Spigen EZ Fit [2 Pack] Screen Protector for iPhone 12 Pro Max

A Spigen product, as with most of the others, a great product, You get what you pay for, buy cheap pay twice when it comes to screen protectors. Spigen are a quality manufacturer, the protectors are made to fit the exact dimensions of the screens, with allowances made for where speakers or microphones are placed when needed. A great screen protector, that feels almost as good as using the screen itself, which is saying something! coverage is great, it feels durable, and looks to offer great protection for my screen. I have been using Spigen screen protectors since getting an iPhone 7 Pro Max way back when,

Previous had this screen protector on my phone needed to replace it after 3 year due to a crack after accidentally coming into contact with something (probably keys)! First if all the old one was very easy to remove, just peeled off intact even though it was shattered. Had totally done the job of protecting my screen. The new one was so simple to put on, the case makes it so easy. Easy to follow instructions and no air bubbles! Might cost a bit more than some others but definitely worth it. Wouldn’t buy any other now.

The pack contains two screens that have their own bracket to make sure the fit is aligned and perfect. I’ll be honest and say I ruined the first one even though I followed the instructions. I’ll explain where I went wrong. There is a sticker to remove rogue pieces of dust and on the first one I used the sticker a bit too much which must have left left sticky patches that then gave me these two bubbles I couldn’t squeeze out due to err sticker residue. On the second one I skipped this sticker stage bit, I just used the screen wipe (also in the pack) to remove the rogue dust and then placed the screen straight on, as you can see the second one went on perfectly. Very pleased with it!. I previously had the Belkin screen protector that Apple supply (invisiglass) but the tray didn’t give me a very good alignment even though I followed their instructions meticulously, a millimetre at the bottom of the screen wasn’t covered and there was overlap onto the “notch”. The Belkin one was designed to go right to the edge of the lit screen(not into the black of that makes sense), but you’ll see from this one in the picture ☝️ there is a nice minor overlap into the black border . I think if I had put the Belkin one on manually(not with the provided tray) I could have got it more correctly in place. However I’d like to say that I think there would have been what’s referred to as screen bleed into the edge of the protector from certain angles. With how this Spigen one is designed with the overlap there is no screen Bleed. One thing I was concerned about and it’s such a 1st world problem was that the shiny new edge of the iPhone would be scratched by the screen alignment bracket but this was not an issue! If you learn from my mistake and do what I did on the second attempt you’ll have a spare spigen glass for if you ever break the first. Lastly I’d like to say about the value here as my Belkin one was £29 and because of how I ruined it, it was basically wasted money, but here for almost half the price your getting two!(i’m not on commission) Hope this helps 👍

This is THE easiest installation I have ever done. I’m used to fitting glass screen savers. I usually have a plastic tool. But this takes it to another level. Inside the large plastic fitting tool there are three layers factory fitted. So you can’t go wrong. You peel off the first protective layer, to reveal the side which is going onto the phones screen. You place the whole thing over your phone. Then there’s a sticker in the middle which you press and swipe. You can watch the glass screen protector do that magic cling thing. Done. Lift the tool, taking the second protective layer with it. That’s the protective layover which covers the top surface your fingers touch. If there are any bubbles they give you a tool with which to remove them. It wasn’t necessary. It fit perfectly first off. Two things I would add is 1) always turn off your phone first to avoid static attracting dust particles to your installation. And 2) proper preparation. Use the alcohol wipe they supply. Any phone screen protector application is only as good as your preparation. As calm and dust free environment as you can. Switch off, and prepare - and you will have success.

Easy to use applicator. Comes with a nice bubble removal tool that is so much better than what it’s other quality competitors offer. Only downsides I have with it are that the protector doesn’t cover the notch (with a cut out for the speaker) and it doesn’t have a black bezel around the glass. My old screen protector had these two features, but didn’t come with an applicator or a good bubble removal tool. Overall, a great product with a few minor cosmetic complaints. Great value for money

Very good product. Easy to fit and align as it comes with a plastic mount you literally place on the screen to apply the protector. Strands of fluff can land on the screen and spoil the effect while applying but that is the case with all protectors. First attempt all was going ok but annoyingly a bit of dust got in the corner while fitting. I lived with it for a few days and to be honest didn't really need to replace it, just me wanting perfection! I installed the 2nd protector without any dust particles and it looks great. The protector I removed prior to throwing it away I scraped and scratched it with a sharp knife and it didn't mark, so should easily stand up to every day knocks and scrapes. There is a slight gap around it which personally I like because when you use a case it doesn't lift it off the screen. Bought a second pack as a spare.

