GBFSentryLink Smart Full IP Video Door Station/Smart Video Intercom System for 8-1000 Units Apartment (Surface Mounted)- 1080P HD Camera, Control Two Locks remotely, Built-in Card Reader

We purchased these for two 8-unit apartment buildings we are updating. We wanted an entry system that's simple and intuitive for visitors, easy for residents, and that we can manage remotely from anywhere. Our old systems looked terrible and extremely dated: scratched up aluminum boxes with push buttons and little slips of paper for the tenant names and unit numbers, and grubby phones and call boxes next to the doors inside the units.We wanted something that would communicate to residents and visitors that this was an up-to-date, well-maintained building, and also something that would future-proof us somewhat, and we wanted to get rid of those ugly and unsanitary phones and call boxes, along with the maintenance responsibility for them.We figured that everybody has a cell phone or tablet, so let the residents handle that side of things. Plus, if they were at work or something they could still buzz Amazon or the dog walker in from there. We'd installed internet for our other IoT -- the new boilers that send us alerts before something's wrong, the keyless unit locks, the solar panel egauges, etc. It's pretty much the way everything is going.First we went with an LTE system. Big mistake. It was confusing for visitors and not customizable, and kind of a pain to manage through send it text codes. When it got cold out, like below ten below - these buildings are in Minnesota - it called every number in the directory all night long over and over. We didn't want to make another mistake like that so we did a ton of research and settled on two options: this GBF Sentrylink system, and a similar system by Alphatouch.Both Sentrylink and Alphatouch do what would seem obvious: take a tablet with a touch screen and use it for an entry system. It's really hard to believe how backwards the building management space is, but almost nobody is doing this yet, and there are tens of millions of buildings that need it. These two systems are on the cutting edge and really they should be in every new and remodeled multi-tenant building in the country.We ultimately went with the Sentrylink system because it offered more flexibility, it had lower long-term subscription costs for the cloud plan (Alphatouch requires a minimum 20-unit monthly subscription; Sentrylink does not, and is currently free for buildings with less than 15 units because they have such minimal cloud use) so I didn't feel like the entry system was a loss-leader for the cloud fees, and finally, the GBF customer service team was exceptionally responsive even to questions we had before purchasing, and we figured that kind of responsiveness and support would be important in adopting a new technology.Installation is about as idiot-proof as you can possibly get, and far, far simpler than our previous system. For a front entry system, that means you plug in 3 wires per their wiring diagram: a 12-volt power wire (or nearby 120v plug for the included adapter), a 12-volt doorbell wire run to the door's electric strike, and an ethernet cable run to the building's internet router (or to an ethernet wifi adapter, which you can buy for about $50). That's it. You run them through the hole in the back of the stainless steel housing, screw the housing to the wall, plug them into the three spots in the back and lock the thing in place. Done.Then you email all your residents a link to download the app (available in iPhone and Android), log into the property management portal from your computer, and set them up. However you type in their names and unit numbers/letters is how they appear on the system's touch screen. Totally up to you. After they have created an account, you also have the option of entering a "display name" like "Resident" or "Penthouse" for them if they don't want their actual name listed for privacy reasons. This is uploaded to the cloud and pushed to the system in about 5-10 minutes.When a visitor touches a resident's name to get buzzed in, the app pops up on their phone with a notification and they have the option of opening up a video call to see who it is or they can decline or slide a bar to buzz them in. They can also set up a temporary passcode if they have a visitor staying with them or to let in a delivery person or a dog walker or similar. The great thing is most people have their phones close at hand so they don't have to get up and walk across the unit if they're watching a movie or cooking dinner or something, and if someone bypasses the system and just calls them on their cell, they also have the option of opening the app and swiping to buzz them in.From our perspective as building owners, it's easy to manage and update. If a resident moves out, we open the property management portal and delete their access and within ten minutes they and any roommates, visitors, or other associated authorizations are also deleted. When adding, we enter the name, email, and unit number and email them a link to the app, and we're done in less than a minute. So much easier and more professional than our old system.Also, it's tough. It weighs about ten pounds. The housing and integrated rain hood are thicker than either of our past systems. It's held in place by a couple of Allen screws and also locked in place using tubular locks. I do have concern about how they will stand up to the weather and need to remember to spray some silicone in them.It's also a more secure system, even as it give residents and managers more flexibility, because it logs every access, as well as photos or videos of visitors, and those records are available to the building management, so the mass button-pressing until someone lets you in becomes a thing of the past because the anonymity and unaccountability are taken out of the equation.The GBF support people say they will soon provide a link for updating the screen-saver images so you can load custom images of your building, or advertisements even. That is an important feature for us. Also, the system has an external API that can be used to integrate it with other equipment in your LAN if that's important.But it's not perfect (yet, anyway). There are a few glitches we've encountered.First, for some strange reason, a resident has to create an account in the app before you as manager are able to save a display name for them. This seems backwards to us.Second, you can only create one resident per unit number. The system regards them as the primary contact for the unit, and then it is up to them to share system access via their app with other residents of that unit. This, again, is backwards from the way we'd like it as building owners. We want to be able to provide system access to each person on the lease from our end, which is also better for visitors, so they only buzz the person they are coming to see. The work-around for this is to create a unit record for each individual resident, instead of one for each unit, but the system requires each resident to have unique unit numbers, so if you had, say, 3 residents in unit 304, you'd have to list them as being in unit 304-1, 304-2, and 304-3. Not ideal, and possibly confusing to visitors. Unit numbers should not have to be unique to a single resident.Finally, the unit currently only uses ethernet for internet access. But the underlying Android architecture does make it possible that the system firmware could be set to function over wifi or even using LTE. Making these options available, since the hardware and system software is already in place, would seem to be an inexpensive way of improving the system's flexibility and appeal while saving customers money.While they leave some room for further improvement, these faults were not dealbreakers and the system's many other benefits still placed it at the front of the pack for us at this time, and heads and tails ahead of most of what's out there.In summary, if you want to compete for the best residents at any price point, all other things being equal, the GBF Sentrylink is a solid investment with big returns in terms of improving your building appearance, tenant convenience, security and flexibility, management convenience and professionalism, and the ability to manage the property and provide service access remotely.

