NEBULA Cosmos Projector Stand, Fits All Projectors, ¼-Inch Mounting Bracket, Mini Wall or Ceiling Projector Mount

I don't normally leave reviews, but thought I would here due to the slight issue I faced.The "stand" itself is really good so far, is sturdy & holding well to the ceiling so far. The issues I faced were that in the manual it says use an M6 drill bit for the holes, I did, but they seemed too small for the plugs to go in. I ended up having to redrill the holes with an M7. Once I had done that, I tapped then in to the ceiling using a hammer. The next slight issue came, which was that there was barely any thread having poking out to be able to screw the nut on. When I was on the last one, I realised that I could have used pliers to pull some more thread through without pulling the whole lot off the ceiling.Overall though it's a decent bit of kit for my Nebula Apollo to on go.

This works really well on the ceiling for my APEMAN LC550 that weights about 1kg. The screws that come with the product were rubbish however, so we had to use our own.

Its perfect i already screwed them to wall 👍

Works well, just a bit ugly having on the wall.

Very satisfied with purchase

A lightweight telescopic tube with a 1/4" bolt on a ball joint. This product lets itself down in three significant ways:- It has no adjustment for x/y panning so you need to be *super* accurate with your position measurements, or be prepared to re-drill and re-mount, or sacrifice image quality using keystoning. I think this fine tuning could have been done with a chunky ball mount at the base, or a slightly larger base with a means to relocate the stalk, or an offset cam on the attachment end of the stalk.- It has no way to collapse the height of the stalk, for ceiling mounting. The adapter should be able to be mounted directly to the baseplate. The projector is capable of projecting close to the top of the ceiling but the stalk would force it to be at least a foot down. In the end I discarded the entire stalk and made a custom ball joint retaining only the base, so overall a waste of money.- It has quite a narrow base in the case that it's wall mounted - I wouldn't trust it not to pull out the upper bolt. It claims '5Kg max' - many nebula projectors are ~4Kg - not a high enough safety margin in my opinion.The positives:- well finished- the 1/4" attachment is good- the adjustments for telescoping and ball joint seem sturdy

I bought a used one via Amazon. When I’d put the projector on, the end of the mount fell off! (See picture.) Thankfully I was still holding onto the projector.It doesn’t like it screws back on, but like the metal is broken. I’m hoping this is just the used one - perhaps it was returned for being broken and it was resold when it shouldn’t.The installation was fine. Instructions weren’t super clear but find a video about “sleeve anchors” to learn more. I had to go up to an 8 mm drill (rather than the stated 6) to get the anchors in.I’m waiting on a replacement and may update my review after that.

Good product

Terrible installation, the holes should be exactly 100% right if not you cannot fit to the wall.I managed to install by drilling large holes and hammer it down with the screws into it.I have no clue if it will manage to hold the projector =/.

Diese Beamer-Deckenhalterung hat meine Erwartungen übertroffen und ist ein absolutes Must-Have für jeden Heimkino-Enthusiasten.Die Installation war ein Kinderspiel – die mitgelieferte Anleitung war klar verständlich, und das Montagematerial war von ausgezeichneter Qualität. Die robuste Konstruktion der Halterung gibt mir das Vertrauen, dass mein Beamer sicher und stabil an der Decke befestigt ist.Die Möglichkeit, die Höhe und Neigung anzupassen, ermöglicht eine perfekte Ausrichtung des Beamers. Das Ergebnis ist ein gestochen scharfes Bild, egal ob ich einen Film schaue oder Spiele spiele. Die Deckenhalterung ist zudem so konzipiert, dass sie eine optimale Belüftung für den Beamer gewährleistet, was die Lebensdauer des Geräts verlängert.Insgesamt bin ich äußerst zufrieden mit dieser Beamer-Deckenhalterung. Sie kombiniert Funktionalität, Stabilität und Ästhetik auf beeindruckende Weise. Eine klare Empfehlung für alle, die ihr Heimkinoerlebnis auf das nächste Level heben möchten!

Decent quality and pretty lightweight. The mounting process was quite frustrating but that might be because of my ceiling. The plugs are metal and will 'swell' when the screw is tightened. This makes for a sturdy mount. These plugs kept falling out of my ceiling before the screws could be attached. when the plug stayed in the ceiling, the coordination to keep the rings from dropping while adding the bolt was the next challenge. One bolt that was provided didn't seem to fit the screw well. Advice: Mantle it on two instead of 4 ceiling plugs/screws. It will hang sturdy enough and will likely spare you a lot of frustration.

Ist stabiler, als man erwartet. Fest angeschraubt und eingestellt ist das gesamte Gebilde recht robust. Auch die Längenverstellung funktioniert sehr gut. Der einzige knifflige Punt ist das Ausrichten. Wenn der Kugelkopf aber mal festgeschraubt ist, verstellt sich da auch nichts mehr. Muss aber wahrscheinlich bei jedem Ab- und wieder Anbringen des Beamers neu ausgerichtet werden. Empfehlenswert!

Leider wurde das Paket beim Nachbar auf seinem Parkplatz geworfenPaket sowie Verpackung waren beschädigtDas Kugelgelenk klemmt nicht richtig. Man muss sehr viel Kraft aufwenden. Weiß nicht ob das von der Beschädigung kommt. Daher 1 Punkt. Abzug.Ansonsten macht die Halterung einen hochwertigen Eindruck die Montage war sehr schnell und macht generell auch einen guten EindruckAbgesehen von der Lieferung würde ich den Artikel immer wieder kaufen