3/8" x 12 Inch Heavy Duty Short Air Compressor EPDM Rubber Hose 300 PSI: 1/4" Male NPT to 1/4" Male NPT Connections With Quick Coupler Brass Fitting

The Quick coupler brass fitting is hard to use and has a lot of movement once connected. So I did not use it. But the hose was just I needed.

I purchased this to replace the original hose on my Snap-On Bluepoint tire inflator. It was much less expensive and was a prefect fit. I inserted a small O-ring in the inflator female threads to ensure no leaks. It worked perfectly. The hose is quite flexible even when cold and seems very sturdy. I would definitely recommend.

My compressor runs a little hot in it's old age, and this didn't work for me on a port that was measuring around 212 deg. F. The pressure never got above about 50PSI before I started getting bubbles coming out of the fitting right where it ends attaching to the rubber hose. So the specs saying it's good for 250F are not correct. I returned one, to try a second hose, but didn't bother to send the second one back--but it failed the same way for both hoses.Both hoses worked fine in cooler settings (tested first as I was HIGHLY suspect a rubber hose like this could handle high temp AND high pressure). Anything less than 180 degrees F seemed to be fine, just couldn't handle up above 210 with starting to leak.

It was exactly what I was looking for but it was a tight fit so if you’re not sure you exactly need 1’ I’d go a little longer

You are buying a hose…i banished fitting into darkest corner of my garage because female has plastic innards!

Just as advertised. Nice copper couplings. Tape included!

I was surprised it came with fittings for the same cost as other air hoses of the same size. I used this hose to connect my hose reel to my garage air line. Worked perfectly, I just changed one of the end fittings. Great product!

Worked perfect

Used this for compressor outlet to moisture trap. Used the threaded fittings. Fits well and feels right.