Economy 3D Printer Tool Kit - All The 3D Printing Tools & Accessories Needed to Remove, Clean & Finish 3D Prints for Adhesion Print Removal Print Clean-Up and 3D Printer Maintenance

Pros:)This kit has a good variety of tools for working with your printer and cleaning the edges of pieces.)nice and compact, a little too much so, see cons)good quality from what I can tell having it about a week or so and doing several prints in that time.)everything just worksCons:A little too compact. Everything ships in the large pouch, but once you take it out, good luck getting it all back in. This gets a little better once you take the plastic covers off of everything. Realistically I have a couple of the items from the kit that I keep directly next to my printer and the rest does zip back up nicely in the bag it came in, but don't plan on being able to just put it all up in that bag every time you are finished with a project unless you have a slightly larger bag to use. The bag and case for some of the cleaning tools inside of it are a canvas material and should hold up nicely though.

Received the kit today. There are many items and most are alright. However, the needle nosed pliers were bent at the tips and will not close fully. (cheap from China). The small tool pouch to hold some of the tools is a nice idea but the velcro to hold it closed was not placed anywhere near the proper location so you cannot keep the fold over flap attached. The large case is very good and will hold everything and they even sent extra knife blades which was nice. They sent documentation on how to use the print removal tools. Overall it is not a bad kit but the pliers were a real disappointment.

You get a LOT with this tool kit and if you're just starting out with 3D Printing, the majority of these tools are a necessity. There are 3 tools that are kind of my go-to tools - the file (for filing off rough edges), the tweezers (I usually use this while printing to grab some of the wisps), and the hobby knifes.

I'm new at 3D printing, but one thing I learned is you need to be ready to adjust/replace parts. This tool kit has had everything I've needed so far to conduct maintenance and replace parts on my printer. Much better than trying to buy tools one by one as you need them. I would recommend if you are getting a 3D printer buy this tool kit along with basic spare parts for your printer and you won't have any downtime waiting for the right tools or parts to arrive.

This is the first and only bad review I’ve ever given anything in Amazon. This “tool kit” is pure junk, absolutely nothing “pro” about it. The only piece worthwhile was....maybe the nozzle needles and mini file? Definitely not worth the $70 they’re charging, I doubt I’d even pay $20. The calipers barely moved because the metal was scraping together so hard, neither of the little levels were actually level, the pliers were bent open at the tip so far they probably couldn’t have grabbed anything smaller than pencil lead and looked like someone had been grinding on them, hobby knife set was junk, and I have better tweezers and nail clippers (the “filament cutters”) in my bathroom. The big scrapers could be ok maybe. I could go to Harbor Freight and buy better quality tools for cheaper, I even went and bought 3 pairs of pliers that have a smaller point and much better quality for $22 at Menards. I couldn’t get the stuff packed back in the bag and hit refund fast enough.

The amount of tools you get in this kit is definitely worth it. There are 3 tools in this kit that when bought by themselves sell for 10 each, and sometimes come in a pack for 25 or so, but the value of this pack far exceeds what i bought it for. Not everything fits in the bag, but that's not entirely a bad thing. I am most likely going to print a new case that holds everything, but i have been able to find a use for almost everything in the case.

This is a pretty legit kit. Pretty much anything you can want from a cleaning kit honestly. Be careful around the blades as they are extremely sharp and using them on plastic can be dangerous.

Already I have used the exacto blades, file and pliers. I liked that the file didn't leave a grey residue on the white PLA prints I found when using my cheap harvbor freight files. Kudos, good tools for a reasonable price!

For the price, this is very low quality.The spatulas are barely holding together I can see space between the wood in the handle which is a pretty bad sign. The long one is slightly bent sideways. The small one seems to be missing a coat of varnish, it's a different colour from the other one and the varnish is less shiny.The pliers don't have a spring which makes them pretty annoying to use. They even claim this is a good thing for safe storage in the description. Whattt??.The flat file seems a bit cheap and flimsy, no idea how it will hold up.Love the sideway nail clipper, just won't be using it to cut filament. Should have been a copper wire cutter instead.Edit: nail clipper is not straight and thus can't even cut nail, so going direct to the trash.The picture makes it look like your getting two cutting mat, but it's instead just one very tiny one with a green side and a black one.Support removal looks kinda cheap too, but better than the spatulas.The tweezer are great. Long and feel pretty solid.The bag to store them it is you average cheap polyester crap. I expect the zipper to die within the year. It's also a bit small. Hard to get everything back in.The kit is really missing a deburring tool too.Would be a decent start kit for 1/3 the price, maybe half.