Lippert ComponentsTire LINC Tire Pressure and Temperature Monitoring System

Arrived on time, instructions are accurate, setup was simple.Follow upone tire sensor keeps going offline. will replace batteries in all 4 so if manufacturer sent old stock all will be new

Got this for a 37' 5th wheel, tandem axel that we pull about 5,000 miles per year. I watched a youtube on how install and program, plus the program walks you through the process, which is fairly easy even for technology challenged (me). Lippert suggests a 15 amp in line dedicated fuse link to be mounted before the battery cut off, which I picked locally. Mounted the transmitting unit in the pass through storage basement, ran a hot lead directly to battery with a fuse link and frame grounded. That was what took the time as once wired in, took maybe 15 minutes to finish. Put 95# of air in the tires and the monitor was reading 94#, so plenty accurate. Reason we bought is for low pressure warning in event of a leak, as we don't want to tear a $85K trailer up when there is a cost effective solution in the Linc. We can't see the tires and by the time we know we have a failure, it would to late and damage would be done. Previously shot temps with an infared hand held & checked tires with a club at every stop. Neighbor blew a tire on his tandem axel & totalled his rig! It's Lippert, so a quality company supports this product.

Works great. I tow in a wide range of temperatures (35-95 Fahrenheit). This makes it easy to keeps track of pressure and tire temperatures.

We had to install the base unit in the RV since it did not come with our RV. This was something we had to work through since we are not really very sure about 12V wiring, but it worked properly. We do have times that one of the tire units will not sending info, but this is intermittent and seems more common when the unit is parked. We have not called tech support at this point.

I ordered a new HD GMC truck with the capability to monitor tire pressure. With the receiver mounted behind the license plate it was unreliable and the sensors could only go to 102PSI. Needed something I could count on to protect my investment and this thing works great. Seller had a nice price and it shipped fast.

Install was easy, after install everything seemed to be up and running for the first trip with the unit. Everything function fine going to our camp site and after set up out of curiosity I checked the pressures via the app and none of the sensors showed a status just an exclamation point… then I’d check again and one sensor would show back up until they all did with no input or change by me. Finally leaving from our trip four days later the entire system does not show up in the app and says offline. I attempted to restore communication with the control unit/ repeater (that has power and shows the status light) with no luck. This has failed me the first trip and yes it’s going right back. I’ll try the TST tpmsi system next, seems better for the money actually having a dedicated display and not having to rely on a phone.

I bought this because my new Grand Deaigne Imagine trailer came pre wired with the base unit for the Tire Linc system. It was kind of an annoying scam by Lippert and GD because you can’t actually buy a Tire Linc kit with just the parts you need (ie, the tire sensors, install tools, and repeater), but rather you have to buy the entire kit including pieces you already got with the trailer.Install was quick and super simple. Configuring the app was likewise easy.My challenges: I also use my phone for a Bluetooth brake controller, so that app is going when we are driving. I can’t tell yet whether this will give me a message if I have a tire problem that I will see when other apps are running or not. Next time I have the trailer out, I will have to play with pressure settings to see what happens. The simple solution may be to move this app to my iPad. Second, when I did toggle over to the Connect app to check my tire pressures, it was too small to read with a quick glance. The app is pretty, but could benefit greatly from getting rid of the useless static portions of the screen and making the relevant info large enough to be easily legible at a glance. I would also suggest moving the tire linc info to the top of the Connect app screen…if you are having tire problems, you don’t want to be scrolling to the bottom of a screen to find out what’s going on. All in all, with some simple refinements, this could be an awesome system. As is, it is just okay.

Works great so far

Works Great - Easy to Use. My RV came prepped for this unit so install was a breeze. Pretty simple wiring if you were to retrofit it.

Our trailer was pre wired for this so it was just a case of downloading the app and following the instructions

Very easy to install and setup, you can check your tire pressure anytime and it's so simple to use the app.

Set up was pretty easy but you have to mount the booster in the camper which involves installing a 15 amp in line fuse protector and hook it up to the 12 volt battery not to forget to ground the unit. After this unit was set up and configured everything seemed to work fine, until the next day when one of the sensors could not be connected to the app on my phone. After reading about troubleshooting it recommended that the battery be replaced so new battery installed and now there are rotating issues where this picture taken later in the day but this morning it was two different tires showing this exact same problem. Buyer beware, I contacted the manufacturer and have not heard back from them.