GEARGO H11/H8/H9 LED Headlight Bulbs, 6500K Cool White 60W 10000 Lumens Lights Conversion Kit, Plug-N-Play, IP68 Waterproof, 50,000h Lifespan, Pack of 2

This ones too bright and not right, this one's too dim.......ah, this one's just right. That's been my experience with led headlights. All the descriptions sound the same but the lights perform drastically different.First off the Geargo leds are a little tricky to get clocked to the 3oclock / 9oclock orientation which is required for best lighting pattern. Take your time and make small adjustments. Led headlights need an adjustable base, not all have them. Geargo has an adjustable base, they supply a small hex key for this. I left my dust covers off and temporarily taped around the Led leaving the fan exposed. The fan needs to be exposed to dissipate heat. Later on I will drill a hole in the dust covers and reinstall. After installing, the Geargos lit up without issue.I bought both H11 low and 9005 High beam leds. The low beams illuminate the side of road and beyond, almost like having driving/fog lights on. The down road lighting is very good to, Ive tried other brands, one was like having high beams for low beams, another was dim down road. The Geargo are just about right. I can see about 150 meters and dont get flashed by oncoming drivers. Much better than my oem Halogens were. High beams really light up the night. You can see for a good 300 meters. The color temp is a true white, giving clarity without overdoing it like some other leds do by being overly bright. One last kudo, Geargo lights have a canbus decoder built in. A canbus decoder is required for vehicles newer than 2003. Without the decoder you will get error codes. Having them built in saves money from having to buy them separately and keeps the package small so you can tuck all the wires into the headlight housing. Geargo is truly plug and play.Update: Ive bee running Geargo Leds for about a week, I did get a Canbus error after 2 days. The next day the error went away and has not come back. If it stays out I will be a happy customer.Update: Geargo customer service immediately responded to my problem, fixing my canbus error. 5 stars !Update: I bought the Geargo Led headlights May 2021 and used them quite a bit. They have been great, zero issues or failures. They light up immediately and are equally bright.

The media could not be loaded.  I installed these Geargo led’s on my 2020 Ford Fusion SE. I had another brand LED installed previously and the design of the Geargo Fan Housing caught my eye so I decided to try them. Also, at the price point of 20 bucks I figured I didn’t have much to loose.My package arrived on time and the LED’s were well protected inside the box. The first thing I noticed was the look of the LED’s.....Man these bulbs look Sharp...The design is very nice. I really like the fact that the fan is enclosed in the housing.....the led light I used previously had the fan exposed in the back and you had no choice but to push on it during installation.On the 2020 Ford Fusion you have limited space for installation....there is a 3” OD rubber plug that has to be removed on the light housing and that’s what you have to work in (see attached picture). Most LED’s have a square cooling/fan housing in the rear of the LED. On this car it’s literally like putting a square peg in a round hole. The square edge comes into contact with the round plug housing and it takes a fair amount of force to push it into place. In fact I was worried that I damaged the last set during installation.Not the case with the Geargo LED.....The round ball fan housing not only looks great but it made installation a snap. The light never made contact with the light housing.Another thing I noticed was that the other LED I used previously was very difficult to lock into place once the tabs were lined up. I had to push in on the LED and turn (with a good amount of force) at the same time to get them to move. I even had to pull on the wire in the direction I wanted the light to turn.Not the case with the Geargo LED....once the tabs were lined up, the bulb turned and locked into place with little effort.The light quality is great in these LED’s. Beam pattern is great and they project an easy 300’ in front of the car. Check out the video attached to this review.I highly recommend the Geargo LED. Easy Installation and great quality light.

Buena marca

I just installed these headlights yesterday on my 2016 Toyota Camry. I am a woman. The installation took me no more than 10 min. The light was a lot brighter than my original highlights from Toyota. I am extremely happy with these purchases. Hopefully these headlights will last as long as described. So far, I am a very happy customer. Highly recommend this product.

Upon learning that this LED headlight kit is made by Fahren, I immediately bought it without hesitation. The built is all aluminum that is really outstanding, with heat sink underneath cooled by a turbo fan. The led chips can be repositioned once locked. I installed this kit to low beam/high beam/fog lights on my Nissan Rogue and I am very impressed! The Led bulb fits the socket like the original H11 bulb. It has a thick cord linked to the driver box and the package comes with small zip ties and double sided tapes for easy cable management. Took me less than 10 minutes to install each. You will definitely feel secured and comfortable driving at night because the road ahead is very lit! Overall, I highly recommend this Led lighting kit being the most reliable among the competition, not to mention the extra 1-year extended warranty upon product registration (total warranty = 2 years). Do not hesitate to buy these LED kits, you will not be disappointed! Please checkout the attached pics.

Our old headlight were too dim and we could not see at night without turning on high beams. Switching to these lights solved our problems. No more driving with high beams on!