Folding Multipurpose Sewing Table - 47.5" W x 28" D Foldable White Hobby and Sewing Machine Table with Adjustable Shelf - Can Also Be Used as Computer Desk

If I could give it ten stars for this price, I would. Be sure to get the legs on the correct sides of the table. One set is shorter than the other for a reason. If you put it together and it ‘falls apart’, you didn’t tighten everything down enough. I’m 60 years old, and I pit this together myself in 27 minutes. The instructions are easy to follow. The table is sturdy and I don’t have issues with the table shaking when I sew. It’s a great table!

Fantastic seeing desk. Great size for my Babylock Maxchines (Accomplish Aclaim and Euphoria) Recently downsized and use one room for office and sewing this makes my area very versatile

Great table. Arrived in excellent condition. Easy to assemble. I saw some reviews that talked about the legs being different heights. They are but if you read the instructions and look at the “L” brackets it’s easy to figure out how to make the table level. Not rocket science. I have a Brother PS500 weight is 20.6 pounds seems to be sturdy enough to handle my machine. The only thing is the shelf doesn’t sit low enough to be flush with my machine. My machine sits about 1/2” above the table but it’s not an issue for me. Only reason I didn’t give it 5 stars is because nothing is perfect but would recommend.

I purchased this sewing table in Sept. 2024. It is now October 2025. This table was great when I first got it & was perfect for my temporary needs. I kept it in a guest room, so I stored it from May-Sept '25, so the room was available for guests. I recently set up the table to sew again. I heard a strange noise & realized it was the table collapsing--all my sewing supplies were sliding to the floor as I was trying to grab my sewing machine before it crashed to the floor. The recessed area was the only thing that stopped it until I was able to catch it. Thank goodness my machine wasn't damaged and I wasn't sitting at the table. It was over $150 & should have lasted, especially since my machine is not a heavy duty machine & it was not used on a regular basis this year. I've submitted a concern to Amazon & have a # to call the company...but it's likely nothing will come of it! You may want to think twice before purchasing!

We will be using the table for my wife's sewing machine in our Travel Trailer. The only negative was that the edge was damaged. I was going to send it back but the wife said we would make it work. It was very easy to assemble. There are NO extra screws or bolts so make sure you use a magnetic tray. Pay close attention when assembling the legs and "L" brackets. My wife didn't and we had to remove the "L" brackets (she was doing the directions). The folding legs can be assembled incorrectly if your not carful. All in all it was worth the money except for the damage.

I needed a table to work on sewing machines. I ordered one of these via amazon warehouse. It was evident that package made at least two prior trips before my purchase. All components and required fasteners were within package (a pleasant surprise). An Allen wrench was provided. Assembly also requires a Philips screw driver. This is a heavy folding table (about 50 pounds). It requires user assembly. Fasteners were good quality. Instructions were simple and mostly graphic in nature. All bolts were captured with threaded inserts. Positions for screws were pre drilled. Leg feet were provided with levelers. Table top is entirely surfaced with laminate. All components fit when assembled without any problems. I could not make it for anything near asking price. No clue how they can provide free shipping given weight and size of package. Buy one before they come to their senses.

The specs on the table load bearing limits had me a little spooked, because I have a beast of an industrial machine that weighs in around 45 pounds, but I rolled the dice. After seeing it, and putting it together, I was confident that it would hold up. And it has. i have maybe a week of banging away on it making dodgers for my sailboat, and it's doing fine. I did have to drive down the screws holding the adjustable part to stabilize it, but then, how often do you mess with adjusting the table height? The bad new is that it is not very solid when the machine is running, and the table has resonance frequency which really makes my machine bounce like crazy when running. This is true for the industrial machine, as well as for my little machine. So, I guess you get what you pay for. It's nice that it tucks away when I don't have a project running. And if I wedge my leg from one of the legs up to the bottom of the table, I can stop it from bouncing all over the place. I suspect the only kind of table that won't have this kind of resonance is something really heavy and solid, and that precludes tucking it into a closet when not in use. So this may be about as good as it gets for buying a table from Amazon. So 3 stars.

Love my sewing table! Upside is that it can fold up when not in use. Adjustable shelf is a plus because I have various sewing machines!

Really useful table for all sorts of purposes. Using as a computer desk, a craft desk, camera cleaning station and many more. I may even put a sewing machine on it at some point :-) read the assembly instructions carefully it is easy put the legs on wrong. It is easy to fix once you realise what you have done. One set of legs is an inch longer than the other. The mounts are at a different height to facilitate the ability to fold the table down. Great table really happy with it

Bought this for my daughter who is learning to sew. Very basic but big enough for starting out. Material is sturdy. Very easy to assemble and very easy to store away; which is why we bought it as we live is a smaller space. Overall we are happy with the purchase and would recommend.

La mesa se ve un buen producto, solo que llegó dañada, espero me la reemplacen por una en buen estado.

So happy with my purchase. Well packaged. Great for a small 1-bedroom apartment. Easy to put together by myself except I ended up with an extremely lopsided table; apparently I didn't see the legs were different lengths, lol. I definitely see many uses for this table when it is not being used for sewing. The instructions suggest checking/tightening the screws every six months so I made a small pouch for the hex key, similar to a seat-belt protector, and attached it to one of the legs. As a widowed senior my only concern with this table will be the weight when it comes time to move or store it.

I bought it for a Sewing machine , It is very sturdy and a good height for me . I’m very pleased I chose this model. I think it is value for money. It came with very good instructions to assemble and all parts etc were numbered and well packed.