FEETER Double Z-Axis Upgrade Kit with Lead Screw, Suitable for / V2 / 3D Printer

The media could not be loaded.  Happy not to bad to fit make shore you line the gantry up level and use a flexible Z rail joint and your good to go

At £15 less than the official version opted for this one and hoped the brackets would fit the PSU( the Creality slimmer version not the Meanwell) but they didn’t - I previously had the issue of the PSU rubbing against the side of the table as it moved so was looking to fix that too.The kit installed fine but I did spend a long time ensuring the bed was square to the frame using feeler gauges. I also added the pulleys and belt ( just search on Amazon) to keep the 2 drives aligned but this does require everything to be square as the belt tension can and does vary depending on the extruder height and can cause too much friction, hence the time spent getting everything square.As the supplied brackets didn’t fit my PSU and I didn’t like the others on thingiverse I modelled my own and this worked out fine and I guess is a sturdier version of the bracket you get in the official kit

As cheap as this was. Its quality is top notch and well worth the money.It has all the components needed to convert your ender 3 printer to dual z axis.Although i don't think it's in the listing but this does indeed fit the Ender 3 V2 Neo, you will have parts left over that are not needed.

Bought this because the X gantry on my Ender 3 V2 just cannot be aligned without a second Z axis, and this kit was the cheapest at the time of purchase.It's not too difficult to install, and one of the things I like about it is that it came with a proper splitter cable for the Z axis motor *instead* of a replacement cable. So I didn't need to access the main board at all to install this kit.Except for an annoying wheel (that really is part of the printer, not the kit), everything fits perfectly.Both axes are suspiciously well aligned without requiring any fiddling with the motor positioning.The kit does not come with any lubricant, but I've applied WD-40 generously.The instruction sheet that came with this is for the Ender 3 (not V2), and for some reason it instructs you to move the power supply vertically, and the kit actually comes with 3D printed mounts for it. Also lots more screws and T-nuts than needed. And all the tools needed are included in the kit.Moving the power supply isn't necessary at all, at least on the V2.Overall I am quite happy with this. It's a cheap upgrade that makes a huge difference when printing structural objects, where correct geometry matters. Couple this with a bltouch and you can actually hope to print things correctly.

No instructions supplied, but obvious how to assemble. I added a couple of pulleys and a timing belt, to keep the steppers in sync, when powered off. The supplied brackets for relocating the ender 3 power supply, were not used, since they would not do the job.

Only just received and fitted took a bit of disassemble to fit it but went together OK there were a few problems such as the wiring loom that came with it was straight wired where as my ender 3 pro Z axis wiring has the middle 2 wires crossed so had to cross the middle 2 wires on the new wiring loom also the parts for relocation of the power u it didn't fit ,whether that is because I have the slim power unit I don't know , I will update review once I've used it a few times and see if it works OK and gives any noticeable difference with my prints

The kit is easy to install. Makes a world of difference to the print quality. Had to buy a separate screw rod for as the one included is too short for the ender 3 max .

Bought this as an upgrade to improve the stability of my ender 3 v2.The upgrade was easy to install (YouTube has lots of vids for the install should you find the included instructions lacking) and I was particularly impressed with the splice/extension cable for the motors which means you don't need to access your motherboard.Combine this upgrade with silicone spacers for the bed and a CR/BLtouch and your need for recalibration will reduce drastically 😁