Non-dismantle Fuel Injector Cleaner Kit 800ML, Automotive Non-dismantle Fuel Injector Tester & Cleaner Fuel System Fuel Injector Cleaner Tool Set for Petrol Cars(0-145PSI)

seller stands behind their product and worked out the issues, worked great used on our 2004 chevy avalanche using schrader valve adapter plenty of room to work, wont work on 1987 corvette and 2005 mini cooper s with schrader valve adapter, no room for the long adapter, the weak metal schrader valve adapter broke. Ordered a quality right angle schrader valve elsewhere will attach it to one of the hoses that are in this kit .

Could have a better manual to avoid some guessing, but works well.

do not buy this piece of junk. it came all loose and pieces all over the place in the black plastic case. then i tried to use it on my car to clean out the fuel injector rail. the quick connect to the compressed air hose was defective. a strange size. was big like a 3/8th size but would not fit the connectors. i tried several in my tool boxes . i had to run to the store and buy an entire set of attachment pieces. i attached the 1/4th size and it screwed right in thankfully. seems to fit . now its dark and i lost several hours on this job so far. but everything else looks in order but lets see if it works tomorrow. do not buy this piece of crap junk. picture shows the jerry rigged brass air connection i made.

The media could not be loaded. This kit makes cleaning fuel injectors very easy. Fill the tank with your cleaner of choice, add the appropriate hose and fuel rail connector, connect shop air and start the car. A few minutes later you’re all done.

returned it due to regulator didn't work. you get what you pay for

It worked great, but one of my techs broke one the feeding & would like to reach out to customer service if they could sell me just a feeding by itself. But I can't find any customer contact information for this product.

My Explorer is 17 years old with 168,000 miles. It still runs fairly good, but not great. It also ran a bit rich. I connected the TABODD kit, and used Berryman cleaner. It runs great now! It idles smoother, accelerates better, and I think that the gas mileage has improved. Ford did not put a tap in the fuel rail for a pressure gauge or cleaner, but there are a lot of adapters for just about any car out there. They only reason I gave 4 stars is that the O-rings on the Ford adapter were a bit too thick, and I had to use a pair of pliers to attach the adapter to the fuel rail. The O-rings are a bit damaged now, so I'll have to get new ones that are a little thinner. I used a small compressor (6 gallon) but a 3 gallon or 1.5 gallon should work fine. The pressure regulator worked fine. I set mine for 5 PSI lower than the normal pressure of the fuel system. 25 PSI on my car. Buy an air fitting that will fit the air hose you have. I wish that I had bought this kit sooner! It will even work on old Throttle Body Fuel Injection system like my 1984 Chevy Citation had.

Very nice product. Again like the other kits, they need set up instructions for people that do know how to set up this unit. But after a YouTube video, you'll be fine! Nice quality product.