BTF-LIGHTING RGBCCT 5 Colors in 1 LED 5050SMD RGBWW RGB+Dimmable Tunable Color Temperature 2700K-6500K 16.4ft 60LEDs/m 300LEDs DC12V Multi-Colored Tape Lights IP67 White PCB(No Adapter or Controller)

Great quality for the price , they are easy to use and connect.The light is very bright adjustable and can make a large variety of colors.

Appears to built exceptionally well. Matches description exactly, white temperatures and colors are very bright.The LEDs are so close together that it can be placed quite close to a surface and the reflected light will still appear as an even line, even without an additional diffuser.Only caveat I found is that this strip is not meant to be driven with both color and whites at the same time.If your controller doesn’t understand this you may have problems. My HomeKit controller crashes the Home app when I try and use certain white temps. Same if I use a Zigbee controller with a HomeKit gateway. The color choices it surfaces in Zigbee are all legitimate, but HomeKit plays by its own rules.I don’t see this as a problem with the light strip, but you may want to be aware depending on your application.

I am very very pleased with this light strip. The colors are very accurate to me and quite comparable to Hue light strips. And the brightness is great as well. I am using it with a Hue controller, so it is cool to have this tied into my Hue system. The silicon protective layer is quality, and it was packaged and rolled well

I have use this lights for the under the cabinets. This turned out to super cool. Color are elegant and with the amazon outlet adapter I have converted them into the smart light for different. Color and different scenes. Easy to install only I feel glue adhesive is some places not working or not that strong that it holding the surface otherwise you can easily bends it or cuts it. I liked it how final look of my kitchen coming out after installing this lights

Replaced a set of higher-priced light strips with this set and generally pleased with the results. These were installed in a track with a diffusion cover so output is soft but bright. Connected without issue to a Gledopto controller (just check your wiring) and activated by an Aqara motion sensor in Home Assistant. Unless you need a high IP rating these are a great choice for indoor use.

So, we hooked these up while they were still on the reel they came on to test them out, then got distracted with other things. We didn't realize how hot they got until we realized that the plastic reel they came on had melted and warped pretty spectacularly. They are nice and bright though!

I placed these lights in U-shaped aluminum channels. Installation was straightforward, with the adhesive tape backing on the LED strips and aluminum channels. The adhesive on the strips feels very strong and like it will last a few years.These lights at 12v are not bright, and upon reading the description after purchasing them, they’re not made for task lighting but “decorative” lighting. So, I drive the lights a little harder at 16.5v to get a higher light output. At this voltage, the under-cabinet lighting feels more task oriented. The lights can take a lot more juice, however, up to 18v in my testing, but they likely won’t last very long at that power output without any thermal management. Additionally, they get dangerously hot at 18v with prolonged use. ***As a disclaimer, you would need a thermal management system to keep them cool and safe at any voltage above manufacturer recommendation or risk fire/damage to you or your property.***After pairing them with the Gledpro controller, the BTF lighting LED strips were a great find, and I’m pleased with my purchase.The only con is the push button mechanism to connect the wires. They need to overhaul that design because it’s annoying.

We are general contractors and decided to try these lights out for a client's upper cabinetry lighting. The product is good quality and for the price we were completely satisfied. We will absolutely be using this again.We did hit an issue but I reached out directly to the manufacturer and they resolved my issue from beginning to end within less than a week. Now that is impressive! They communicated quickly and actually made the decision within a day.

Bonjour, les 3 premières leds ne fonctionnent pas ...C’est très embêtant maintenant installé! !

Fonctionne très bien avec les systèmes milight CCT + alimentation 12v