All EndDings kits include: The Protective Film(s), Spray Water Bottle, Squeegee & Instructions. All EndDings protective films come in standard Heights of 4", 5", 6", or 7" and two Lengths of either 60" for full size bumpers or 24" for half size bumpers (2 pieces). If in doubt, it is always safer to choose the next size narrower Height film. The Length of the film can be cut shorter, if necessary, prior to installation. In order for the protective film to attach well to your bumper for an air tight seal, it is necessary for all 4 sides of the film to have at least 1/4 inch space from any edge of the bumper before any "interruption" or break in the bumper's design. The bumper must be constant and continuous, without any interruptions or breaks in the bumper's design, for an air tight result. Some bumper sensors may become disabled and not work properly if covered by the EndDings film. We recommend having the endings film installed right below or above the bumper sensors.
D**O
Extremely easy to install and looks good
I bought this Bumper protection film to protect the sides of the Front bumper on my brand new Nissan Sentra. Before purchasing this, I called their LA office and spoke to Isaac and he was extremely helpful and told me what was and wasn't possible with Enddings. So he sent me a picture of a new Sentra with diagrams on how the film should be positioned and installed.I received the film within 2 days which was great. I then proceeded to install the film. It was so simple. It came with instructions as well but just to give you an idea, this is what I did.1. I washed my bumpers thoroughly and wiped it till I was satisfied that it is clean.2. I already knew that I only needed 20 inches so I cut 4 inches off both of the films with a pair of scissors.3. I used the included spray bottle and filled it with water and sprayed the bumper.4. I then just put the film on the side of the bumper and positioned it the way I wanted.5. I then used the included film plastic applicator tool and pushed out all the bubbles and smoothed it out.6. I wiped the bumpers dry. It took me 10 minutes to clean, cut and install one side. If you have ever installed a screen protector on your phone, you already have the skill to install this.Pros:1. Ridiculously easy to install.2. Sticks very well just like an iPad Screen protector.3. It is clear and shiny so although a little visible, it does not really attract attention.4. Most importantly, thick enough to actually protect your bumper. Unlike the 3M film I had installed on my other car.5. Very easy to remove and reinstall, just like an iPad screen protector.Cons:1. It does not protect the entire bumper. It will install in rectangular strips to the most vulnerable areas of your bumper.Summary:Yes, it is not almost invisible like the 3M film, but if your goal is to protect your paint and bumper from dings and scratches, this is an excellent choice since it has the toughness and thickness to actually provide protection. It is very discreet and gives me peace of mind. Highly recommended.
D**O
Extremely easy to install and looks good
I bought this Bumper protection film to protect the sides of the rear bumper on my brand new Nissan Sentra. Before purchasing this, I called their LA office and spoke to Isaac and he was extremely helpful and told me what was and wasn't possible with Enddings. So he sent me a picture of a new Sentra with diagrams on how the film should be positioned and installed.I received the film within 2 days which was great. I then proceeded to install the film. It was so simple. It came with instructions as well but just to give you an idea, this is what I did.1. I washed my bumpers thoroughly and wiped it till I was satisfied that it is clean.2. I already knew that I only needed 20 inches so I cut 4 inches off both of the films with a pair of scissors.3. I used the included spray bottle and filled it with water and sprayed the bumper.4. I then just put the film on the side of the bumper and positioned it the way I wanted.5. I then used the included film plastic applicator tool and pushed out all the bubbles and smoothed it out.6. I wiped the bumpers dry. It took me 10 minutes to clean, cut and install one side. If you have ever installed a screen protector on your phone, you already have the skill to install this.Pros:1. Ridiculously easy to install.2. Sticks very well just like an iPad Screen protector.3. It is clear and shiny so although a little visible, it does not really attract attention.4. Most importantly, thick enough to actually protect your bumper. Unlike the 3M film I had installed on my other car.5. Very easy to remove and reinstall, just like an iPad screen protector.Cons:1. It does not protect the entire bumper. It will install in rectangular strips to the most vulnerable areas of your bumper.Summary:Yes, it is not almost invisible like the 3M film, but if your goal is to protect your paint and bumper from dings and scratches, this is an excellent choice since it has the toughness and thickness to actually provide protection. It is very discreet and gives me peace of mind. Highly recommended.
S**.
otherwise great product. I read there was a problem goin ...
Only thing I got against the ones I bought is I wish they were a little longer length wise,otherwise great product. I read there was a problem goin thru car washes,I had same problem with the first ones I purchased,now I just made it a habit of checking when drying car. All in all,good product.
A**S
works well.
works well. I put it on the back bumper of my 2014 prius and it protected the finish from the idiot san francisco parkers who actually left their car touching my bumper
P**Y
Waste of money
Could not get it to fit or stick. Came right off after 2 days. Waste of money. Does not fit curvy bumpers. Hard to find anything to protect paint.
D**Y
Great protection
This stuff is great. We put it on the wheel wells of our new pickup bed to protect them when loading stuff. Very thick and forms easily on curves. Thinking of where else we can use more of this.
G**!
Very easy to apply
Hardly know it is there. Very easy to apply. Too soon to know how long it will hold in place.
A**N
Two Stars
They bubbled up from the start and fell off in a couple of weeks.
Trustpilot
2 months ago
2 weeks ago