E-Z Dishwasher Bracket by EZBracket

This thing saved my LIFE! We purchased a home with a granite counter top and could not figure out a way to secure the dishwasher. Each time my kids loaded the dishwasher, it would tip and slide in the opening. I tried to secure the tub to the sides of the dishwasher and failed miserably. This product installed fast (less than 10 minutes) and worked just as described. There are plenty of holes to fit any application, and to this day the dishwasher is secure and flush. Would buy this again in a heartbeat!

Give me some #8 flat head screw in 1/4” length and I’ll rate at 4 stars. Provide double sided 3m sticky tape 3” and I’d give it 5 stars. Current screws scrape the top of the dishwasher lid. Home Depot doesn’t have the short screw and i don’t have patients to hacksaw longer ones to work for my needs. Does what it is intended to, just want the product to get to the next level.1/3/18 edit. Made my own short flat head screws using heavy duty pliers.

Had to purchase this because our old countertop was replaced with granite, and now, there is nothing for the dishwasher tab to secure itself to.As the instructions state, if the countertop is already installed, you will need to bend the ends (90 degrees) in order to screw in this bracket to the sides of the cabinet frame. If the bracket is slightly wide for the cabinet frame width, just use a hammer to gently tap the sides of the cabinet frame outwards so it widens the cabinet width.I did not remove the dishwasher when I installed this bracket. Because of that, it was a difficult to maneuver a screw driver to screw in the wood screws to the side cabinet frame.Another thing to consider. If you have a large gap/space between the underside of the granite, and dishwasher tab, you may want to consider an alternative solution. Consider "gluing" a strip of wood to the underside of the granite countertop, than screwing dishwasher tabs to the wood. This way, wooden strip fills in the space/gap. (similar to gluing four of five yard sticks together).This product does work as described and the dishwasher is now secure in place.TIP: Before you have your counter tops replaced, make sure the installers put this bracket in before they lay down the granite countertop. This way, you will not have to worry about bending the ends and screwing into sides. Instead, they screw into the top of the cabinet frame. (you can see the seller's video).

If the counter top over your dishwasher is corian, granite, or similar material that will crumble when you drill into it or try to put a screw into this material, then this is the solution. This bracket has ends you fold down to the dimension / space between your base cabinets that is the space for the dishwasher to occupy. You put screws through the folded down tabs into the cabinets, not touching the counter top above the dishwasher. Then in the tabs above the dishwasher door you put two metal self tapping screws that come with the bracket up into the many holes available in the bracket. This stabilizes your dishwasher so you can pull out of the drawer shelves in which you load your dirty dishes as well as keeping the dishwasher from moving around while it is doing it's work.

Great solution to the problem of securing a dishwasher when the 2 screws normally used can no longer stay in the typical particle wood found in most kitchen counter tops. Just bend the tabs on the ends of this bracket and screw them into the left and right sides of the of the frame/cabinet that surrounds the dishwasher. I used longer, bigger screws than what came with this bracket. Note that of the 6 screws they provide, 2 of them are shorter and are intended to secure the dishwasher itself to the bracket. The other 4 screws are too long.

Evaluate your situation thoroughly particularly if you are installing a new stone counter top of existing cabinets and dishwasher. In my case, at the back of the dishwasher, a 2x4 was nailed to the wall for additional area to anchor two base cabinets on either side of the dishwasher. The screws fastening the cabinets to that 2x4 were inaccessible. As a result I couldn't move the dishwasher back far enough to screw the bracket tabs into the side of the cabinets. Not wanting to take the washer out entirely I considered mounting the bracket without bending the tabs and screwing it to the top of the cabinets. I decided against that as it would necessitate practically removing the counter top should dishwasher repair or replacement was needed. There are other options available such as gluing 'granite grabbers' to the underneath of the counter top or even gluing wood to the underneath of the counter top. In each case, the dishwasher mounting brackets can then be screwed into the grabbers or the wood.

This thing was a life saver when the hardware for our new Maytag dishwasher got lost. We had a granite counter with no holes underneath for brackets. This was so easy to install. Just bent the tabs over at the end, screwed one to a wall and the other to a cabinet. Used silicone to hold it under the granite and it held fast. Worked like a charm with the Pack of 2 Dishwasher Mounting Bracket New OEM Bosch, Thermador, Gaggenau, Kenmore, purchased at the same time. An easy fix for securing a dishwasher under most any counter surface without drilling or nailing.

The bracket is great, met our needs to secure a new dishwasher where the holes did not line up with the previously drilled ones in the granite. However, we did not get any screws with ours - just the bracket in the box. We had to go out and buy our own screws, so this product is not as advertised - be aware that you may have to provide your own screws.

Very easy to use. Did the trick. Made the process of installing dishwasher under quartz countertop very easy and secure.

Simple installation

Got tired of the dishwasher leaning forward every time we had to load dishes, installed this bracket and it did the job well.

This is such an excellent product. I used it to mount my dishwasher with a stone countertop, which would have required drilling into the stone otherwise.

I had previously opted to buy a product, over this one, that used adhesive pads that attach to the underside of the granite. That product failed within a week.

Great product

Used it for the 3 cm granite counter top that does not have a plywood backing. I screwed it to the cabinets from above, it did not have instructions

Finally, my dishwasher isn't tipping forward anymore. This works great with my Samsung dishwasher that otherwise wouldn't stay put with the crappy screws that were drilled into...

It worked and quick delivery

Works well. It was a bit too long to go between my cabinets but I just bent it more. Holds dishwasher very well.