This is an excellent glass screen protector! I have purchased three of these over the years. I bought this exact same one for my 12 Pro Max when that phone (which is still my daily!) was released. I went through both of them. So I’d bought these again in November 2023. I’ve just broken the second one so I’m going to order it again! My point? It has saved my screen 4 times in 2 years! The other excellent point is the “EZ fit” element. It comes with a plastic cradle that hold the phone in place and allows for perfect alignment. Very clever. Foolproof. Although an awful waste of plastic. That’s the only criticism. It’s not especially thick glass, it’s very slim. But this suits me and the aesthetic that I prefer. Also these are way cheaper here than my previous purchases from the official Spigen store on ebay. Win win! Highly recommended!

This is easily the best screen protector I’ve ever bought for any phone. I was a little sceptical having seen other reviews stating it didn’t fit easily but I went for it anyway because I’ve always struggled with air bubbles and getting it on straight. The application system is really simple and aligned it with the phone absolutely perfectly so there are no issues with using a case as well. After following the application process there were a couple of small air bubbles which, using the included plastic tool (instead of the cardboard ones you sometimes get which are awful), were removed within seconds for a literally perfect fit with no raised edges, no bubbles and no wonky lines. If I need to replace the screen protector for any reason in future I’ll be getting another one of these - assuming I haven’t still got the spare left as it’s a two pack! Great product, highly recommend.

جودة ممتازة وحماية قوية

Super mooi product. iPhone lijkt als nieuw

For the screen protector, as it is glass, it can be reflective. I wish they would come in matte finish. Installation is super easy with the provided Ez fit instrument, almost idiot proof. Comes in pack of 2. Very good value for money!

Spigen is the best

Titel: Hervorragender Displayschutz für dein Smartphone Pro: 1. Zuverlässiger Schutz: Dieses Displayschutzglas bietet einen hervorragenden Schutz für das Display deines Smartphones. Es ist widerstandsfähig gegen Kratzer, Stöße und Stürze, was bedeutet, dass dein Bildschirm vor Beschädigungen geschützt ist und länger wie neu aussieht. 2. Klarheit und Sichtbarkeit: Das Displayschutzglas beeinträchtigt nicht die Klarheit und Sichtbarkeit deines Smartphone-Bildschirms. Es ist transparent und ermöglicht eine unverfälschte Darstellung von Farben, Kontrasten und Details. Du kannst dein Gerät wie gewohnt nutzen, ohne Kompromisse bei der Bildqualität eingehen zu müssen. 3. Einfache Installation: Die Installation dieses Displayschutzglases ist einfach und unkompliziert. Es wird mit einem Reinigungstuch, Klebestreifen und Anweisungen geliefert, die es dir ermöglichen, es schnell und präzise auf deinem Smartphone anzubringen. Es ist blasenfrei und passt perfekt auf den Bildschirm. 4. Berührungsempfindlichkeit: Das Displayschutzglas beeinträchtigt nicht die Berührungsempfindlichkeit deines Smartphone-Bildschirms. Du kannst weiterhin problemlos durch Menüs navigieren, Spiele spielen und Nachrichten tippen, ohne Verzögerungen oder Einschränkungen zu erleben. Contra: 1. Fingerspuren: Wie bei den meisten Displayschutzgläsern können sich Fingerspuren und Schmierflecken auf der Oberfläche abzeichnen. Es erfordert regelmäßiges Reinigen, um das Display sauber zu halten und die optimale Sichtbarkeit zu gewährleisten. Fazit: Dieses Displayschutzglas ist eine hervorragende Investition, um das Display deines Smartphones zu schützen. Es bietet zuverlässigen Schutz vor Kratzern und Stößen, während es gleichzeitig die Klarheit, Sichtbarkeit und Berührungsempfindlichkeit des Bildschirms beibehält. Die einfache Installation macht es für jeden geeignet, und obwohl Fingerspuren ein kleines Ärgernis sein können, überwiegen die Vorteile dieses Displayschutzglases bei weitem. Schütze dein Smartphone mit diesem hochwertigen Produkt und genieße eine langanhaltende, klare Bildschirmdarstellung.