Selkie Foam Cannon Gun Kit, Foam Cannon Blaster with 1/4 Inch Quick Connector with 5pcs Pressure Washer Nozzle Tip,M22-14 mm and 3/8" Quick Inlet Connector, Jet Wash Gun 4350 PSI

The foam cannon works great and foams up really nice with chemical guys soap. The foam cannon works vertically and horizontal which is nice when needed. The nozzles I use is only the 40 degree and it is a 2.5 orifice which is perfect to rinse my trucks with. The others do not have orifice size listed on them but I don't use them. I do have an issue with the 1/4" fitting on the end of the gun not working properly, it was sticking while removing the tips and foam cannon. Not sure if they could warranty just the fitting. All in all, this foam cannon and gun works great and makes washing the truck more enjoyable. Also I am just using a ryobi 1800 pressure washer and I did change the orifice in the foam cannon to a 1.1 orifice. The quick disconnect end on the gun is a 1/4" quick disconnect by m14x1.5 thread, not a 1/4" quick disconnect by 1/4" npt.

It works very well gets the job done gives my car a nice lather. I am very happy with this product.

Trabaja muy bien viene con los conectores para diferente tío de manguera trabaja muy bien.Liviana para usarla

After having to reorder as I never received the the first order, was notified product was damaged during shipping. I received the product used it as a foam cannon and product worked as expected. The main reason i purchased this unit as I will replace the the 1/4" quick disconnect with a 3/8" disconnect at the nozzle and run this between two pressure washer hoses this will allow me to use a 3/8" jetter head I have at the end of the hose for jetting drain pipes and be able to control the on and off of the water to the jetter head. I used this as a hand held pressure washer gun and it has a lot of kick to it, the trigger is very stiff but I am using a 3800 psi washer on a gun rated for 4000 psi this is to be expected as I am at the max pressure rating. I put Teflon tape on the fittings when putting fittings on, I don't believe this was necessary for leaking as the fittings have an O-ring on them,I did this as I am going to being taking the nozzle fitting on and off, the gun and or the fittings did not leak at all. I will probably place a swivel at the gun between the gun and the hose as it will make it easier to use when rinsing foam off of vehicle. Overall I am very happy with this product at the price I paid. I will use the original pressure washer gun with the longer barrel when doing pressure washing projects around the house as it is more comfortable and is easier to control. I purchased this specifically for the once in the blue moon pipe jetting on gutter drains around the house, and for washing the vehicles with the foam cannon. I would most definitely recommend this product for a great accessory to those with a pressure washer.

Foams great and easy to use. I bought a gallon of stuff from oreilly that foamed great. I like it so far.

Currently own an electric 2000 PSI pressure washer with a 5 in 1 rotating head - it works well and I rarely use the individual tips.I noticed this model and, at the time displayed a 5 in 1 rotating head as well. I put the unit together, and attached the 5 in 1 rotating head to rinse the car off before using the foam cannon. It broke instantly and water started pouring all over the place. The foam cannon worked well, but don't buy it for the rotating head.

Used to enjoy washing my cars, but as I've gotten a little older bucket washing got more tedious so I bought a cheap Portland power washer from harbor freight to say the accessories sucked is under an statement. After watching IMJOSHV YouTube channel I decided to do some upgrades and Oh boy! I can say this has made titanic difference. I got my mojo back! it's knocked at least an hour off cleaning. I love it.

Excelente producto!

Funciona muy bien

Bought this particular product because the gun portion is the same as the one i had already purchased from another seller. The gun portion does not disappoint. It's solid, has nice "rubberized" sections where you grip (the black parts) and has an overall quality feel. Far more of a quality feel than you would expect for this bargain price. It's a little heavy on the trigger pull, but smooth in operation and acceptable. certainly good enough for a 'home user". Even more so considering the low purchase price.Before I comment on the "foam cannon" portion, I need to point out that I was not using a "foaming" soap. I was using a generic "Simonize" car wash soap. There was no measuring either, I just mostly filled the cannon bottle with water and then poured in a good amount of the car wash soap.Regardless, the first try with the foam cannon resulted in a bit of foam, but with a slightly "milky" consistency. Clung well enough to the car that I was able to go around the entire vehicle without it running off. Slumped a bit here and there, but nothing that was unacceptable. Certainly had time to go around the vehicle with a microfiber wash cloth after foaming to further agitate the dirt.I switched out the stock orifice for a 1.1mm one and gave it another try. The foaming action got a fair bit better, but still a bit milky in consistency. The change was significant enough that you could tell the difference in foaming action.It drained the entire cannon bottle in order to go around a Chrysler minivan once, so don't waste any time when spraying. It was full coverage from the one bottle, but you need to move with a purpose or risk draining it of soap solution before you finish.The dial was turned all the way to minimum for all testing and turning it up would result in a milky watery solution. Possibly a result of the generic soap I was using and the gun working hard to foam it.Construction of the cannon is decent. All brass and the plastics have a good solid feel to them. Spray pattern is adjustable, but seemed to work best on the almost widest fan setting. Nothing jams in the quick connect, the spray pattern adjusts smoothly and nothing leaks.Included spray tips means you can go from foam cannon to "shorty/stubby" spray gun with a simple click of the quick connect fittings.Considering the fact i wasn't using one of the "foaming" soaps, the cannon's performance was perfectly acceptable. I have no doubt it would work even better with a better/foaming specific soap. As it is, you can do a decent job with a generic car soap and save a few pennies that way if you wish.In summary: RECOMMENDED!

Works good, and as it should. Good value

Se ve muy bien,y trabaja excelente

Muy buena pistola para lavar el auto, trae todo lo que aparece en las imágenes, muy prácticas las cuatro boquillas para los diferentes chorros de agua y el lanzador de espuma muy bueno también. Lo uso en una hidrolavadora ADIR 411 y solo tuve que adquirir un Nipple de unión para poder conectarlo a la manguera de mi hidro. Por el precio se los recomiendo.