Lizard Skins DSP Computer Mouse Grip For PC Gaming – Compatible Gaming Mouse Grip For PC 0.5mm Thickness – Cut To Fit - Easy To Install – 10 Colors

I got this for my gaming mouse (logitech g pro). I just put it on the sections that the tips of my fingers touch the mouse. I noticed a huge difference in grip, I love it. This is thin and lightweight. There is a self-adhesive, but it isn't too strong, so if you have to reset the "tape" then you can. I worry it might get dirty and lose grip, but one little sheet allows me to put the lizard skin on the mouse several times over, so I am not worried about it losing functionality over time. I guess we'll see how it works, but for now, 5 stars.

I bought an inexpensive mouse, but it was quite slippery. So I got the lizard skin and give it a try. A bit of work to get everything lined up correctly. But I no longer drop the mouse. Holds in my hand well, and I really like that even a light grip is enough to hold onto it firmly

Grip is great and feels very sticky. Has a good aesthetic look. Only thing to consider when buying this is the cut out process is very time consuming if you want to this to turn out good. Had to practice a few attempts and watch a few videos on youtube.

I used the lizard bat grip and lacrosse grip on my mouse before these came out.I would say both are pretty good with the bat feeling a bit smooth whenever my hands build up a bit of oil on them. I preferred the lacrosse more, while I had the bat in 1.8 mm so I can put them on my m4/m5 so they stick out more. But it's mostly down to preference between the two, and I have heard that hockey was the most popular.These mouse grips have small triangles as the design, so it feels grittier than the other grips while still being as grippy. You can still slightly move your fingers down the grip, but not as easily as the sport grips. I love my XM1 v2's coating so much; kind of funny they used the xm1 as the model because imo it's grippier than the lizard grips lol. As an improvement, I suggest that they remove the lizard skin logo and icon, as they are probably the reason I could slide my thumb moreso than my ring/pinky where I managed to cut around them. Just having a sheet of triangles would be better.They are also easier to work with, being a sheet rather than a roll. On the rolls, there would be flap with no adhesive on it, which 1) provides less adhesive when applied on the mouse, which was prone to lose adhesive and slide down the mouse, and 2) have an uneven surface to the rest of the grip, making it feel uncomfortable on the sides of the mouse. For those reasons, I tended to cut the flaps off when applying them to my mouse, leaving me with less surface area to use. The mouse grip sheet is easier to work with while also feeling subjectively thinner than the sport grips when cutting. The tracing paper is good, but you can just use painter's tape. There's also an alcohol pad, but I have plenty of those at home.I can't say anything on durability, where my main concerns are if the grips will slide down or if the triangles will get become dull.TLDR; If I were to rate based on grip I'd say xm1 v2's 10/10, lizard mouse 9.5/10, lacrosse 8.5/10, bat 8/10. If the XM1 is the best matte coating I've tried, I'd say these mouse grips are a pretty good rubberized equivalent. I hope they remove the logo/icon but I understand why it's there.EDIT 7/27/20; probably tmi, but dead skin does get stuck in the triangles. Doesn't affect grip imo, which has lasted. It's kind of cool imo because I can see where I place my fingers. You probably would have to cut a new set of grips to replace if it bugs you. Lighter colored skins would be better at hiding them.

I bought this for my son and works great for drag clicking!

The media could not be loaded.  I wanted to replace my mouse's old grip skin because it was already breaking down. This skin is grippier and thicker than my old skin. I have the Glorious Wireless D which has vent holes on the body. The old skin has the tendency to deform and bubble out at these vent holes due to how skinny that tape was. This tape on the otherhand is thick enough to not sink into these vent holes.The paper that it comes with is a big help but it does have the tendency to make the cutout a little bigger than what I had intended so I had to trim down the edges a little to make them flush with the mouse.My only criticism I have is that I wish the grip tape has a little more surface area for me to use so I could make a better cutout for the bottom part of my mouse (I just used the leftover scraps and had to come up with a descent design for the bottom).Hope the tape lasts for a while, only time will tell (especially for this mouse with vent holes). That said, I'm willing to grab another set of grip tape if I do need to change it in the future.

I've used this grip tape for more than a year now on the Logitech G Pro mouse (the right one on the picture). It helps with grip significantly on mouse sides and right+left button areas where the finish on the mouse is not a high-friction area but rather slippery, which for me can get real annoying when moving my mouse around fast.It has never showed significant signs of coming off, even after cleaning the applied tape with IPA on the surface. Yes, cleaning of the tape will need to be done from time to time due to it absorbing some skin oil and material over time. But a paper towel damped with IPA and gentle cleaning will make the friction and original look of the product come back to life.Fitting (for me) was a littttlllee difficult but once done you don't need to think about it again. Unless you vastly cut too small of a piece, I think in most cases non-prefect cuts will still work great to help with whatever you are going to use this grip tape with.

Perfect, I have tried a couple other grips and none came close to this one. The material is perfect, keeps that mouse stable and your fingers locked in. Buy this unless you have some special use case, this one is significantly better than any other mouse grip I have tried.

M42に貼って使用していますが、軽い力で持っても安定感があり、感触がいいです。公式サイトでプリントアウトする型紙がA4でしかプリントできなかったのですが、サイズが合わず一回り小さくなってしまいました。改善方法がわからなかったので目測で一回り大きく切って対応をしましたが、何かいい方法があるのかなーと思います。機能としては良いので☆5です。

これしかかってません！これ良いですよ。

これ絶対オススメ！必須！

マウスの小指の位置調節で重宝しています

ゴムというより伸びる布に近い感覚で張ることができます。写真はRoccat Kone XP Air に張ってみました。側面部分はエルゴノミクス形状でかなり複雑な曲面ですが、１枚で切り出して張っています。張る際のコツとしては以下のような感じです。①型紙をマウス曲面に張る際に多少ゆがんでもよいのでぴったり張ります。付属の型紙シートが薄くできており吸収できるゆがみに近い感覚になるので付属の型紙を使うとよいでしょう。その際、サイドボタンのような歪みを吸収しずらい部分に歪みが溜まらないようにして、歪みを外周部に押し付けていきます。②型紙シールを歪みを残したままうまく剥がしてスキンに張り付けて切り出します。その際サイドボタンのような部分が型崩れしないように注意します。③サイドボタンの位置のようなズレたら絶対困る部分のシールだけを先にはがして、そこから周りに伸ばすように張っていきます。伸ばす際に邪魔になるので型紙シールは先にはがしてください。少しづつ伸ばしては押し付けてしっかり張っていきます。最終的に外周部分に歪みを吸収して伸びた部分が余白として残ります。④外周をキレイに切り取ります。