ErGearDual Monitor Arm for 13-32 Inch Screens, Height Adjustable Stand with Tilt, Swivel, and Rotate, Solid Aluminum Arms, Corrosion & Wear Resistant, VESA 75 & 100mm, Silver

I would consider this really good value for money - its well designed and finished, simple assembly with plenty of provision for fixing different monitors to the stand - different size mounting screws, lengths and different spacers provided to suit all monitors. It also includes neat cable management.It fixes to the desk either via clamp (requires about 7cm under the desk), or via a hole through the table itself.The base pivot's hex screw is blocked by the clamp once assembled, its worth loosening them off a little before final assembly - The joints themselves come very tight from the factory but the rest can be adjusted once its up. hex keys plus a "bar" are handy for the larger screws as they are very tight. One of the arms can be removed if two monitors arent immediately required.

Relatively straightforward to assemble, has cleared so much space on my desk and looks a million times better now. I have 22" monitors and they were slightly too small to push the arms to have them next to each other, but with my laptop in the middle it wasn't a problem. My desk has a lip underneath so have had to wedge a book under so the clamp mechanism works, which seems to have done the trick (until I locate a screwdriver)! But I think that's more an issue with the desk than the monitor stand. Glad to have purchased it!

I picked this up on the Prime Day sale along with two 32-inch 4k monitors. So I was looking for a dual monitor stand to cope with these larger screens (both just over 6kg).When it came it was in a small box (HWD 6'x14x10' approx) and neatly packaged with the arm folded up and all various parts in bags (fixing to drill through a desk or use a clamp).It even came with two alum keys (still need a screw-driver) and various VESA standoffs and screws for mounting two screens.Instructions were okay and I was able to set it up and get the screens attached in under 30 minutes and on my own. It has built in trunking for cables (hadn't done this when I took the picture). Bear in mind that you may need some clearance behind your desk, for the arms, depending on how you want to position the screens. Hardest part was getting the cable trunking done with the monitors and desk in situ.The gas springs work as intended giving you finger-tip control of the position and can be adjusted with the alum keys depending on the weight of the monitors.They fit the 32 inch screens and have now been sititng on my desk for a number of weeks without moving or any other issues.Build-quality is fine, it's not going to blow you away, but it seems sturdy and sits fine. Took a few attempts to get the monitors sitting in the position and height I wanted.Would recommend over my old arm which was a cheaper non-gass model and was a nightmare to position and setup.

These are very heavy duty arms.Bought on the recommendation of our IT supplier, a few years ago, we now have 8 sets of them. I am no DIYer but have managed to fit and adjust them all - there is a knack to it.It probably takes 20-30 minutes to install them. There are plenty of fittings supplied, to suit most desk arrangements.Stand well back when snipping the plastic tie holding the arms together in the box, as the hydraulics will spring the arms open and could cause a bruise.I used the clamp arrangement as I didn't want to drill holes in our new desks. The clamp setup is probably for a thicker desk that ours, so I had to plug the gap of around 1 inch under each desk with old books.Once in place, these bad boys are going nowhere.Overall I am very happy with these - great value for money.

I avoided the cheaper options and went for this mid priced one and don't regret it. Clamped to my 2cm thick Ikea desk this sturdy stand is supporting 21 and 24 inch monitors side by side, angled in towards each other slightly.This has cleared up loads of desk space. Had to adjust the tension of one slightly at the start but other than that I haven't had to touch them since. Convenient that you can attach the back plates to the monitors separately, then drop the monitors into position. It is sturdy with no noticeable wobble.The silvery finish looks good, from what little you can see of them under the monitor.The cable tidies work well.What else can I say? Despite the typical Chinese anonymous branding that is omnipresent on Amazon these days, it is good quality, does the job!p.s. read the warning leaflet before you snip the cable ties or the arms will spring open and could be quite painful if they punch you in the chest, drop on your toes or worse!

Very good quality and very sturdy product. 5 stars.

I'd say its a decent mid-range monitor stand. I'm using it for 2 27 LG GN850 monitors and I don't have any issues such as dropping etc.PROS:- easy to install and setup- sturdy at least for 27" monitors(havent tested with bigger ones)- integrated cable management solution- available grommet mountingCONS:- No color variety (I know that this might sound irrelevant to most of the people, but if you are trying to create a beautiful setup, stand color is a major factor. I really don't get why brands don't provide at least the basic colors (Black, White and Silver), there are few decent White monitor stands on the market and they cost a fortune ....)- limited adjustments

Got a 6kg monitor, and it can't support it, just drops down. Waste of money. Does as worse than the £20 piece of rubbish I bought a few years back.

Sehr stabil und leicht zu montieren

Lo utilizzo per due monitor da 28 "Ottimamente realizzato e confezionato, con dotazione completa per diversi tipi di montaggio.Movimento libero a 360* non fluidissimo ma adeguato.Avrei forse preferito snodi con step a 10/15° perché così è quasi impossibile regolare i due monitor alla stessa identica inclinazione e il mio OCD ne soffre un po'.A parte questo, praticamente perfetto.

Pues eso. Son súper firmes, se pueden regular los brazos en base al peso del monitor así se pueden subir o bajar con solo un dedo. Volvería a comprarlos. Los recomiendo.

Mon objectif initial était de trouver un double bras qui me permette de libérer complètement la surface de mon bureau pour pouvoir poser mon avant-bras tout entier et soigner une tendinite du coude (posé en partie sur les accoudoirs de ma chaise de bureau). Il fallait donc que les bras puissent reculer dans le vide vers le mur tout en n’impactant pas la position souhaitée des écrans. Objectif atteint !Même si l’angle des bras près du socle n’est pas réglable (ma crainte au départ), tous les autres le sont et permettent de s’adapter à tous les besoins. Les bras sont robustes, le serrage du socle avec gomme adhérente suffisant, les réglages sont très précis mais il faudra ne pas hésiter à serrer « comme un bœuf » la vis de la tête pour être certain que le poids des écrans ne les fasse que pas s’incliner.Le prix attractif (promo -15% ponctuelle à 67€) a fini de me convaincre. Achat sans risque.

Un peu difficile à serrer correctement mais la qualité est top !Très robuste !Il manque un peu de mouvement on ne peut pas les mettre facilement dans tout les sens !