Garmin0101165407 Handlebar Mount for Montana/Monterra

Mounted on ATV. Holds GPS securely.

This product installs easy is very weather resistant and durable. I would buy it again.

One very clever feature to point out - the diagonal length across the four bolts that hold the garmin cradle to the garmin mount is a match for the bolt pattern that RAM uses for its ball mounts. I was able to remove the four bolts, separate the garmin cradle from the garmin mount, and re-bolt a 1" RAM ball mount to the back of the garmin cradle (bolted through upper left, lower right holes) so that this could be used with other RAM products. I didn't want to use the RAM cradle for my Garmin 680t due to the reports of the roller popping out. This Garmin cradle is SOLID. I did have to purchase two new bolts/nyloc nuts locally to bold the garmin cradle to the RAM mount.

Fast shipping, perfect match for garmin Gpsmap 276cx

Its hugely large as compared to the mount I was using for a 76csx, somewhat over designed for a Montana but it is certainly suitable for the job.Incidentally, the box also included a packet of 3 anti-glare screen protectors for the Montana which were not mentioned in the product description.Update:To provide a locking feature seemed somewhat strange in light of the fact that the mount itself is attached via 2 easily accessible knurled thumb nuts. A thief could remove both GPS and mount in less than a minute. I replaced the thumb nuts with 4mm nylon insert lock nuts (41 cents for 8 at Lowe's) so that now, it at least takes a 7mm or 9/32 socket wrench to remove it or, many minutes with pliers. Also, the knurled thumb nuts didn't work out well for me because I couldn't keep them from loosening on rough roads without further tightening with pliers.The lock feature is a captured torx screw. Its a good idea to use a torx driver as a key because its easily replaced if lost and few people are likely to be carrying one even if they figured out that it was preventing the GPS from releasing.After a few months using this mount, I'll bump the rating up to 5 provided the nuts are switched out.For short trips away from the bike I do use the locking feature, then place my helmet over the GPS so as to make it less obvious.

Product when mounted does not fit the unit, literally will tear the back cover off if you try and mount it in the holder

This is the standard AMPS mount for a Garmin Montana or Monterra handheld GPS unit. It carries 2.5mm mono audio and a few power wires from the mount down the line to your battery, audio hookup, whatever. This is my third and they are all rock-simple to intstall, just screw the thing to your RAM mount or whatever you’re using as a base and off you go. I’ve got them semi-permanently installed on two Tiger 800s and a quad and they work great, even in vertical rain like the other day where my Son and I were running a pair with no problems.PROTIP: The little silver knurled thing in the box takes apart. You’ll find a small Torx wrench for fixing the unit to the mount more “permanently” and defeating casual snatchers instead of using the button release and putting it in your pocket. Kinda handy for quick trips to the potty where you might not want to pack everything off the bike.

The first shipment of this item did not arrive and I submitted as much at Amazon. Requested replacement and it arrived 2 days earlier than the already quick delivery I was promised. I needed this for the weekend and it arrived on Wednesday instead of Friday I expected.The item is exactly what I needed. and it appears included anti-glare screen protectors.

The first mount was delivered with parts missing. That was quickly remidied by Amazon . The mount was of excellent quality and the gps fit nice and secure

J'ai utilisé ce support pour fixé mon Garmin Montana 610,Support vraiment adapté et sécurisé, par contre je pensais que le support était rotatif pour choisir entre le mode portrait ou paysage

Facil de usar

Se hai un Montana 650t e lo vuoi in bicicletta con te, non puoi fare a meno di montare questo supporto. Il prezzo non è bassissimo, ma è marcato Garmin ed è la culla ideale per il computerello di bordo. Viene consegnato dotato di chiavetta per serrare il Montana una volta inserito nell'alloggiamento, cosa che avviene perfettamente con le tacchette predisposte. Quanto a solidità e stabilità, ho provato a sollevare la bici con il Montana inserito: nessun tentennamento. L'unico handicap è il peso del Montana rispetto agli attuali computer di bordo, ma non devo fare nessuna crono-scalata e quindi ok. Un saluto. Luca

Goede verkoper top originaal product.