Milomdoi Designed for Google Pixel 6 Pro Screen Protector [NOT Glass], 2 Pack HD Flexible TPU Film with 2 Pack Tempered Glass Camera Lens Protector, Support Fingerprint Unlock, No Bubbles, 4 Pack

This screen protector seems pretty durable after a month of use compared to one from another brand that I used. The other one started feeling tacky and a layer of it would start flaking off after about a month, even though it was an "improved" version.Installation on this one wasn't an issue, either. When I first installed it, I did notice a line where the 2 halves of the backing paper met, but either it's gone away or I don't even notice it anymore.My biggest gripe with this and why I'm docking a star is that it's cut a bit short. My fingers catch it when sliding up from the bottom or down from the top even though I have a case that is higher than the face of the phone. So far, it hasn't caused the edges to lift up when it happens, but time will tell.The sides are fine and it wraps around the curve of the screen well enough and doesn't lift at the edges with the case I'm using.

It is only glass on the camera lense. The part for the screen 9f the phone is flimsy... I thought all would be glass. But It seems to be working fine

I was going to get a glass screen protector for my Pixel 6 Pro but I wasn't sure if I would be keeping the device. So I opted for this TPU protector in case I returned the Pixel, since these are easy to remove, unlike glass protectors. The fingerprint reader works great, just as well as with not screen protector. Just make sure you register your fingerprints after you install the protector. Also, it does feel plasticky and not as nice as glass but I can live with it.After about 10 months, the screen protector has a few scratches, and the edges are starting to peel a little. I blame the peeling on the Pixel 6P's curved screen, but perhaps glass would've held up better. This came in a two-pack so the time has come to replace with the spare. For the price, I am very satisfied with this screen protector.

I've been running this protector screen for roughly a year and it does its job. Be aware that since it's not glass, it's more of a "plastic" which means that it's easy to scratch and dirty.There is some "fading" to where it frequently contacts my pocket but as far as I can tell, there has been no deep penetration into it.I didn't bother applying the camera protector to avoid the risk of ruining the camera quality.

So far so good for use with my Google Pixel 6 Pro. I can use all features and functions no problem, including fingerprint reader.Install was ok. The video is aggravating because it plays quickly, and anytime I paused it, the written info was covered up by the playback bar. Written instructions worked out best, but I did accidentally ruin the first one because the peel back slipped. Once I tried again, all went very well. I have been using stuff like this for years, and always get it on the first try perfectly. This one threw me off a little. Just watch video on this page a few times, read directions, have patience, then have at it.LOVE the plug in "guide" and the added no slip backing (like a carpet backing) to help out this process. Plenty of wet wipes, dust wipes, dust pick up tape. Overall, a really good kit.I happened to order this knowing my phone was on the way. Once my phone arrived, I didnt touch it until I had this ready to use. It saved me greatly from having to clean the screen off as it comes comes covered up.Hopefully it does what it is supposed to do and keep my phone screen safe. If I learn anything else, experience anything worth sharing I will be back to update.

Great product really

Pretty easy to put on once you watch the video to see how the tools work (or you can figure it out on your own if you're able to put IKEA furniture together). Does have tiny bubbles but just applied an hour ago, and most of what I do on my phone is not bright white so they aren't noticeable. Will update again in a few weeks with durability.Update:. Bubbles left as advertised. I've dropped this five times sofar from around 4 ft and has landed directly on the front cover 3 times, camera once. No breaks or cracks on the tempers glass protector and no front cracks at all. It is a little sharp on the sides where the glass curves but doesn't cut ( you can just feel it if you run your finger up the sides). So far so good. Can't comment on anything with phone case as I do not use one.**Edit**Dropped the phone onto concrete today while running. No damage to the phone protective screen and no cracks to the actual screen. I've been putting this thing through the ringer and it's holding up well. Sensitivity is still working at medium touch for fingerprint and touching keyboard (so any misspelled words are for having bjg thumbs). Most of my drops are from my hand and I'm tall. So if say can handle a 5 foot drop no problem. The one that I did just today wasn't just a drop. Tossed pretty hard and had that "oh no what do I do?" moment. Was relieved to see nothing shattered or cracked. I have, however, scraped the base of my Pixel and scrapes some paint. Will update again when I have to use the second cover.

Finally, a screen protector that allows fingerprint scanning and feels pretty good. I'd say the overall feel is between Tempered Glass and typical plastic screen protectors, not as good as the former but significantly better than the latter.Installation is a bit tricky but watch the video and you'll have it done properly the first time.

The packaging was brilliant with 2 screen protectors, 2 tempered glass camera protectors, 4 screen wipe sets, non slip mat, and other.. everything you need to install the screen protector yourself which I was worried doing it myself at first. The YouTube video shows clear instructions on how to do so and it's recommended watching that before installing the screen protector. The fingerprint scanner also works like a charm and my phone fits right into my Spigen armor case without affecting the screen or camera film.

Well, it most definitely was a breeze to install. I put off installing for several days as I have had a bad track record with manual application screen protectors in the past. I did not need to worry. The installation was so easy and following the instructions and watching a few videos resulted in a perfectly aligned application free of dust and bubbles. I am very impressed! My fingerprint reader was working normally after the application, but I deleted all my stored prints and re-added them just to be sure and can say with 100% certainty that there is no chage to the operation of the fingerprint reader! Also, dont forget to turn on the "Increase Touch Sensitivity" option in your display settings after applying. Also try to rember to align the top camera notch and press down firmly on the middle of the screen protector's "Corrective Fixation Strip" tostop it from sliding left and right. Trust me, there is no need to use tape at all.I am definitely glad I researched numerous non-glass screen protectors and all the associated user reviews and chose this one. The minor negative I have come across is that the screen protector does capture fingerprint marks way easier than the Pixel's glass screen did, but that;s probably to be expected from a non-glass screen protector.

I just installed this and I was surprised at how easy it was, as I have generally ruined every screen protector I've tried to put on in the past and they've ended up bubbley and very noticeable. I can barely tell my screen has a protector on it with this one. If you're terrible at installing screen protectors then try this one, it's hard to mess up and it aligns itself!

Se ve de material sencillo y siento que no va a proteger mucho la pantalla, la aplicación es medio sencilla pero quedan burbujas que no se quitan, como vienen 2, la primera vez no me sirvio porque quedaron muchas burbujas y la tuve que quitar y usar la otra, quedaron menor burbujas, pero de los bordes se despega y la verdad es muy tedioso estar acomodandolo, le pongo 2 estrellas porque deja burbujas, y yo NO lei que no es vidrio templado, es como plastico

The installation instructions seemed long and hard on paper but really it was quite easy. Take your time cleaning your screen first though (cleaning supplies included).Once the protector is on, I can't even tell it's there. Feels great under the finger and the finger print reader still works perfectly. Very happy overall