HEADLIGHTSDEPOT Black Housing Halogen Headlights Compatible with Dodge Dakota Durango Includes Left Driver and Right Passenger Side Headlamps

Not sure where all the negative reviews are coming from, these were fantastic compared to the damn fog lights.1 bolt top inside corner, one bolt either end bottom front, above bumper. Mine were 10mm socket, 12" wobble extension, 1/4" drive w'/ratchet worked slick. Slid in between bumper and old headlight kind of snug on left side, piece of cake between bumper and new light going back in on right side. Seriously folks it wasn't a problem. If the bolt falls out of your socket behind the bumper, during installation, stick a piece of masking tape over the bolt head so it sticks in the socket. Either bolt can be reached from the bottom with ease if the socket sticks.Only other tool necessary was a #2 Phillips screwdriver, I used 2, a stubby to screw mounting brackets to back of the new headlight. And, a long one to turn the adjustment screw that a bunch of folks say doesn't work. It worked beautifully on mine; I have no clue what they encountered.Instructions, although not really necessary, were included in the Left headlight box. Start on the driver's side if you're easily confused. Had the right one in and ready to rock on the other when I found them.3 bolts to remove, 1 mini-lamp socket to twist out and install where the little sticker says "Remove" on the new headlight, 3 plugs to unplug and plug back in. Wires were long enough to make it all easy. New headlights you have to install and tighten 2 screws, in 2 brackets, for the bottom mounts, the brackets are identical and they only work one way. Put them on before you plug all the wires in.Aside from my vehicle appearing to have sustained minor front end damage at some point and having a wrong body screw in the left headlight, and attempting to replace the fog lights while the headlights were out, only to discover they are a pain in the ass, did NOT come with instructions, and there was one wrong fog light in the package, it was maybe a 15 minute job tops.While I did encounter complications on the job, none of them were on the part of these headlights. Great product, they seem to be very well built. Serious improvement in driving after dark. Look Great!! Work Great!! I couldn't be happier with them!! Would not hesitate in the least to recommend them.

After trying some Chinese junk in here I finally found this headlights depot product. Fits perfect. Made of sturdy pvc not Chineseum. You’ll need a long extension and that’s about it. Fit my 04 Dakota perfect.

When I was looking for a different headlight assembly that would show the road better at night. Every single different one. From different company's I looked at said in the reviews that they had nothing but problems with the install. Things didn't line up. Didn't come with any kind of mounting brackets or direction. All kinds of things. I almost said screw it when I seen these head lights. I don't think I read one bad review..these were alittle more expense then the rest. But I tell ya. Well worth the money.you get what you pay for when it comes to these lights. I would have paid alot more. I had the old crappy lights out and the new ones in In less then thirty minutes. Even did it in the dark of night. And wow..they show the road better then the led lights I had in there. I'm very impressed.and these lights come with light bulbs and directions. We're nobody elses did. Don't waste your time with any other light assembly. you won't be disappointed with these ones. I know I'm not. And they look really good on the truck too.

Installed these on my 02 Dodge Dakota. Read lots of reviews on cheaper options and decided to spend a little more hoping for an overall better product while requiring no modifications.Pros: They were easy to install. Took roughly 40 minutes. They came with all the bulbs and sockets except the small marker bulbs, however the OE bulb and socket fit perfect. The headlights are easy to adjust after install. Turn the Phillips adjusting screw left to raise the lights and to the right to lower the lights. The assemblies themselves have a great look to them and don't seem cheap.Cons: The ONLY issue I have with these headlights are the gaps in the top outside corners between the light and fender. The alignment pins and alignment balls don't reach the designated holes which allows the assemblies to be slightly loose. This is almost a deal breaker for me. I will either be modifying the supplied metal brackets to decrease the gap or returning the product.

Lights look awesome. As far as aftermarket light for Dakota’s go these fit the best

The stock headlights are a two piece which allows you to access two mounting bolts on the bottom of the headlight. This is a one piece which is easy to install but is pretty sloppy and moves around due to it only having one bolt holding the entire headlight. Also the BLINKER DOES NOT FIT. The stock bulb housing will not fit inside this headlight because it has 4 nubs that hold it in but this headlight only has cut outs for two. Make sure you check and see exactly what you have on your vehicle before purchasing to make sure they will fit.

These headlights definitely give a front end face lift! They look great packaging was outstanding. Install was super easy took about 40 minutes to remove old and install new. The mounting was a little shifty but got all bolts started and then tightened them all down. Now as to see how the longevity of these are. Great product for the price so far

big improvement