Rubber Keypad Repair Kit (29 Buttons)

Our security system keypad is 22 years old and the contacts had warn out. The buttonWorx replacement keypad contacts were easy to install and worked as advertised!

I bought this to deal with an old multi mode lighting control switch for a kitchen. The module was extremely worn and required a lot of pressure and messing around to get the most used buttons to activate. It was associated with a larger proprietary control unit that would cost way more than it'd be worth to replace so I figured I'd give this product a shot. It worked perfectly and now the switch functions like a brand new unit for a fraction of the cost and none of the headache trying to track down a warehouse with a unit in stock.

Works great!

The power, volume, and TV device selector buttons wore out on my Panasonic RM-VLZ620 learning remote. In the past I would repair worn out buttons by shaving the conductive layer off an old remote’s rubber keypad, then gluing it on to the keypad’s worn out button on the remote I’m repairing. Although this worked well, after a couple of months the piece I glued to the keypad would fall off and the button would stop working. So I decided to try this because it attaches to the circuit board rather than the keypad. Based on all the positive reviews I was fairly certain this would work well with the larger power and volume buttons that were worn out. However, on the Panasonic RM-VLZ620 there are 8 device selector buttons, and each selector button has 2 tiny little contacts that are about 3mm x 3mm in size, with a tiny center LED between the 2 contacts. The 16 contacts for the 8 device selector buttons are extremely close together. I really didn’t think I’d be able to repair my worn out TV device selector button because the adhesive perimeter around even the smallest button in this kit would overlap onto the adjacent device selector button contacts on the circuit board. My worn-out TV device selector button is on the top left side of the remote, and there’s no button adjacent to it on the left side. The left edge of the circuit board was the only area where I could place the adhesive perimeter without having it cover the tiny center LED. I had to cut one of the pads in this kit in half so the adhesive perimeter wouldn't cover the LED on the right side. Then I had to significantly trim down the adhesive perimeter on the top and bottom so it wouldn’t overlap onto another button’s contact. This worked, but it caused the device selector button immediately under it to stop working. At first I thought my repair somehow overlapped onto the lower button’s contact, but that wasn’t the problem. When I placed the repair on the circuit board for the upper button, it prevented the lower button from making contact with the circuit board. This happened because these two device selector buttons are so close together, and although the lower button was initially working, it’s safe to assume that it was fairly worn out too. Placing this thin repair so close to the lower button prevented it from making contact, so I repaired the lower button in the same way. I also repaired the worn out power and volume up/down buttons with 3 of the larger repair pads, and now the entire remote works perfectly. I understand that the longevity of a repair with this kit is based on applying the repair pads with their full perimeter of adhesive. I made my repair by cutting a pad in half and trimming down the perimeter of adhesive on the remaining 3 sides, so it may not last. However, I made the repair 4 weeks ago and it still works. This is a great product that’s made in the United States.

Works Great! FINALLY a permanent fix to fix button failure! Where has this invention been all my life! Why don’t more people know about this! More and better advertising will make this guy millions of dollars! Really, he needs to go way bigger with this! If he doesn’t have a patent, other companies are going to go big without him. Such a fairly easy fix too. Especially for anyone who cleans their own remote’s insides. As an electrical engineer who has experimented to fix many buttons, I know exactly what this guy is talking about. He knows. Watch his video. We have a remote control that is strange, for an antenna DVR, and the “fast forward” and “play” buttons were worn out from skipping commercials. Fixed both of these buttons with this! Buying this button repair was well worth it, because simply buying a new remote control was not an option, because this remote control is no longer sold anywhere, and now we have many extra buttons to fix other remotes. And now it is just a test to see how long it lasts. But the way it is built gives me great confidence.

I used this on a keypad for a security system that's not made anymore. I only gave this 4 stars simply because of the short time since I installed the pads. However, they keypad is back to its original functionality, and the installation was easy.

I repaired an expensive thermostat which has been giving me problems for years. I cleaned the buttons many times but that was only a temporary and partial fix. These stickers did the trick. The thermostat actually works "better" than new. The thermostat buttons require very little pressure to work. Whoever came up with this idea was a genius.

Fixed my customers problem. Saved him a $1,200 replacement of an automated door

these work great. 100%

Have an alarm system that works fine except for the keypad that wore out from usage. Used this repair kit exactly an instructed, it's working just like new now with the ButtonWorx key pads. Thanks!

Good! As Described.