WINSOME Timmy Accent Table, NO SIZE, Black

The pieces came labeled with stickers to match in the instructions which was very helpful! The design is sleek. There were some scratches and little chips but nothing major or in very visible areas. I just colored them in with a black permanent marker. I tried peeling the sticker off the back board but it peeled the paint off. I colored that in, too, and flipped it around. No one will see it! So, it took 2. 5 hours to put this together by myself. I studied the directions before starting because I wanted to make sure I followed the steps in a proper, logical order. (The way the directions are illustrated, everything in that step seems to be happening at once.) I used all the hardware provided (see my other Winsome post on another accent table...I ended up with 4 extra pieces and shouldn't have). The shelves slide out nicely and it's enough length and depth for putting in notebooks and folders. One drawback is, as the product is packed so densely, it's very heavy. To accommodate this, I opened the package downstairs and took it upstairs in pieces. Anyone lacking in upper body strength should take note. Otherwise, it's beautiful, modern, and I might get another one!

I ordered this to put UNDERNEATH an antique beside table. It's very sturdy. Top and drawer fronts are real wood. Drawer bottoms are plastic. VERY easy to assemble. I'm very happy with this purchase. I would order more of this brand for sure.

This nightstand is of fairly decent quality and aesthetics for its price point. Assembly was not the most straightforward thing as it took some figuring out along the way. My main gripe about it was the poor drawer-sliding performance. The drawers did not slide smoothly by any means. They also would get caught and only pull halfway out. I figured out this was due to the screws on the drawer slide hardware being angeled causing them to rub up against the slides and hinder its ability to do so. I ended up purchasing and installing different drawer slides. The ones I purchased were the Everbilt 12 in. Self-Closing Bottom Mount Drawer Slide from Home Depot. It was $16 total. I was able to reuse most of the pre-drilled screw holes, but I had to drill a few new holes due to the original holes being too angeled, or the new drawer slide having different hole locations. After installing these new slides, the drawers worked perfectly. Furthermore, do not over-tighten the cam locks. It will damage the wood. A 90-degree turn is sufficient. A few of the cam locks broke which required me to contact their support and get replacements. That process was simple and the replacements arrived quickly. I also asked for the measurements of the cam locks so that I could purchase high-quality ones on my own. The large cam locks (part O) are 12x15mm and the small cam locks (part P) are 10x12mm.

The media could not be loaded.  I purchased two of these for my bedroom, the only thing I like about the item is the look. When taking everything out of the box several of the items didn't have the alphabetic stickers to follow along with the assembly instructions. Not the end of the world but definitely didn't make it easy. One of the items had about a 5 inch gash in the material, went through the steps to get a new part but in order to do that I'd have to return the whole item? Seems like a waste of time and energy on everyone's part as opposed to just sending the replacement part. They also sent two of the exact same part, it's supposed to have opposite rails in order for the drawer to slide in and out but one of the packages had both of the side pieces in the exact same direction, making it impossible to assemble one of them. Holy. Crap. The amount of Styrofoam that will be floating around your room when taking everything out of the box. Maybe it was just how they handled my packages but there was Styrofoam attached in every single nook and cranny on the parts, stuck inside every crevice. Took me an extra 20 minutes just cleaning the parts before assembling. And then an additional 30 minutes after I was done getting all of the Styrofoam cleaned up. Again, not the end of the world but definitely not something I wanted to be spending my time doing. Maybe I'm being too picky, maybe my standards are a little too high, but the overall experience just wasn't pleasant. At least the end result looks good. For the one I was able to build.

This product is well made. Very sturdy and a good price. The only negative is that the drawer knobs are kind of cheap looking. I might buy some different ones.

Way overpriced for what it is... particle board and not very good particle board. It should be half the current price. It does have a nice finish and directions are actually quite good for something made in China. It looks like the picture and has a nice sturdy feel to it. Since it is particle board, it is heavy and needs sliders on the bottom to move it around. It is packed well. And amazon, as always, is wonderful to deal with. It has nice gliders on the drawers and good looking drawer pulls. This is the good news.The bad news is everything else: since it comes in dozens of pieces with dozens of screws, etc., plan on a full day to build it, including gathering tools, etc. Then plan on additional time to call amazon to let them know there are defective pieces and missing hardware. Then wait another few days for a new one to arrive so you can scrounge around for the missing and defective parts. Then plan on time for repackaging the defective one to get it ready for UPS to pick it up. If you are up for all that, it is perhaps worth it to you.I give it 3 stars for the look and feel of the final product.Advice: skip trying to fax the importer for replacement parts, as indicated on the instruction sheet since their fax does not answer. Call amazon directly for a replacement. They are great and always willing to help.

liked the ease of assembly, looks great for a night stand.all parts were set up for ease of assembly.

De los mejores muebles armables que hemos adquirido, se ensambla prefecto y tiene excelentes acabados.Definitivamente lo recomiendo por calidada-precio

Overall, I am pleased with this table. I am giving it a 4 overall because I am not particularly handy. I did not find it easy to assemble in spite of the reviews that said it WAS easy. That said, the handyman I called in didn't find it too tough to put together. Also, although it was well packed, one of the pieces was damages slightly and will require repair. All in all, now that it is in place, it looks great, is sturdy and is a nice addition to my guest bedroom.

Me encantaron, compré dos

I don't normally writing reviews but this one takes thw cake. I received my night stand in arrivale the package was q bit damage but i bypassed that i opened it uo and Styrofoam wasn't the greatest to protect the package qnd the Styrofoam made such a mess every where. Took me w hour to out together but the night stand isn't a high of quality there where a few pieced of the night stand that whete a bit chipped and one of the brissel boards for the drawer already had pain scraped off, also a few of the tracks for the drawers where loose i tried tighting them but no luck so i put it together and the drawers don't fit properly and i followed the instructions correctly. I dont think this is worth almost $100 paid with shipping. The night stanf is sturdy and it looks good from afar but once you get close you can tell its not in the best shape makes it look like i got it from a second hand store. I boughtbit for my room replacing anither old night stand i have so im not that picky just wish it was better quality better packaging if im paying $100 id expect better packaging and better quality. Other then that it is what you get i guess.