Full Motion TV Wall Mount Bracket Dual Articulating Arms Swivel Extension Tilt Rotation for Most 26-55 Inch LED, LCD, OLED Flat Curved TVs, Max VESA 400x400mm and Holds up to 99lbs by Pipishell

Decided to mount this nearly flush with ceiling so lifting and holding up a TV by myself seemed like it maybe somewhat daunting if I couldn't get the television lined up easily. Bought this because it looked like having the clearance from the wall, the tilt etc. would make it easier to mount the television. I mounted the tv on my first try. It was pretty easy to set up, didn't need an impact drill, just a good socket set. Overall nothing bad to say about it all. I am thinking about buying another.Update: This mount is incredibly easy to use and set up, so I purchased a 2nd one for my other (heavier) television. Mounted the television on the first try.

Instructions were easy to follow, measured where we wanted it to go, marked it and found where the studs were in the wall. Drilled hole, set the wall mount against the wall on the marks and mounted it to the wall. put the monitor bars on the back of the TV/monitor mounted the Tv to the frame and tightened the bottom of the brackets to secure the monitor. Installed within an hour. works great. Gives me more room on my desk and i am sitting up straighter with the added height, easy to adjust its position. Feels secure.

Holds my 55” tv. Easy to install and extremely sturdy. Love the design. I do recommend you get at least 2 screws into a stud. That’s all I got and it could hang me from it. This thing is a horse.

Braniac who created this swivel bracket omg is a freakin genius. My husband is being lazy and has not installed. He now says its because he is buying a much bigger tv which I am holding him to it but anyway I opened the packaging and we reviewed, this is bomb. It swivels all directions and you can see how the tv can be viewed from one room to another just by swiveling. Cannot wait for my "huge tv" so I can see this on the wall.

This mount was really easy to install and easily holds my Hisense 55” TV. I replaced a flush mount with this one, so I could easily pivot the TV out of the way to access wiring in the back. I already had power and signal cables run in the wall, and I just wanted to install this bracket right over them, like my previous bracket. What I didn’t realize was how SMALL the cutouts are in back of this bracket. Barely big enough for an outlet, as you can see in the photos, and I’m going to have to install a single receptacle outlet, so the plug doesn’t interfere with the arms. Also the wall bracket is EXACTLY wide enough for 16” center studs, so if you are dealing with anything wider I would look for a different, wider mount. Overall a good, sturdy wall mount system, but the clearance issue with the receptacles is an annoyance I didn’t see coming so I wanted to mention it.

My kids bought me a 40" TV for the patio with a fairly expensive mount, only to find out that the TV had screw holes closer together than the mount supported (even though it said it supported 40", the VESA standard has many different specfications - So is it really a standard?). This mount however is much more versatile and supports a wide range of TVs and mount points. Installation was easy. and I would recommend this mount.

Pretty easy to install. Holds my TV great. I use the swivel features a lot. The tilt up and down is designed to be set once and left. This is good. The idea is that you are most likely to watch a TV on it from two different places with your eyes at about the same level. I watch it while on my exercise machine, and also while seated at a workbench across the room. I got a comfortable angle for both views The mechanism to secure it is sturdy, and it keeps the tilt despite me adjusting the left-right angle and pulling it away from the wall almost daily, each time I switch from exercising to working at my bench. I had a previous, simpler mount from another manufacturer before this, and that mount was very difficult to install, the swivel didn't work well. I hated it so much I spent the money to get this one, and was very glad I had done so.

Jumped on this when it went on sale. I didn't expect the price would be this low as I have always wanted a mount for a few years now. After house went complete remodeling, decided to hang on top of fireplace, a decision not regretted.Package arrived sooner than expected. The box was smaller than I thought, but luckily it didn't miss any components. Items inside were in perfect condition. It included much more screws than I needed, because it thought of concrete/mason walls, which I don't have.Installation was easy after you find the location of the stud. Make sure you carefully measure the distance/space of tv and the bracket to ensure final destination if what you wanted, and that it fit the wall/trims, etc. For example, I'm placing on top of the fireplace mantel. I know the wood beams running vertically. I placed the mount on the back of my tv first, measuring the distance between bottom screws to the bottom side of the TV. Since I want the TV to sit flush with the mantel, I need to do this. I want it to be flush to hide the cables. If you don't, the TV might ended up too low, unable to sit flush on the mantel. It might ended up too high, exposing too much space and show the cables. This took me a while to ensure I have the correct measurement.Next just drill the holes, and tighten the included bolts. They look sturdy and strong. The wall mount is up.Screw on the brackets to the back of the TV, very easy to do.I am glad that the mount has a L-shape placement to hang the TV with the brackets install. This makes final installation way much easier than I thought. I did have my wife to help me hoist the TV up, but once set on the L-shape thingie, we could let go of our hands. Next, just tighten a couple more screws, and TV is firmly set.After connect all power sources and cables, turn on the TV and play with the adjustment of height, left/right until you are satisfied. I wanted a mount that could adjust downward, meaning if TV is too high, I would love to have the option to pull out, and down. This one doesn't offer, but I do noticed that the TV seems to come down a couple inches, maybe because of the weight of TV pulling it down? I checked the back and the bolts are firmly in, so not afraid that it will come crashing down. Actually in fact I like how it looks as it hides more cable.Overall, if this fits your TV, this one is a no brainer. Great pricing, easy install (does take a partner to hoist TV up there), and durable.

I bought this for 32 inch TV. It was the cheapest one I can found and its worth it. It is very easy to install. All hardware were in the box and nothing was missing. The only reason I gave four star is because its little flimsy and what I mean by that is there is little play which would make tv tilt sideways if you use included bubble level to do setup. Tv kind of look angled sideways.. Front and back have adjustment for tilt but sideways is not.

Facile a installerLe plus dure est de trouver les montantsSinon génialUn rack dans le salon et un dans ma chambre

Is anything made in North America anymore?Works well for the money.

Came fast was easy to install. Still holding my tv after a week lol

Very good