🚀 Elevate Your Hobby Game!
The HOBBYWING Quicrun 1625 Brushed ESC is a high-performance electronic speed controller designed for hobbyists. With a continuous current of 25A and a peak of 100A, it supports 2-3s LiPo and 6-9 cells NiMH batteries, making it ideal for 1/16th and 1/18th scale touring cars, buggies, and monster trucks. Its compact size and lightweight design ensure easy handling, while the automatic operation mode enhances user experience.
Item Weight | 0.1 Kilograms |
Item Dimensions | 5.31 x 2.25 x 3.5 inches |
Size | Small |
Material Type | Plastic |
Theme | Hobbies & Recreation |
Battery Type | Compatible with 2-3s LiPo or 6-9 cells NiMH batteries and designed for use with 280, 370, or 380 size motors with varying RPM limits. |
Operation Mode | Automatic |
Educational Objective | Coordination |
Power Source | rechargeable battery |
C**S
Works well.
Another good product from hobbywing. Fit my rc vehicle well and with better specs. I would purchase again if needed.
R**E
Hobbywing quality never disappoints!
Used this brushed esc in my sons redcat volcano 16. The little truck came with a 2 in 1 esc/receiver combo . Because of that , it came with a five wire servo. We have two of these trucks for our boys and both have had steering issues from the get go. I used this new Hobbywing esc to replace the stock one. I was also able to get a better , three wire servo, and better transmitter/receiver combo . The truck has much better acceleration and I’m getting longer run times out of the batteries. The esc is staying nice and cool under hard use as well! The only thing that could be better is to be able to adjust the esc settings . It has the jumper to switch from nimh to lipo batteries but that’s it. No punch settings or voltage cutoff adjustments to be had. Although I understand cause it was a cheaper esc . Definitely still worth the buy!
M**R
Awesome little brushed ESC
Like all Hobbywing ESC's this one is perfect if you use it for it's intended purpose. It's only rated at 25 amps, so it's best for lightweight models such as 1/14 and smaller. I put this one in a 3DSets semi, and it works perfectly for that purpose. I've never had any issues with any of my Hobbywing ESC's, and I have a bunch of them. You can't go wrong choosing their products to power your models.
T**S
A little bulkier than expected, but nice ESC with 2 problems
Reliable, small package (a little bigger than expected for a 1:18 custom built buggy, but the size is not really a worry). I ran into 2 main issues:- the reverse MAX and forward MAX speeds are extremely different (reverse is <50% of the forward). Hobbywing should have let users set up their curve enpoints and allow us to do what we want. I ended up setting my reverse EP in the radio to 125% so I get a little more juice while backing. I just dont understand some of these decisions that manufacturers make- no EP programming on the ESC, most ESCs allow you to put the device into EP programming by adding power with high power, then set the low and high points. So if your radio's default EP's are a bit different than others, then you can still get the best out of the ESC. Instead this ESC will just take the power-on throttle as mid-point and you're up for a big surprise when you let the throttle go after it initialized with a high throttle (will get a full blast reverse).Because of these I'm still thinking of getting a different ESC that I will use long-term.
P**L
100% reliable and smooth power delivery.
The media could not be loaded. I have Hobbywing ESCs in all of my R/C vehicles. This brushed ESC has been 100% reliable in my stock class Losi Mini-B carpet race car since I bought it in October 2022.Tip - To eliminate some weight and make it easier to use, you can cut out the on/off switch and just solder together the wires. Be sure to cover them with shrink wrap.
C**G
Works flawlessly!
Perfect for SCX24 esc/reciever replacement. Pair with a dumbo reciever and you will be very happy. The original horrizon esc/reciever doesn't last more than a month and you will need to replace it. Save yourself the headache and wasted money and get this esc and pair with a dumbo reciever. They both fit perfectly in the SCX24, even with the injora rocky buggy body mod. I LOVE HOBBYWING I have their electronics in my kraton exb, hbx 18889a, and scx24 I have never had an issue with their products. Hobbywing for the win!
J**.
Works Great
I have this on my 1/16th scale buggy and it works great with my 370 motor. I bought the 1060 version before and thought all brushed esc were all the same. The 1060 version of this esc did not power the 370 motor correctly. It felt like it would run on limp mode intermittently. This 1625 version fixed my problem and the motor runs great.
T**N
Don't expect much for reverse
I got this item because of the value and reviews but I must have gotten a bad one.I hooked this up to my micro crawler and although it has a decent crawl speed compared to my previous one there seems to be little to no brake when simply rolling down a hill.It also provides VERY little power in reverse. If it comes up to even a clump of grass it stops. Heck, if you TURN your wheels while in reverse it almost stops.Very disappointed in this one. Great value for going forwards but crap for brake and reverse...
Trustpilot
1 day ago
4 days ago