E-TECH EC003 NEW MODEL HEAVY DUTY ADJUSTABLE EXHAUST PIPE JOINER/CONNECTOR 39MM TO 41MM, 125MM LONG

Upon opening the package after delivery I was very surprised at the excellent quality of this product.Didn't expect it to be up to much for the price paid and rapid nxt day delivery.The clamping system is much better than the u clamp system that snap off very easily and rust out in no time. I've tried most exhaust clamps on the market all have failed apart from this super easy to install heavy duty 1st class clamp.This clamping system on product is much much easier/safer and is made of quality stainless steel.I will definitely be ordering again very soon.110% Recommended!!!!

Extremely high quality, packing was perfect also.Used for an exhaust joint which would not seal.Used some product (exhaust sealer) and tightened the 2 bolts, each one at a small time.Can take alot of pressure and will buy again, I reckon these will come in handy not just for exhausts but for all sorts

This heavy duty pipe connector is as described, there is plenty of adjustment and it makes a good tight fit.I used this as a replacement for an Audi A4 1.8 TFSI petrol 2010 exhaust coupling sleeve that had corroded (original item measured at 55mm diameter and 95mm long). The Bits4Reasons EC013 is an ideal replacement, the additional length (125mm long) was not a problem. and the adjustable diameter was perfect. You'll need a deep 17mm socket (make sure its a deep-socket as the threaded clamp studs are quite long). Grease it up with high-temperature copper grease if you want it demountable, or a jointing compound if you want a solid fix. Ideal replacement part.

Oh my, it's fantastic and thanks alotI had to cut this pipe as the exhaust was longer than my original, I used this connection once shorten to join them together, abit of exhaust paste in the middle, really tight fit once tightened, and passed MOT with no gas leaks, brilliant product

Unfortunately these are not quite the size they are advertised to be (I bought them as 57-60mmIn reality the have a range of 60/65mm making them too big, with a bit of bodging and sealant I can get them to work but it’s a shame because 57-58 mm would have been a perfect fit for the job I’m doing.The quality and strength of the material is very good though.

Had to separate the exhaust on my Passat 2.0tdi and the old exhaust clamp, although the sleeve was ok, the clamps had nearly rusted through. Amazon prime got this one to me quick and it fits really well. Sleeve and clamps are really strong with M10 bolts, everything BZP for corrosion resistance. All thicker gauge steel that the VW OEM that I pulled off. The only way you could really improve it is if the sleeve was stainless steel.

This was to replace a rusted joint on my 2006 vw sharan (2L diesel)Fitted perfectly, took all of 5 minutes to fit, went straight on. Perfect.Advice! If your working under a car make sue the car is supported on stands and please for the love of god DON'T use those scissor Jack's that come with the car, the dangerous!

Great sturdy exhaust repair - better than a coke can! I just sealed the ends with some exhaust repair tape as an extra precaution.