UV Resin, 2 PCS Upgrade Ultraviolet Epoxy Resin Non-Toxic Crystal Clear Hard Glue Solar Cure Sunlight Activated Resin for Handmade Jewelry, DIY Craft Decoration, Casting and Coating(200g)

Ok, so I've tried many resin brands before this... Be it oytra..jags and what not... I always end up with bad odour.. tackiness.. and pieces that never cured completely.It was then I decided to switch to Jdiction!! I made pressed flower studs using it and I am amazed by the results. Crystal clear finish... Very little odour.. completely cures to touch.Highly recommend it.

I used it for jewelry making. Doesn't warp or stain yellow. Dried perfectly after 2 minutes of curing. Maybe 3 if too thick. Only two drawbacks. Shrinks a bit and stinks like chemical

Mein erster Versuch mit UV-Harz. Ich bin total zufrieden mit JDiction! Für meine kleinen Projekte von etwa 0,5 cm x 4 cm ist dieses Harz ideal geeignet. Ich verwende eine Nagellampe (48 Watt, 30-60 Sekunden). Funktioniert einwandfrei, auch mit Glitzer und Micapulver. Es entstand kein wahrnehmbarer Geruch. Das Harz bildete beim Rühren minimale Bläschen, die sich aber vor der UV-Bestrahlung entfernen liessen. Glasklar nach dem Härten! Auch das Domen funktioniert bei meinen kleinen Arbeiten. Angaben zum Vergilben kann ich noch nicht machen. Ich werde dieses Harz auf jeden Fall wieder kaufen.

This resin is very nice. It’s reasonably thick so it’s nice for doming but it also pours and flows well into complex silicon molds with not much encouragement. I’ve tinted it with resin pigment and mica powder (too much mica will make the curing time longer but it does eventually cure) and am very happy with the results. It only takes a few minutes under the uv lamp to get a nice clear glossy finish that is very hard and durable, and seems to have very minimal shrinkage. Also fairly inoffensive odour (I do wear a mask anyway) and no smell when cured. Can recommend! (Edit - I’ve now tried a few other resins and this is the only one that cures up completely in a few minutes without any residue or stickiness! Love it and will definitely buy more.

I really like this resin, will definitrly reorder in future. I have made some cute charm in time for X'mas.

Better than Bondic because:Much stronger than bondic.It dries clear. Bondic is like an amber crappy color.This creates a much stronger, harder to break seal.It's cheaperIt comes with WAY MORE resin. Like WAYYYYY moreif you've used bondic you know what a pain their applicators can be. Bondic applicators gets difficult to apply as they start to empty. But the precise tip is needed sometimes)So i even filled up my empty-ish bondic applicators. (I mixed the two because who cares? I sure don't but if there's any issues, I'll come back and update this... actually i probably won't. I have no doubt it'll work fine. They're both uv resin)The tip of this product allows for much more coverage (be cautious of over applying. Apply a little, cure it quickly, then apply another layer, cure it, on so on) Otherwise this stuff will come pouring out.Have your UV light ready (with bondic too! Any uv resin) just have it ready. And make sure you don't accidentally shine your UV light on the applicator as you attempt to cure each layer. (I did this with bondic at least 10 times. I would apply some and aim the uv light, then attempt to apply again before i moved the light, or accidentally just held the light on the exposed tip. It sucks.)I use this for fixing things, not making jewlry.Sometimes if i have to glue something that is difficult to hold until the glue dries (just as an example, an arm on a vinyl figure.) I'll cover the surfaces (that I'm going to bond) with the glue, and then add uv resin around the edges (of course it ends up mixing with the glue but so far that has not caused an issue)This way i can cure the resin and set the item down as the glue cures. (I'm impatient and there's nothing worse than trying to hold two tiny surfaces together that keeps slipping. It's maddening)This method makes works every time so far. It's awesomeThen you can peel or pick at any resin that globbed up from the surfaces if needed without disturbing the glue bond (hopefully. Be careful)I'm very pleasantly surprised with this product. It'sinteresting that bondic used an inferior, weaker bonding resin, with an ugly color, and a crappy applicator... the creator said he had the idea because he's a dentist and uses uv resin for teeth. 🙄 uv resin has been around for years and I'm pretty sure he wasn't the first person to use it to fix somethingTHIS IS NOT A GLUE. YOU CANNOT GLUE WITH THIS.THIS. IS. NOT. A. GLUE... for crying out loud people.And if you need to bridge a gap between the two surfaces, make a quick tiny "string" from one side to the other, cure it fast before the "string" collapses then add another "string". Cure and then you should have a foundation you can use to hold up more resin. Just build up tiny layers. And extend the uv resin further past the two surfaces. The bond works better with more surface to grab.If you use this as a glue, then you deserve what will happen. Simply use this to hold the surfaces that have glue. It's that simpleNo need for pictures. It's a resin.

So easy to use. No mixing involved. Sets in minutes with a UV light (purchased separately). Great results with minimal bubbles.