Muzata 6Pack 3.3FT/1M Excellent Spotless LED Channel with Thicker Milky White Cover No Hot Spots Sliver Deeper LED Strip Diffuser Channel U108 WW 1M

Looks like it would work great, but the covers do not fit the channels. The rounded cover is rigid from side to side and will not give at all to snap into the channel. The edge overlaps the of the channel and no amount of squeezing or manipulation will force the cover into the channel.Edited to add: Muzata quickly replaced the channels, and the new shipment worked perfectly. It took just a couple minutes to install with lights. Excellent customer service

This was my first time using this channel and I was highly impressed with the construction and how the diffusor provided a truly "neon", uniform light. As you can see from the photos, the channel was installed in a hallway closet and the mounting location meant the homeowner would see the fixture directly. For that reason, we needed a channel that would provide "spotless" light, and also distribute the light in a semi-circular fashion. This channel does precisely what they say it does, and also has a fantastic, stylish, curved milling on the side, with a substantial feel. Highly recommended and I'll use it again. Note: a number of folks have said they were disappointed with the channel not providing "spotless" light. That effect is a function of the diode density on the LED tape, the height of the channel (distance between the diode and the diffusor) and the diffusor density and opacity. I used a tape with 120 diodes/meter, and the effect was truly spotless at all viewing distances. You simply cannot match any LED tape with any channel and get a magical, mythical outcome of no visible diodes. It's more complex than that. In short, use a tape with at least 60 diodes/meter and you'll get a very good outcome with this channel.

I would recommend using 144 pixels/meter strips with these. These genuinely do not have any hotspots, but the cost you pay for that is a loss of brightness. The diffusor is fairly thick, which more evenly distributes the light, but also reduces the luminosity. Others have suggested 60 pixels/meter, but I would actually suggest going to 144 pixels/meter, which is what I am using. With that pixel density they are still quite bright, and color chases are truly seamless, creating that TRON look.Do note that if you go to 144 pixels/meter, you're going to draw a lot of current. For 1 meter you're looking at about 1.6 Amps @ 12V on full white, so about ~20 Watts per meter. Make sure your power supplies are up to snuff. I'm using 1200W HP Server Power Supplies.

Went through a bunch of different products and found these to be the best in terms of diffusing led tape lights. Other products diffusing properties were lacking, very thin plastic "lenses" these are much thicker. However these did lower the output of the LEDs . I used 60 led strip, would recommend 90 or 120 if you want really bright. The diffuser is hard to cut. I used a power miter saw and cut it alongside a piece of scrap wood or the diffuser would break. Or use a jig saw with metal blade for straight cuts

I love these! They do a great job of diffusing if you use at least 60LEDs/m. Obviously the more the better, but if you're using 30LEDs/m (most/all Govee products), you will still see hotspots.I grabbed these to use for under cabinet lighting in the kitchen. I cut them to size using a table saw. Turned out great!

If you have LED strip lights, these are a must have. No matter which strip lights you have, I can promise you these channels will improve the look.However, to have the perfectly smooth/gradient look you MUST have at least 60 LEDs/m LED strips. With 30 LEDs/m (the most common you find off Amazon) you will definitely have a bit of spottiness.Once I acquire some 60 LED/m LED strips I will update this review and post pictures with both 30 and 60 LED/m for comparison.

Should have read / measured more closely, but these channels are too small for Philips’s hue light strips. Also, if you just hold the diffuser over the light strip, they clearly do not provide spotless diffusion for Philips hue light strips.

Used this for a few projects now. With the right led light, it gives a nice neon tube look. Absolutely zero complaints. It’s a solid honest product. They give you all the hardware you’ll need, it’s packaged nicely, it’s at a good price, and it’s just a good product. Good stuff