1 for 953EV-P2 953EV 953ESTD Chamberlain Garage Door Opener Remote Security+2.0 MyQ 3-Year Warranty

I purchased this to basically disassemble for a DIY project. First though I had to pair with my chamberlain yellow button garage door opener. It paired exactly like the originals and was quick and easy. I then removed the PCB and soldered two wires to the large button switch inside (the two contacts closest to edge of the board for the big button). I ran these wires to a momentary push button switch on my motorcycle handlebars and put this remote in a plastic bag under my seat. Range is excellent and after sealing the connections with hot glue and silicone to keep water out (and melting holes for the wires to pass through the shell with my soldering gun), it works great. Would highly reccomend.There are plenty of replacement remotes being sold on Amazon for chamberlain but they are for most part only for a single color/model of opener. I wasn't sure which I had when ordering so I chose this because it has instructions to work on pretty much any model/year opener. For my yellow button opener, I just pressed the button on the garage door motor once, then clicked the button I wanted to learn one time, and it was paired and working. This is exactly the same procedure as the factory original remotes. Quality looks the same and it did come with a visor clip if needed for your application.

At first, I could not get this to program to the Chamberlain garage door openers. I gave up and when our older one's stopped working, I picked it back up and reread everything and under troubleshooting it suggested to hold in the learn button on the opener and wait until the LED goes out then repeat the entire process. On our older Chamberlains, (+10yrs old) it fixed everything when I did this and programmed on both garage doors the first time. Only issue is I had to reprogram the smart link opener buttons on my Honda CRV. This remote also seems to open the doors from a greater distance than the older remotes that came with the opener. I am glad I didnot spend more on the Chamberlain now that I got this one to work.If there is a downside the instructions were confusing at first. Just 1) Clear the memory of the garage door opener. 2) Set the remote in the programming mode. 3) press the learn button on the opener and program the remote. There is a YouTube video to watch if you need it.

I wanted one garage door remote to work with 3 different openers and I wasn't disappointed. I was able to program each garage door opener to 3 different openers using the programing instructions. All 3 of my openers have a smart button and they are all different colors red, yellow and purple. I programed all 3 remotes to all 3 door openers without a problem and each of the 3 buttons can be programed to operate door 1, 2 or 3.

Programmed easy and works well but the range isn’t as good as the factory remote

Awesome controller that is simple to program. I purchased this remote to consolidate my garage door openers into one. I had no issues programming a Chamberlain and 2 Genie garage motors to this. It works great compared to my original Genie remotes. It seems to communicate with my motors at a further distance and without fail. Prior to these I would often have to push the button a few times or hold it to get my garage doors to open. This has not been the case with these remotes as they just seem to work.

Fairly easy instructions work right away

Ordered this remote from Amazon because it said it's Model Number is 953-EV-P2 and was advertised as compatible with Chamberlain and Sears Garage Door Openers. I had already looked at the model 953-EV-P2 on the Chamberlain website and it was almost 3 times more than the one sold by Amazon.Delivery was quick, however, I could not get it to work by following the instructions included and by also calling Chamberlain Support for help. In the process of trying various ways to program this 3 button remote, it ended up disabling my existing remote AND the Control Panel on the outside of my Garage door! Not good.The photos show both devices side by side. The one from Amazon is the one on the bottom that does NOT have Chamberlain embossed on it, and does not have a sticker on the back on the right side. The one from Home Depot is the one shown at the top of both photos and clearly shows a small clear round button in the middle that is necessary for programming.Today I ordered another one with same model number from Home Depot and just picked it up. You can see in the photos that the one purchased from Amazon (the on bottom of the photo) is missing the button needed on the back in the middle of the one at the top of the photo that is NECESSARY to activate the programming mode, and this is why it wouldn't work.No idea how whoever manufactured this item didn't include this critical button.IT DOESN'T WORK!!

As a previous reviewer noted the button on the back to program the front buttons is missing. That said I could still program the large (number 1) button to a garage door which was my main concern. The other two buttons are not able to be programmed so I could not tie them to the other garage door which is no big deal since we already had a remote for the door my wife uses. The price is right if you only have one door to worry about. If you have several doors that need to be programmed look elsewhere.Glad I took another look at this. The instructions on the product page are different than the ones that cam with the remotes. Following the video and photos of the instructions, Which are not as easy as it sounds all buttons are now programmed. Persistents pays off.