Got this to help support an XFX Speedster Merc 6950xt. Honestly for such a monsterous GPU, these are built pretty solid and have zero sag, I got this as a precautionary measure which I highly doubt was needed with my GPU. Looks good though with the extra RGB lighting. Looks tiny compared to my GPU but it reaches far enough in that it is definitely supporting the GPU should it ever sag. Very easy to install with the ability to piggy back off existing argb peripherals. Good value for money. Great option for those with bottom fans that can't use the cheaper telescopic stick supports.

Picked up the upHere GPU brace support because my new graphics card was starting to sag a bit after installing it into my gaming rig. With GPUs getting bigger and heavier these days, I figured it was better to be safe than sorry — didn’t want it stressing the motherboard or damaging the PCIe slot over time. First impressions were brilliant. It’s properly solid metal construction, no flimsy plastic nonsense. The base is weighted nicely so it doesn’t wobble around once placed inside the case, and it’s adjustable too, which made it dead easy to line up just right under the card. The design is simple but smart — a nice black finish that doesn’t look out of place, especially if you’ve got a black or dark-coloured case. Some GPU braces look dead ugly, but this one just blends in nicely and keeps everything looking clean and professional. Installation took literally a few minutes — adjust the height, place it under the GPU, tighten it down and job done. Since fitting it, the sagging has completely gone. Card sits perfectly horizontal now, and it’s clearly taking a lot of the strain off the motherboard, which gives a lot of peace of mind. Only tiny thing is that if you have a particularly cramped or fancy RGB-heavy setup, you might have to fiddle about a little to get it looking neat, but honestly, it’s not a big deal. For the price, this thing’s a no-brainer. Solid, easy to use and does exactly what it promises. If you’ve got a heavy GPU and you care about protecting your gear, definitely pick one of these up. Highly recommended!

Good item, works well on my Gigabye RX 9070 XT 16Gb OC and you get small sponge pads where the brace touches the GPU so it won't damage it. It's very sturdy and doesn't move at all once installed. It's simple to install (there is no instructions) but it takes up 3 pcie slots at the back of the PC case so make sure you have space for it before you buy. -1 star as the company logo on it appears to be just some random letter d. I've seen review images of different words or icons on it as well so watch out for that. I'm considering removing the lettering on mine completely. It's pretty pricey for what it is at £9.99, but I would consider the price worth it so your motherboard doesn't get damaged by GPU sag

What has become a nessesity with todays large GPUs to avoid GPU sag. Most rely on a post down to the bottom of your case for stability and strength, but this card uses spare slots to create the strength. This is great as my case has fans at the bottom so was my only choice. It fits well, easy to install, is sturdy and has small adjustments on the arm to keep your heavy GPU at the right level and supported. Great value for money and looks good in my case.

I never write reviews, but this is a bargain. £10, well made, easy to fit, looks good and most importantly - does the job. 10/10

Easy to install, clean simple look, good material choice. Some minor adjustments needed, recommend using a spirit level if you have one. Worth the money.

Seems well-made, looks good and is easy to install. I don't think I really needed this as my GPU is one of the smallest current-gen ones on the market and didn't appear to be sagging much, if at all. But, I must say I am pleased that I did buy it as it was cheap enough and adds a nice touch of RGB to the lower part of the case, which was otherwise pretty dark and featureless.

As a support for your GPU, it's good. Sturdy, reasonably attractive, for glass-sided cases. Does that job well. However the LED Strip on mine is already showing signs of failing or glitching out. It occasionally gets stuck, instead of pulsing, goes dim and stutters. Only a restart seems to bring it back to life. All my other case lighting is working as intended. Edit: Uphere have very kindly offered me a full refund for the faulty light. Which is much appreciated. I likely would buy from them again, knowing that aftercare is in place. Still good as protection for your GPU, but the lighting element may not be the best. I'm concerned mine will fail soon.

If you want a clean and discrete support bracket, this is it. No problem supporting an Asus RTX 5070 TI Strix OC.

Does exactly what it’s supposed to — no more GPU sag. The build quality feels solid, and the adjustable length and height make it easy to fit perfectly in my case. The built-in ARGB strip syncs nicely with my motherboard’s lighting for a clean, unified look. The installation was simple, and once in place, it feels rock-steady. Great mix of function and style.

I bought this GPU bracket hoping to properly support my RTX 5070 in my Lian Li Lancool II case. Unfortunately, the left side where it attaches to the case is too bulky, which forces me to mount it one row lower. Doing this makes the adjustable part too short to reach the GPU, so it doesn’t really serve its purpose. I had to drill extra holes in my case to make it fit. Also, I’ve lost access to the three PCI slots below the GPU. On the bright side, it’s colorful and has lights, so it looks nice. Overall, it’s functional if you’re willing to modify your case, but the design could be much better.

Calidad precio, los materiales se sienten de buena calidad y cumple su función, además de que el rgb se puede sincronizar con la iluminación rgb de la tarjeta madre.

Ich habe mir die upHere ARGB-GPU-Halterung geholt, um das Durchhängen der Grafikkarte zu verhindern – und genau dafür ist sie top. Die Halterung macht einen stabilen, wertigen Eindruck, lässt sich gut in der Höhe einstellen und die Montage war bei mir unkompliziert. Optisch ist das ARGB ein schöner Bonus und wertet den Innenraum zusätzlich auf. Wichtig: Ich hatte sie zunächst mit einer KFA2 GeForce RTX 5080 EX Gamer 1-Click OC im Einsatz – hier hat alles perfekt gepasst. Danach musste ich die Karte wegen eines Defekts tauschen und bin auf eine Gigabyte GeForce RTX 5080 Gaming OC gewechselt. In meinem Gehäuse (ENDORFY ARX 700 ARGB) passt die Halterung damit leider nicht mehr, weil die Grafikkarte bei mir zu viel Platz an den Slots einnimmt. Das ist aus meiner Sicht kein „Fehler“ der Halterung, sondern eine Frage von GPU-/Gehäuse-Kombination und Platzverhältnissen. Deshalb trotzdem 5 Sterne – die Halterung erfüllt ihren Zweck sehr gut, man sollte nur vorher kurz prüfen, ob neben der GPU genug Raum vorhanden ist.