Auxbeam6 Gang LED Touch Switch Panel - Universal Circuit Control System for Cars, Trucks, Boats, UTVs, ATVs - 2-Year Warranty, Green

This product was great for my van build because I could put the switches in an accessible place, but run all the wiring and fuse block to a central location I could easily get to for service. After 2 years of use, the unit had an issue (circuit stuck on), and the manufacturer quickly sent me a replacement part after contacting them on the website. The quality is good and made for a slick instal. My only tiny gripe ... I wish there were more options for the symbols to go on switches.

The product arrived very quickly and packaged very very well. It was relatively simple to install and it seems to work quite well. I’ve only had it installed for a couple of days, but I have no complaints. It would be nice however if the manufacturer provided some double stick tape for the switch panel itself, but that’s just a very minor concern and does not impact the installation at all.

I purchased this item some time ago and only recently installed it. Unfortunately, when I tried to use it, the switch panel wouldn't work. I contacted themto let them know about the issue. They responded promptly and sent me a brand new replacement, which arrived within just five days. I installed the new one and it works perfectly. Very happy with it.I don't usually leave reviews for products I buy, but I felt it was important to do so in this case. Although I'm typically buy-once = cry-once type of guy and don't care about cost, it is hard to ignore that this was significantly less expensive than the Switch Pro. Plus, it's much easier to mount and adding new accessories seems much simpler as you just screw wires into terminals.Whatever the price, things can be defective. It is good to know that even thought the price is pretty low that they stand behind their products. Their customer service was amazing. They responded right away and provided frequent updates. Only issue now is I need to buy more stuff to plug into it.

I've used sPod, Switchpro, and now Auxbeam. For one, the $111 I paid is unbeatable and the quality for the price is good. However, unlike the more expensive competitors you need to find your own ground. Power also comes from a fuse tap and the battery, instead of just the battery. Not the biggest deal in the world, but it creates more wires you have to tuck and hide. I'm also not a fan of using a fuse tap, but I couldn't bring myself to spending $600+ for something similar. Install is easy if you know what you're doing.

The Auxbeam 8 switch is pretty straightforward to connect. I had some logistical issues with mounting the unit under the hood of my JKU Jeep, but otherwise, it went well. That being said, I am very novice in vehicle electrical installation. The unit looks good and feels solid; it is well made. The only thing that may become an issue for someone trying to install this system in their vehicle, is the length of the power supply leads to the battery. They are short, especially if you are going to the opposite side of where your battery is located in the engine bay. Plan accordingly and you may have to buy longer power wires. I only have one set of offroad lights connected for the moment (plan on getting more), but the switch works well and the light instantly come on.

Working very good no problems. Easy install, the relay box needs a bit of space.

I literally just picked this up 20 minutes ago, and absolutely hands down great quality for the value, the whole box is straightforward enough instructions the feel is amazing the value for the price is perfect, 🫡 update it’s been about an hour, I already have my fan hooked up, this is probably the best and easiest kit out there to just get things going on your vehicle and not worry about fires or the hundred jillion wires that will absolutely cost more then this kit and a hundred foot roll and a few eye connectors to get your power and grounds ran, highly recommend this kit can’t wait to get the bigger version and I will do a power house how fast can I get this hooked up and running video so all you youngsters getting into this can get er done! Love this kit!!!

Really like these switch panels. This is my second kit, first was installed on a Tacoma, this one was installed on my 08 Jeep Wrangler. The universal brackets that come with the kit are kinda meh, but if you have any fab skills at all they are very handy to modify and make your install look super clean. I have not had any issues whatsoever in either kit. Ideas for future product improvement would be to have a couple extra fuse slots in the under hood panel for things like a cigarette lighter plug that benefit from having power all the time rather than switch on/off. Another idea would be for a couple extra wires internal to the firewall cable that can run into the cab and have power full time that would also be tied into a coulle extra fuses in the underwood panel. This would benefit things like a 12v fridge freezer that requires power full Time. Excellent bang for your buck value, great fitment, feels quality and works well.

Durante un tiempo busque opciones de botonera de este estilo, contemplaba otras opciones por precios mas bajos, lei muchas opiniones de todos esos prodcutos y en muchos vi recomendaban esta marca, auxbeam.SIN DUDA ES LA MEJOR OPCION!!!Si el precio es un poco elevado en comparacion a otros, pero LA CALIDAD LO VALE, desde que abri la caja me impresiono todo el contenido y no me arrepiento de la compraSin duda lo comprare nuevamente cuando lo necesite para otro vehiculoLos arneses y la instalacion, cable, etc es genial.EXCELENTE PRODUCTO, NO BUSQUE MAS OPCIONES, ESTE ES EL BUENO

Had an issue with this product, but the seller sorted it in a very professional way,I wouldn’t hesitate to recommend this seller,The Auxbeam product is a very useful tool for your van/4x4 build.

The media could not be loaded.  Sus 6 contactos y apagado total con un toque es muy bueno

Excelente producto, ya que cumple su función y claro que da aspecto diferente a tu vehículo, me gustaría que trajera alguna seña que se identifique manualmente para encender las luces y no voltear a ver el panel directamente.

Not working