AMOLEN Wood PLA Filament Bundle 3D Printer Filament Wood Sets,Walnut,Cherry,Bamboo,Ebony,3D Printing Filament,PLA Filament 1.75mm,200g*4 Spools

best colors for halloween i have ever used. no clogging or warping. this print came out perfect on my elegoo neptune 3 max using a .6mm nozzle

This turned out so pretty. It worked perfectly and came out mostly smooth with just the standard clean up. It's more like a sample pack,The spools are not big but that should be as expected given the price for 4 spools.So cute,I love it!

I love these packages. I was struggling to find brown filament that didn't cost a fortune. I saw this package set (wood, gold, glitter, and marble) and decided to give it a shot. I have bought from this brand before and had good results, so I was optimistic that I would have the same with these. Having used 3 of the 4, I am happy with this purchase.(All printed on an Ender 3 at 200° nozzle and 60° bed). The marble was amazing and my prints came out perfect. The model texture and adhesion were exactly what I wanted. The same goes for wood.The glitter I am skeptical about. The filament itself is VERY fragile and I broke it twice just trying to remove the filament from the hole that keeps the spool from unwinding. Getting it to feed into the machine was just as tough. The prints themselves came out fine. Adhesion was fine. Texture was fine. But the appearance wasn't what I was expecting. Instead of being shiny and glittery, the filament became almost opaque. It is more of a creamy color with glitter specks in it, as opposed to the clear glitter it began as. It's not ugly, but it's not what I expected. I had been looking at trying glitter filament for a while, and had I bought an entire roll, I would have been disappointed. Since this was a single roll out of a 4-pack, I am not so upset.Overall, my prints are coming out nicely. I will definitely continue to buy from this brand.

I really enjoy the colors. Good print quality with no issues, no smell, etc. I think it’s decent value, but more for the variety factor than the amount of each filament that you get.

The media could not be loaded. So I have heard amazing things about amolen filament and how cool the triple color silks are. I was so excited to get this package. I opened it to find that the volume versus the value wasn't what I wanted. I really was expecting that for the price that the size of the rolls would be a bit bigger. But being a specialty filament, I can understand that the amount you get is going to be less than what you would get versus a solid color like black. Regardless I was also disappointed to find that the roll was not neatly wound, I have concerns that the roll will tangle during use. So far it hasn't. But putting the roll on my standard holder on my creality k1 max the roll moved all over the place and the filament was jumping off the roll and wrapping around the holder on the machine. A quick hair clip to the end of the holder to make the space smaller so it didn't have so much room to move around seems to have fixed that problem. So I'm excited and I love the tri color filament but I would have liked to see better volume for the money.

Pics are the blue/green and red/gold rolls. Looks pretty where it's clean, but where other filaments with my setup I had not problems of this sort, both rolls I've tried so far from this sample pack chewed up the filament at the extruder gearTo be fair...ish... these were in a filament dryer that honestly is bad for using while printing. But again, of the four rolls I've used in that thing, ONLY these two did this at all. Minimal resistance to line tension and retraction. So far the only filaments I've been able to just bend a couple times to break the line or had break while straightening the end to get it into the extruder tubes.Other things to note: This stuff makes STICKY prints. Good for adhesion, but feels like I'm holding a glue stick when holding relatively fresh prints. Makes the results fairly strong too, which is double-edged as getting these supports off has been literally painful. They're, even at effectively minimum density/size, almost as hard as the print itself and very, very clingy to the print body. I could probably learn what settings I could tweak to mitigate this some, but I'd burn most a roll trying.It's worth noting the spool size is ~half a normal 1kg spool. Makes sense given these are 200g rolls, but don't expect the mini-spools to work well in a dryer or any other setups designed for normal rolls. Alone these were jumping and swinging around in my dryer like a jumping bean in hot oil..Bit odd, but my super glue that's worked on all my PLA stuff so far would not stick to this stuff.To sum up: Prints are pretty and hard when / if you get a print done w/o it falling apart, and get supports off w/o breaking it. Shorter color transition distance would be really nice. An actual complete blending of the two colors the entire roll would probably be much nicer, given the effect this has. The Red/Gold has specks of gold in the red, granted, but w/o the just right lighting one can barely notice even the gold section being gold. Red/gold head is ~26m of material and only the crown of the head is notably gold in normal light (pics are with flash and camera's auto color correction).The blue/green was disappointing too. Printed the four TMNT boys and got two blue ones and two green ones... none were actually blue/green.... and the green is actually teal.Pretty, neat, but REALLY not worth the price for its quality.

The media could not be loaded. After reading mixed reviews I decided to try this filament for myself. I’m sure glad I wanted to try it out for myself. I have a small, inexpensive printer to learn on. Check out the pictures. I printed these for my kid’s with my Entina Tina2 basic. They came out beautifully. No stringing, no issues at all.

My friends and I are just getting into D&D and I thought it'd be really nice to have some tangible items... like coins! This is a great set of PLA with the perfect coin colours.I also used a lot of the gold for my Ghost/Ghoul cosplay (boot emblems, buckles, buttons... etc...).Printed on a Kobra Max, 205 nozzle, 80mms.Love this stuff and will get more if needed!

Very nice filament great for Christmas thingsColours better than expected

Muy contento con la calidad de los filamentos y los colores tan vivos que tienen.

Som all annan PLA så är den jätte lätt att skriva ut med men man får köra ungefär 10 grader högre temperatur än vanlig PLA.Ger jättebra resultat på vissa saker men när det kommer till mer kompakta saker så kommer inte färgerna fram lika tydligt