SEDNA - 2.5" / 3.5" Hard Disk Rubber Stand ( 3 Kits per Package ) - HDD / SSD not Included

These worked perfectly, They are both sturdy and easy to assemble. I used 2 of them on HDDs and realized the case for my SSD was not going to work in a new system I purchased so tried using the 3rd one on it and sure enough, it worked wonderfully and I was even able to stack it on top of the HDDs by locking the single corner part in. their size differences did not matter.

Modular, quiet, and simple, but yes for some rubber cutouts, EXPENSIVE. BUT. This great for PC building. I put them in a server (cloud for the house) with free NAS and 10 hard drives and these rubber molds make everything silent. They are easy to fit, take up almost no space, give good clearance for air to run over them, all in all it is a good buy. Expensive buy, but the idea is what you are paying for.

Product meet my expectations and was exactly what I needed.

This product works EXACTLY as advertised and I was able to use it to bypass a limit set by my computer case manufacturer. They put a hard drive cage in the bottom of my case for ONE 3.5 inch drive and two 2.5 inch drives. I was able to remove that cage and replace it with two 3.5 inch drives joined together with this rubber stand.

Good quality for what it is. I took out the mounts inside my case and able to mount 3 hd in that spot now. Would be nice if Amazon has these in stock

Pretty close to junk. Poorly made and very expensive for what you get in the box.

really saved desk space

They never arrived when I ordered this initially but when I got it, super convenient for cases that don't have enough HDD mounting spots, definitely more secure than mounting it loose in the case, even if they are not sitting flat somewhere the shock absorbption works really well. I Im using this on a home lab/home NAS setup because my PC case doesn't have enough 3.5-inch mounting spots, and it's incredible. I Im really impressed. Ive been using this for three months, and I im very happy with it.

Premessa: non c'è modo di ancorare al case a menochè sul piano non ci sia la possibilità di mettere delle viti invitandole dal fondo del case in modo da farne entrare la punta almeno in una delle 4 fessure che c'è sotto ciascun piede di questi supporti in gomma. Per il resto il prodotto è eccezionale!!!! Le uso al posto del cage originale del Corsair 7000D airflow che è a dir poco osceno perché gli hdd ci navigano nei supporti in plastica hot swap!!! Vibrano da far diventare il case un frullatore!!!! Per il resto case magnifico!!! In una confezione ci sono 12 supporti in gomma, viti adatte per ssd/hdd da 2,5 e anche per hdd da 3,5, se intendete usare un adattatore da 3,5 a 2,5 potete usarlo tranquillamente perché si incastra a pennello nei supporti in gomma con le viti più lunghe. Gli hdd ormai non fanno più rumore!!! Grazieeee!!!!

Simple product, very well made. It was very simple to put together. Place your 2.5" disk or SSD to matchup with the screw holes and screw in the provided screws with a small star screwdriver. Do this for all four feet and you will have a neat little rack with your drives. Remember to include a SATA cable at the back with USB at the front. Easy. Cheers.. Enjoy..

Be sure to install the supports in the correct orientation. Mine did not include any instructions for installation, and I installed them upside down. They do not fit 3.5" drives correctly when installed upside down. My case does not have enough bays to install all of my drives (I have 6), but these supports enable me to install them all. The supports are quite expensive, considering that they are just molded rubber, but they do the trick!

Great stands for stacking hard drives outside of a case. I'm using it with 2.5" drives. Works well. My stack of 4 drives is much cleaner on my desk now.

Works well, have to be careful in placement of unit, to avoid accidental contact.