I have both the GBF "DoorDeer" Sentrylink and the DoorBird D21DKH intercom systems. The wide user touch screen on the GBF is very user friendly versus the tiny screen on the DoorBird. The sound speaker is louder on the GBF versus barely hear anything on the DoorBird.The app experience is instant on GBF while you will experience a lag on the DoorBird when you unlock the front door via the app.These issues maybe minuscule, but it becomes very annoying for the daily users such as myself.Install was easier on the GBF also with only 3 wires to connect.

The biggest problem that I had with this is that no one does installations. There is one person in Chicago who can install this. It’s almost impossible to do yourself.

I bought 3 years ago first system for a new construction of 45 residential units. Easy to install.You need a good interned cat 5 connection and to download the app.It’s running now seamlessly for last 3 years.You can update from your computer the tenants info when needed and generate temp codes for cleaners and deliveries.It’s so good that I bought the 2nd the 3th system for my other buildings.“ perfection” it’s one word for this system.

Very happy with it. It works as advertised. Their customer support is very good and eager to help and answer any questions.

Amazing product highly recommendedOutstanding tech supportSystem extremely easy to use and setupA plus

GBF SentryLink mobile app does not work on Android. Useless.

I recently installed the GBF Sentrylink for our 3 unit condo building of which I own 1 unit. Our building was constructed in 1999 and had been installed with the traditional wired intercom system with a intercom in the hallway of each unit that allowed verbal communication with and opening the door for the person ringing the bell. This old system was working well, but we were looking for a better solution; The main requirements from the 3 unit owners were:- A solution that is modern and easy to use for the tenants- A solution that is secure and allows better access management than keys that could be duplicated and distributed without control.- A solution that would not add to our monthly HOA fees.In my investigation I looked at Swiftlane, ButterflyMX, Sentrylink from GBF and Alpha Communications. The main reason for ultimately selecting the Sentrylink was cost (self-installation and low/no monthly fees) and a feature set that was basic, but more than sufficient for the needs of our small apartment building. I was also swayed by the reports in various reviews of the excellent support from GBF (Alan) - I full agree with those reviews - Alan was very responsive, diligent and thorough throughout the process from evaluation through installation and operation.- InstallationThe installation was easier than I had anticipated. There are 4 components that need to be connected; The panel itself, a door strike, a power supply for the door strike and the router for the internet connection. In addition to those components I opted to include a UPS (the black box in the picture) so that my panel would continue to work for 2 to 3 days in the event of a power outage - This is not strictly necessary to make it work. I had a test set up that I put together at home, which, with some help from Alan, confirmed to me that I was able to make it all work and eliminated the risk of leaving my tenants for an extended period of time without the ability to open the front door. The wiring harness for the panel comes with 5 wires, which looks daunting. I only needed to use the Green (NO) and the Blue (COM) wire for my situation. I was able to replace the old panel with the new solution in about 4 hours. One thing to note; I do not have an ethernet connection at the front door; The GBF Sentrylink only works with a hardwired connection (no WIFI) - To resolve this, I purchased the Netgear Wi-Fi range Extender EX6120, which allows me to create a hardwired connection to the Sentrylink by connecting to my WIFI network; This seems to work fine. I did also separately purchase the UHPPOTE Power supply for the door strike, since the Sentrylink does not supply power to the door strike.- Operational UseAll tenants quickly adapted to the new Access control system; We decided to encourage the use of NFC keyfobs vs. PIN codes to unlock the door from the panel. The other owners had some concern that PIN codes are too easy to share with others. The PIN codes can be used (i.e. you cannot disable this - you can only disable the feature to issue temporary PIN codes), but from the Admin website, I can tell that nobody is actually using these - Only the keyfobs are used. All tenants need to install the Doordeer app, creating an account with the same Email address that is set up by the Administrator on the Admin website; The App is basic, but works fine. I did receive a few cases where, as per the tenants, the Doordeer App on their phone did not notify them when someone rang the doorbell; These cases are under investigation; They could be related to phone settings, user error or internet connectivity.SummaryOverall I’m very satisfied with the GBF Sentrylink panel;Pros:Cost effectiveGreat supportSolid / sturdy and attractive access panelCons:Doordeer App is basic