liking. Make sure to get Liquidtight fitting and conduit in order to maintain a water proof light. I am currently using it as a portable light which I can move around the garage to add more lighting depending on which area I am working in. The light is completely enclosed and feels well made. It’s the reason I have confidence in moving it around.Thank you for taking the time to read my review of this product. If it has been helpful please hit the [helpful] button below and click on my profile for more reviews from Mr Mittens and myself.My rating system:5=Exceeded Expectations4=Met Expectations3=Below Expectations2=Issue with product/quality1=Not recommendedAs I do with all my reviews, if this product does not perform or remain in working order for a reasonable time I will update this review.

This light was perfect replacement for an old fluorescent fixture in a commercial kitchen vent.

PLASTIC clips??.... On an outdoor-rated item? At least it's durably made. But it's going to fall apart in a couple years.

Bought three for licensed electrician to install. He’s done a lot of work on a remodel and very up to date on lighting. All three were getting power but only one lighted. Moved LED strip from working to non working and two would not light. Bad drivers on two out of three? Wasted his time and my money. Ordered same lights as replacements from HD, hoping they have non defective stock.

I've purchased 3 of these for a walk in freezer in the last year or two. They have all failed due to the -9F temp in the freezer. They would probably fine in any other application but I would not buy another one for a walk in freezer.

The media could not be loaded. Adjustable brightness, and color temperature. Nice sturdy sealed enclosure, with clip mounts so no holes for moisture to enter. The lens can be opened and hung on two of the mounting hooks. The only complaint I think is the bushing uses what looks like standard threads, but metal fitting would not screw in. Got a plastic fitting then it worked. Has an option for a 0-10V dimmer too, but did not use it. Wire hookup includes 3 wire nuts, a quick disconnect, and a pair of wago-like stab-on connectors. Not sure why the hot and neutral have a quick connect and wagos allow extra connections in and out or more options but if that is the case why were they not bagged with the wingnuts? Some of the other wiring for the switch module etc is a bit messy though nothing I have not seen before. Not usually an issue just need to make sure it is tucked away when you close the figure up. Though ziptie or something to clean this up would be nice.

Great overall, looks nice and its easy to install. Color temperature can be adjusted between 3500k and 5000k, so you can get a nice soft light from this fixture as well as cold daylight white, if you're one of those people who are into the morgue look.Quality is good - plastic - but the installation brackets could definitely be better. They're a little flimsy and have a tendency to bend a little. So make sure to handle them gingerly during the installation and you'll be fine. The brackets are for mounting this fixture to the wall or a ceiling.There is no pull chain or switch - its just a standard plug. So you'll need to have it connected to a switch of some sort in order to turn it on and off without having to unplug it every time.Overall, its perfect for the new art studio we put in above the workshop. Its not the most powerful light, but for our needs its just right.

- Made in USAWe have a number of other LL lighting products and this one is working great along with all the others.Good seal, easy to work with, and plenty bright. We're using it in our home wood shop, in the stain room.Don't forget to use the Smile.Amazon.com address - It's an Amazon program where many everyday things you buy will generate a small donation from Amazon to the charity of your choice at no cost to you. Info here: https://smile.amazon.com/gp/chpf/about/ref=smi_se_rspo_laas_aas