RejuvenateProfessional Wood Floor Restorer and Polish with Durable Finish Easy Mop On Application Satin Finish 32oz

I have white oak floors that are less than a year old. I noticed the poly was wearing in the kitchen (hi traffic). Before going to manufacturer I wanted to give this a try. Wow, amazing how amwell this works. My floors are satin so I used the satin. Cleaned floors very well getting all dirt out of the "distressed" areas. Two coats with microfiber two hours apart and they literally look like new. I realiz this isn't urethane and if I need to redo every 3 or 4 months I still give this five stars . It takes 10 minutes to apply and that's it!

Sure wish I had learned about this product years ago before my once beautiful hard wood floors began to deteriorate! I am amazed at how great they now look after using this product. So simple to use, odorless and beautiful results. And so far the satin shine has remained. No dulling, yellowing and no new scratches. My old floors look new again without sanding. Even the worn areas are less noticeable and seem to blend naturally with the mostly undamaged portion of the floor. I would give this product 10 stars if I could!

Vacuumed and cleaned the kitchen floor prior to application. Used a new cloth head flat mop to apply this sealer. Just poured the liquid on a small area and spread it on. Dried easily within an hour - left the slider door open an inch to have a fresh air flow to perhaps help dry. No odor to the product, no streaking. Ordered the satin as opposed to the shinny option and very pleased as it blended nicely with the flooring beyond the kitchen. Put a 2nd coat on about 3 hrs later. Little old lady did this all based on the recommendations of a young contractor. Very pleased. Refurbished the floor's finish nicely - certainly not brand new but major improvement.

Good product but the wood restorer bottles are not compatible with the "click-and-clean" bottles even with adapter. They don't say c&c compatible and if you try to insert into the bottle holder, they don't click in and will leak all over. Dries quickly, cleans well and seems to fill in most - but not all -- scratches.

It's amazing and covers scratches so well. I used Satin shine and love it!! Dries quickly and easy to use!!

I bought this because I didn't feel like sanding my floors in order to put a new coat of polyurethane on them. My floors are pretty worn so I was hoping this would work out.Price:About the same as a gallon of polyurethane which is okay. Could be a bit cheaper considering this is clearly not on normal polyurethane's level in terms of durability.Ease of use:Twist off cap, but needs a pour spout considering how liquidy it is (it is a bluish White glue like appearance.) Pouring directly from the bottle causes it to splatter everywhere. Dries clear in an hour it's good enough to walk on. After 2 hours you can apply another coat. I recommend two to three coats as if it's normal polyurethane especially since this product is so thin.Features:It hides some surface level scratches, but if you look at it at a certain angle you can still see the scratches. Deeper scratches require more coats. With big gaps or holes you should really use wood filler then stain it to the same color as the wood, then sand it before applying this. My floorboards in the hallway had small gaps because the filler in between was missing and this product failed to fill those gaps mainly due to it's water like consistency.Durability:After each coat I walked around on it and didn't leave any marks or anything as I walked. I noticed that even though my shoes were dirty they weren't leaving noticeable dirtprints on the floor which is nice. I haven't moved furniture around on it yet as I'm giving it a few extra days to dry before doing anything big. As stated earlier it's watery & applies thin so I doubt it'll stand up to any heavy duty use or heavy furniture moving across it.Overall:While it's rated to last a few years I doubt it can take that much of a beating. It's very easy to use & cheap, but I'd consider this as nothing more than a way to pretty up the floors before you sell a house. If possible lightly sand your floors then use normal polyurethane for a more durable solution.

This stuff is amazing. I have wooden stairs that are finished with carpet runner. The wood exposed on the steps was all dried out. The wood was faded. It was very horrible looking. I didn’t feel like spending a fortune having someone come in and refinish them and I’m so glad I didn’t and got this product. I actually used three coats and they look absolutely amazing. I’m so happy I tried this. I highly recommend.

Ripped up carpet to find great quality but dull wood. This product brought it back to life. I didn't use their cleaner or cleaning pad. I mopped 4 times with our regular Swiffer Wet Jet wood floor cleaner, making sure it was dry in between. I followed that by 3 coats of Rejuvenate Satin (with at least 2 hours in between) using a Rubbermaid microfiber mopping pad. I think it turned out great and was a cheap and easy update!