✨ Light Up Your Flight Experience!
The LED Light Strip for RC Fixed Wing Airplanes is a lightweight, super-bright lighting solution designed for various fixed-wing models. With a length of 0.5m and a voltage rating of 4-6V, it enhances visibility and style, making it perfect for both indoor and outdoor use. The package includes two LED strips and a Y-cable for easy installation, ensuring your aircraft stands out in the sky.
Color | White |
Brand | elechawk |
Indoor/Outdoor Usage | Indoor |
Light Source Type | LED |
Power Source | Corded Electric |
Light Color | White |
Theme | Airplane |
Style | Modern |
Controller Type | Remote Control |
Number of Light Sources | 2 |
Wattage | 1 watts |
Item Weight | 13 Grams |
Item Dimensions LxWxH | 5.91 x 3.94 x 0.39 inches |
Control Method | Remote |
Water Resistance Level | Not Water Resistant |
Manufacturer | elechawk |
Part Number | wing-led-RGB |
Item Weight | 0.459 ounces |
Product Dimensions | 5.91 x 3.94 x 0.39 inches |
Item model number | wing-led-RGB |
Assembled Height | 1 centimeters |
Assembled Length | 15 centimeters |
Assembled Width | 10 centimeters |
Batteries Included? | No |
Batteries Required? | No |
R**P
Super cool and bright
I actually zip tied one strip on each side of the chassis. I don't like having wires attached to the body, because it's a pain when I have to take it off to change the batteries. Many people say the sticky strip doesn't hold. I didn't even bother with it. I put them on a Revo 3.3 chassis (converted to electric) and put a 1/10 Slash body on it. I think it looks pretty cool. I'm going to buy more and put them on all my vehicles.
A**D
Led lites
I like them a lot I will be ordering some more LED lights I like the brightness of the LED bulbs
W**H
Bright
Very nice easy to install and you can cut to length. You can cut pieces off at any length and solder wires to it and it works great.
S**T
Easy to install. Awesome look.
So far so good. Super bright. They were easy to install to frame and plug into transmitter. Looks awesome. Just plug into any open channel on ESC.Followup: Adhesive strip don't last long, I had to use super glue or you can use gorilla glue to hold lights on. I applied glue to adhesive side.
D**.
LEVEL UP 👆 ADD SOME LIGHT TO YOUR RC FUN!
These lights add a whole new level to the RC Hobby 👍and they add a great look for night driving and definitely makes it much easier to track your RC vehicle at night! Its a Great up grade at a Great Price and actually a quality product I have used these on several vehicles and they hold up well if applied properly. They got it right with these, you can even custom trim them to the size you need and reconnect them with adapters you can order if needed and switch colors etc, the possibilities are endless. The pictures give you an idea of what the outcome can be on several Traxxas vehicles. If you strategically place them and make sure you clean the surface with alcohol etc well first then upfront were the wires go over protect it with some ShooGoo and use that to tack down the wires in the bucket too your good to go. You only need about a 5 inch strip on the outside edge on each side thats it it might not seem like much but trust me it is. Each vehicle the length of ok light strip length varys it may be 6 inchs on 1 you will know. 😉 💕❤ 🚗 💨💨💨I hope this helped Good Luck its alot easier than you think Go for it its under $10 great modI have added several of my trucks and they have definitely enhanced my collection and for under $10 each how can you beat that and if you do it right they stay on there very well. Ofcourse if your a basher there are never any guarantees Bashers are made to destroy which I never did quite understand 🤪👈 lol
E**N
Confused
So I ordered 3 sets of these lights, 1 red, 1 blue and 1 green. The red arrived with the light strips in nice heat shrinking with a seperrate y connector. But the green and blue arrived with no covering and seem much less sturdy then the red color. Which is highly confusing to me since they're all from the same company and models just different colors. So the lack of quality control is concerning and one of the strips (unprotected blue) stopped working when they get wet after running my rc truck after a light rain. I was under the impression these were water proof but I imagine the red color is only since they're the only ones with a cover. So I'm obviously not sure why there's such differences in basically the same product. But the lights are fairly bright and easy to install.UPDATE: their customer service reached out to me and helped satisfy my situation to the point where I can say they have amazing customer service. Just knowing the peace of mind of how firmly they stand behind their sales makes me feel so much better.
C**H
Cool lights
The only reason I didn’t give it 5 stars is because one light strip would not stick so I had to super glue it on. Other than that. They look amazing
I**E
Works for me
I used these light strips when painting a body for my Granite. They turned out nicely. I just hope they will last, lol!
R**D
Love it.
Great lights for the inside of my RC. Definitely adds to my theme. Love it.
D**E
Just as described
They really are nice and bright easy to use but yeah the adhesive strip is pretty useless so i hot glued mine in, also these are better when used with a light controller and used with a 3rd channel though so you can make them flash or turn them on/off
F**Z
Tira Led muy luminosa y adhesiva.
Iluminación del ala de un avión con parte de la tira.
M**E
Top
Super effet, luminosité très efficace
A**E
Helle Led
Top Empfehlung
Trustpilot
2 weeks ago
2 days ago