Monorim Genuine V4 Suspension Kit For Xiaomi M365 1S Essential Pro 2 Mi3 Pro 4 Electric Scooter (Black)

Kit came fast and had everything I needed other than a rubber mallet so all good. I bought this for my aovo pro and fits perfectly. Done about 20 miles on it so far and no issues. Ride is alot smoother. Just waiting for the rear suspension to come and should be like riding a cloud

Very good seller and quick delivery. Highly recommended!

The 2 things I dislike about it is the fact when you go over a big bump the suspension makes a crack sound but nothing breaks and the other thing is when you go off-roading the Mudguard mound tilts causing it to ru b again the front wheel but other that that the quality of this suspension is amazing it fits in really well and works on the aovo pro a scooter the different types of springs makes the ride more comfortable over bumps ⭐️⭐️⭐️⭐️⭐️

Overall this is a great product but let down by terrible instructions. QR links to a pretty useless video. These were fitted to an AovoPro scooter (M365 Pro variant).If you are looking to fit to the same scooter and have followed YouTube videos, please be advised that the AovoPro is different ‘under the hood’. The bearings are like a sealed unit, so if intending to use the original bearings as advised in the video, take the bottom bearing cup (silver washer with flange) off your original forks and replace the one on the V2’s. Then place the AovoPro bottom bearings complete with compression washer on to the forks. Then insert forks into the frame and add top set of bearings with compression washer. The original top washer with 2 tabs will be a tight fit. It seems the AovoPro forks has a wider groove on them. As the forks are softer metal than the washer, I slightly filed the groove to allow the washer to slide on easier. Place the plastic top washer on after this and then the top of the forks. Assemble the top of the forks with the long bolt and spacers. Push everything up well together and then tighten the top and bottom Allen bolts of the forks. Then place the steering column back on. NOTE..the original stem bolt is too long for the forks. If you use it, it will tighten without tightening the forks. Use the second black screw from the forks kit in its place (other is for the front fender). Place a piece of card about 2mm thick between the top of the forks and the steering column and tighten the centre bolt enough that you can tug the card out. Then tighten more until the steering is loose enough to turn and tight enough to be secure with no ‘play’ in the column. Tighten the 2 6mm Allen bolts on the steering column and you should be good to go. Use the other long black bolt in the kit to fit the fender, not the one from your scooter which will be too long. Look at the Monorim FS fender support for a complete look (will be stock on the V3 model I think).

The bottom bearing on the Xiaomi 4 Pro is a sealed unit and cannot be removed. Once the suspension is fitted, there is too much play, and tightening will not help.

Monorim suspension were easy to fit 20 mins from start to finish used the blue spring as yellow one was too soft, tighten up all bolts very secure. Quality is very good fit was great an easy install

Positives - Difference is night and day compared to not having the suspension. Around 80% of the vibrations gone from my daily commute. Would highly recommend for anyone who uses their scooter daily!Negatives - Does weigh more so lost around 1-2 kmph on top speed, Tutorials on YouTube can be messy so recommend watching many times to be safe.Included spanner is not good enough to get the front wheel off. Use a High Strength Locking Grip Wrench and hit it with a hammer to get the Nut loose.Included stickers were red, the essential and newer xiaomi scooters use yellow reflective stickers, so be careful removing them.

The media could not be loaded. I suggest saving your money. Instructions unclear how to build this together, cheap parts such as screws and bolts that round off almost instantly. Fender spacer is a piece of sticky foam which does not work at all. (Had to replace fender completely after this) As shown in the video, this isn’t secure at all and has constant rattling when not riding. Too many issues one after another (Including the fender adapter sold separately)This is the second Suspension I have bought, and the third fender adapter as they are very awfully designed and cheaply made. I will be reverting back to original without a suspension.

Super geniales Teil! E Scooter fahren aber mit Komfort 😉Der Einbau war einfach und ging schnell.Hat meine Erwartungen übertroffen

Es macht einen robusten Eindruck aber bei mir hat der Einbau scheinbar nicht so geklappt. Oder etwas stimmt mit der Federung nicht. Es war nicht besser wie vorher, die Feder schlug aus, ein gerattere und geklappere. Ok, Bordsteine habe ich damit nicht mehr gespürt aber dafür hatte ich ständig das Problem, das die Feder ausschlieg. Hab es zurück geschickt und muss leider ohne Feder fahren... Hatte die Vollfeder zum Einstellen

Bien et confortable

Love It!

Muy buena a compra los materiales se ven de buena calidad viene con dos tipos de muelles dependiendo del peso de cada uno montaje sencilloYo he dejado rodamientos y juntas originales las otras me las reservoLas ruedas las tengo macisa pero para la próxima taca las montaré de 10 pulgadasEn general muy contento