90 Degree Displayport 1.4 Adapter Cable, BolAAzuL Right Angle Display Port Cable Upward Angled 8K/60Hz, 4K/144Hz 6ft/1.8m Male/Male High Speed for SSUPD Meshlicious/Vertical Mounted GPU

This is perfect for a vertically mounted graphics card, I used this on my pc I built in a tiny case I used so I had to vertically mount my GPU and this works great. If you need this to fit into a tight space this is the perfect cable to purchase.

Using it on a gaming monitor at 1440p resolution and it works great. It seems to be high quality. I don't have any complaints about the cable or the shipping time.

I had a monitor that couldn't accommodate a full length displayport plug and found myself spending tons of money trying out several others before come to this one. The 90 degree market is filled with cheaper options or things that sound like gimmicks but the quality is questionable at best in my experience with a lot of the cables/adapters I tried out.Most of the other cables would cause flickering for my specific application as I needed a 90 degree cable and an extension, but this cable was the only one to keep up. I've had it for around 6 months as of writing this and it has not flickered or failed on me once.

It is what it as advertised to be, and does what it’s supposed to do perfectly fine. I only knock one star off because the angled end could be shorter, still too tall to use in my SFF case, by 2mm.So if you’re not short on space using it in a vertical graphics card mount like my Meshroom S v2, it’s fine

These cables work great when paired with a left angle cable for my Meshlicious build. I wanted to run 2 monitors with my RTX 3080 in that case and had major issues with the right-angle DP extensions I was using. The extensions were too wide to allow me to connect more than one DP port. The "top" DP port on the card is immediately blocked by their stupid mounting mechanism and the "bottom" port is HDMI. That leaves you the two in the middle. This cable and a left angle cable (Model D) are the perfect size for this application.

Bought this 'Model C' cable as a replacement for the Ssupd right-angle DisplayPort cable that comes with the Ssupd Meshroom S case.On the Meshroom S, when configured for the longest GPU, the dimension between the GPU and the end of the case is 23mm. The rubber feet on the case adds another 1mm to the floor, resulting in a total dimension of 24mm.This cable's right-angle connector is 25-26mm high. In the Meshroom S, it can end up sticking too far out the bottom and pressing on the floor.This can be accommodated by either:- mount the GPU on a higher setting, further from the edge of the case, if your GPU is shorter than the maximum of 344mm.- add feet to the bottom of the case to provide more room. It needs very little.

Unfortunately, SSUPD didn't included right angle display cable. This work for my ITX build and running 2K monitor at 144hz with no issue. Highly recommend if you have ssupd meshlicious or meshroom s case.Con: If your using multiple monitor with display ports. You may want to find another cable or adaptor.

Great price

I had never used the display port because the cable bend would not clear the wall and bracket. This 90 bend is perfect to use the display port to my dock station. Good cable and the 90 makes it work. Just check if you want to go right or left.

Angled socket must if you PC is close to a wall (or case etc.) as the force exerted by the thick Displayport cable being pressed against it will deform and damage the GPU's DP socket as it did mine, necessitating replacement of the GPU!

Très bon cable coudé pour réduire l'encombrement des grosses prises displayport

Se tranta de un simple adaptador en L para cables Displayport. Lo he instalado en un monitor Asus que tengo que por su colocación está bastante pegado a la pared, por lo que el cable normal me chocaba un poco. Con el adaptador en L queda perfecto y mejor colocado.En cuanto a la imagen, debo decir que no he notado nada de pérdida de calidad ni parpadeos de ningún tipo, por lo que funciona perfectamente.

Todo correcto