iGreely5.5mm x 2.1mm DC Male Power Plug Cable for Portable Generator 14 AWG Wire 3.3ft/1m (Male)

This is a nice cable that works well to connect my solar cells to my equipment with Anderson PowerPoles. Easy to install and work with, now if I can stop misplacing my cables.

Heavy duty, good piece.

It's a good quality assembly and nice and easy to reconfigure the Anderson connectors as your equipment requires.

I bought this cable to add to my amateur radio kit to connect my QRP radio from internal battery to a larger external. Happy.

I purchased two of these and they were exactly the same, 100 cm tip-to-tip. The 14 AWG wire will handle 15 amps and have less than a 2% voltage drop at 13 volts at one meter. Thus, not a problem if only pulling 10 amps at that voltage. I plan to use these with 12v LED flood lights that draw less than one amp and provide 800 lumen (60w) of light each.You do have to adjust the power poles to be side-by-side which is not a problem.* I purchased two of these to use with my Ecoflow Delta 2 DC5521 three amp ports. While both DC5521 barrel ports are three amps simultaneously, they are shared with the 12v vehicle charger port of 126W max all combined. Basically, if you're pulling 10 amps using the 12v vehicle power port, there's nothing left for these two ports. If you do plug something in, you'll have reduced voltage and amperage and that can be very bad for many devices.

This is a solid, well made cable to connect Anderson Powerpole connectors to a 5521 plug, useful for connecting Powerpole-equipped devices (like ham radios) to a power station. The glitch is the arrangement of the Powerpole connectors. The standard in ham radio is for the connectors to be side-by-side. For some reason, the connectors on this cable are stacked top and bottom. (In the photo, my radio's connectors are on the left, the default arrangement of the cable is on the right) If you know how to work Powerpoles (and if you're buying this cable presumably you do), it's easy enough to take the connector apart and rearrange them. I wish I had read the comments about this cable before I bought it; it would have stopped my annoyance at the cable not working the first time as I expected. Still, a good cable and an easy fix, if you need to.

Great product, speedy shipping, great description

Bought this to use a power station to charge another battery. Had to buy some 5525 to 5521 adapters for it to work on one of the power stations I have. But works with no issues. Will allow me to charge a battery at around 50 watts.