iGreely Solar Panel to 8mm Adapter Cable DC 8mm Connector with DC 5.5x2.5mm Converter for Portable Backup Power Station GZ Yeti Jackery Solar Generator 14AWG 6ft

No issues with the product.

Greely, as always (as in other purchases) good quality and works perfectly.

Woot (an Amazon subsidiary) had the ACOPower 100w monocrystalline panels on sale for $50, so I bought one to go with a Jackery Explorer 290 I'll be using this summer.I had a different style of solar plug setup and didn't want to rewire anything, so I just went with buying this, and it's perfect with respect to the Jackery plug fit. Since the Jackery unit I own only charges up to 90W or something I'm fine with the wiring, though if I were doing four panels in series for a better model, I'd probably want larger gauge wiring.It seems there's a common theme amongst manufacturers of these aftermarket kits: adapter plugs (which fit onto wired plug ends) aren't the way to go if you're hooking up a solar generator. Buy this one for a Jackery or something with the 8mm plug (7909?). If you have a different solar charging generator plug, buy something else.

Not sure why I haven't reviewed this yet. This wire almost burned down my garage. The seller stood behind the damage, refunded the cost of the cable & referred me to where I could file a claim for my destroyed blueitti, but I would not use one of these again with a bluetti for fear it would happen again and end up taking 2 cars with it. Not fun trying to replaces vehicles these days.I have updated my review. If you so much as turn one of these power stations with the wire still in the front, I can see how easy would be to bump these enough to cause this to be an issue later on. I'm not saying this is how this happened' but I will be removing everything up front on m bluetti even if I'm only just rotating it a bit to get at the back..These types of plugs are too tender for these applications, regardless of who you buy them from. The units weigh in at over 40 lbs many of them and the wire can too easily be harmed if you bump the unit while the wire is still in there, even if you're just moving it a little. The seller was very responsive in this matter.

Cable connector works great with Ecoflow 100W IP68 rigid panels.Waterproof when left outdoors as long as the DC barrel is not left in standing water.Did not try the little plastic adapters because of negative reviews on those.Works with Jackery extension DC cables that mate well, and no issues after 10+ uses.

Very nicely made cable. I only use it to go from my solar extension cables to my battery. Cable is sturdy but pliable. Its joined most of the way and splits near the mc4 connectors. I've purchased many cables from this company and have not had any issues.

It will not connect to my panels. I'm fairly sure my panels are correct because they do connect to a standard charge controller.EDIT: So, after more research, the connectors will work; they are just labeled wrong. The positive has a - sign and the negative has a + sign. I'm open minded and okay with trans folks, gay folks, and even people who listen to country music, but this is a step too far. Society will crumble.

This was the second attempt to find a cable that connected to my three solar panels. I have a 30 watt, 55 watt and a 100 watt. All with mc connector’s. All three solar panels connected to this cable fine then I connected the 8 mm plug to the Jackery power stations. All worked great. What a relief. Go with this cable. Don’t try and save a couple bucks. Not worth it.

This cable is garbage, bought to charge my Jackey 240 explorer with an eco worth 100w panel. The red wire is labeled negative however it is positive. The diode was blown in my cable and I had go replace it. After replacing the diode and testing the wire with a meter I did make it work. However who in the right mind would label a positive cable as negative. These people are rediculas. DO NOT BUY From this seller. You could get electrocuted!

I'm using this on an Anker 535 PowerHouse to hook a small panel into it. Works perfectly, and the cable is well made. Not much more to say since it just works!

Fantastic quality and works well with my jackery 240. I have a 120w pannel and it worked perfect

The cable itself is well made and without an adapter works fine on a Jackery or CTechi station but the reason I got it was for use on a VTOMAN station and the adapter failed after only a couple of days use due to poor quality contacts on positive side.I bought it as thought it was good quality and it stated that adapter was suitable for 5.5mm x 2.1mm station but clearly it is not and was also a little slack although it worked as stated for a couple of days.After a few messages (first one was ignored) I got a refund which was fair enough. If you need a cable for a VTOMAN station then get one which has the correct plug on it without the need for an adapter.(5.5mm x 2.1mm)